Location for cable is broken on partner Toshiba Stor.E
Hello
I have an external drive of 500 GB Toshiba Stor.E partner and the location where you put the usb cable is broken.
Can I order this part separately? I opened the folder and there is a small card that converts USB to power in S - ata. This card can be replaced?
Kind regards
Erik
As far as I know these parts cannot be ordered. To be sure of that, you can contact the closest service Toshiba and ask if something like this is possible.
If the HARD disk is OK I think you can buy another 2.5 box and put the HARD drive inside.
Tags: Toshiba
Similar Questions
-
Partner Toshiba Stor.e 2.5 "power USB3 problems
I had the partner Toshiba Stor.e 2.5 "external hard drive USB3 for about 5 months and couldn't be happier... until tonight.
I have it plugged into my laptop Satellite Pro and nothing happened. It seems that the fault is where the cable connects to the device. If I pull the cable up the light blue lights and voltage of my hard drive, when I let go the power ceases.
It seems that the connection of the device is quite fragile and I can move it up and down easily.
I took care of the product and have not been subjected to undue constraints so I'm not very happy.Has anyone else had this kind of problem?
Is this a design flaw or a single random problem?Can it be fixed?
Thank you very much
Mallrat 999Hello
You you connected this external USB HDD two USB ports on your laptop?
I think that you must use a USB cable to Y that allows to connect the HARD drive to two USB ports, because this HARD drive needs 900mA.The common standard USB 2.0 port (I guess that your laptop supports only USB 2.0) provides 500mA and usually is not enough for the USB 3.0 HARD drive.
Another solution could be the use of the USB hub using an external power supply.
-
Laptop does not partner Toshiba Stor.E disk external HARD
Hello
I just bought a new laptop.
Pavillion touch screen 14 inches 14-b141sa sleekbook and recognizes the external hard drive, but only in the devices section. It's Windows 8I get the following when I try to solve problems. Is there anything else I can do as I have a lot of data on this hard drive
Thank you
M
Hardware and devices
Publisher details
Problems found
USB mass storage device has a driver problem
Not fixed
Not fixed
Reinstall the device driver
Completed
Hardware changes may not have been detected
Detected
Detected
Search the recent hardware changes
Completed
Potential problems that have been verified
Update of Windows configured to never install drivers
There is no question
Problems found
Details of detection
6
USB mass storage device has a driver problem
Not fixed
Not fixed
There is a problem with the driver for USB Mass Storage Device. The driver must be reinstalled.You have a Stor.E HARD USB 3.0 drive partner?
In this case, you should check if enough power is supplied to the USB HDD.Usually the HARD USB 3.0 drive needs about 900 my power. The USB 2.0 port common only provides 500mA.
So in this case you have to connect the HARD drive to two USB 2.0 ports using a USB Y cable -
Satellite Pro A300 PSAJ5C - power cable is broken
Power of PSAJ5C 00J00W of my Satellite Pro A300 cable is broken. Which cable buy to replace?
Do I need to buy a special model or simply a Toshiba cable?
Thanks for your help!
Hello
Do you mean the adapter?
I advise to use original Toshiba adapter because evil or not compatible adapter can damage the motherboard or would have an impact on the functionality of the laptop.
Check the part number of your old sector and google for this adapter usually some online dealers should provide such part otherwise you can get in touch with a Toshiba ASP in your country to get compatible part.
The specifications are: DC 19V 6.32 A (part PA3290E-3AC3 number)
-
Toshiba Stor.e partner 1 TB, clicking and does not
I've had my Toshiba Stor.e partner 1 TB external hard drive for only less than a year after going on holiday with her in my bag I go back and it does not work. Even when I plug in the USB 3.0 slot is all for that click.
Sometimes the computer recognizes it is connected with the noise but he then instantly disconnects again.
Any help will be greatly appreciated.
In my opinion, you should contact your local dealer and make a warranty claim.
On this virtual path, I can't say for sure if the HARD drive has a hardware problem but this clicking noise is very suspicious to me. -
How can I change the looks of Access Infrastructure Web location for the virtual machine files?
My default is set to MACHINES C:\VIRTUAL. But I want to change it to turn to an external drive connected with an eSata cable. Can I do this?
Hello
Add just like a new data store.
Login to your web access, select your host (not the virtual machines) in the left menu.
You should see a link on the right side with "Add data store", give it a name of store and add the directory.
Now, you can add a virtual machine to this place.
Good luck!
--
Wil
_____________________________________________________
Visit VMware developers at http://www.vi-toolkit.com wiki
-
Can I use Toshiba Store E TV for backup?
I would like to know if I can use 'Toshiba Store E TV' device to back up my files on the computer, such as the use of an external USB drive?
Hello
Of course, you can take the TV Store.E to back up the files. The HARD drive has a USB interface which means you can connect your laptop or a computer via a USB cable and save the files on it. :)
If you have any other questions, please let us know!
-
Toshiba Stor.e Partner - cannot find Nero serial number
Hello
I try to install my new partner of Toshiba Stor.e 1 TB on my Windows Vista computer and the installation, it asks me a Nero BackItUp 12 Essentials serial number to validate.
I assumed it would be the serial number on the bottom of the HARD drive and the packaging, but it does not work. He is not on any of the leaflets that came with it and cannot find any info on the user guide.
Anyone know what I'm missing here?
Thank youIf I understand your message, you have found the serial number, but it does not match with your software. Right?
Are you sure that you have entered the number correctly?
Perhaps you the number of faults striking or mixed numbers like 0 and o or i and l
Check again.You can also upgrade the Nero software to the latest version
How? Check out these links:
http://APS2.toshiba-tro.de/KB0/TSB14034U0000R01.htm
and
http://www.Nero.com/enu/products/Nero-BackItUp/upgrade-to-Nero-BackItUp.php -
I want to set a password for the Toshiba StorE Art3 500
Dear Sirs,
Toshiba storE Art3 500 GB external hard drive, I bought and I have the following problem: I would firstly a password for opening, but hard drive ever asks me the password.
Pls let me know what I need to do that he asks me a password for opening of the disc, or when you open the files stored.
Thanks in advance.
Hi mate
AFAIK the Toshiab STOR. E ART 3, 2.5 "includes pre-loaded® NTI BackupNow EZ Software.
http://www.nticorp.com/en/us/product/backup_now_ez.aspThis software helps you secure and back up data. It provides a system and file & folder backup complete.
It seems that only the backup can be secured with data encryption and protection of password (up to 256 - bit).
Check this box:
http://www.Toshiba-multimedia.com/global/manuals/store/datasheet/STORE_Art3_Datasheet.PDF -
The same drive letter may point to different locations for different processes?
The same drive letter may point to different locations for different processes?
Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.
There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.
I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.
Thank you
Dan
Hello
The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
I hope that helps!
-
every day, I find my password for hotmail changed / broken
every day I find my password for hotmail changed / broken. I answered my question and change it again but it again.i do not want to disable my account however of the changes... What can I do
Be sure to change any answers/questions you can use to reset the password and all the e-mail addresses that you entered alternative.
Change passwords on accounts that use the same password for your Hotmail as well.
Could be that a person is reset using the mechanisms you configured and have not changed (or they have configured to send emails besides as well.)
-
Cannot specify a different location for multiple-image backups.
I want to record several image files on an external drive (which can contain a large amount of data)... It was suggested to specify a different location for the second image... but when I run the process of backup image... first a screen shows my external drive where the image will be stored... but then the screens seem to just continue to do a backup. I don't see any place where I can change the location of the image... It keeps on the re-write on the last saved... image I think that maybe you can change the location of the regular backups... but not for the image file... its on another screen or buried somewhere... the help screen with "attention, images can be replaced" is meaningless for me... I thought he said that it would only replace old images if there is not enuf room on the disc.
thanx
Steve
Hello bichon,
Thanks for posting on the Microsoft answers Forum.
Look at the post below which asked questions on images and backup locations.
http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/338e311d-c0fc-4c56-a4c2-b25a7028188b
With this option, below is where you can make changes.
Select the drive to destination or optical disk or network location to store backup files. (this is where I want to change the destination directory name).If please reply back and let us know if this helps answer your question.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Possible to send location for BlackBerry maps using the cards: / / URI?
I was wondering, since we can launch BlackBerry maps maps: / / is there a way that we could send a location for maps of the URL?
As maps://Kingston-Upon-Hull
You can use ' geo:
, ' uri without the ' / /'. For example, this url should get you close to where I live:
Geo:46.29, - 72.66 -
How to recover the data pin and a location for visitors to the Web site
need help
I'm doing a project with asp.net blackberry
How to recover the data pin and a location for visitors to the Web site when he pressed the button on the web using asp.net?
so far, this is the only code that works for me to get a location in a web widget:
-
BlackBerry Smartphones mini sd default location for text messages
Is there a way to make the mini sd the default location for the texts?
I have AT & T and about twice a day, I get a message from the system:
"SIM CARD FULL, please delete SMS"
Hi and welcome to the forums!
Here are the steps to deselect the SIM card and save SMS messages on your device.
Please note that you cannot save on press card.
Thank you
Bifocals
SIM card is full please delete SMS messages
Maybe you are looking for
-
As above
-
Wireless guard disconnection on Satellite T110
Hi, I just bought a T110. Everything works fine except the wireless, it keeps disconnecting.I've read on the Web from Toshiba site is made to save energy, so I changed the network adapter settings so that it will go to off when running on battery pow
-
Restart the problem after booting on Satellite Pro L20 - approx. 4 seconds
I have a toshiba satellite pro l20 series and it worked fine until yesterday.the problem is that it restarts... Well actually, he stops in about 4 seconds after the start, remains closed for 1 or 2 seconds and then againsame problem occurs with or wi
-
amplification of the strain by using the cDAQ
Hello I am a newbie in the use of DAQ hardware and hope someone can help out me. I recently bought a cDAQ with the NI 9237 to measure the strains. The strains that I try to measure are very small 1 series micro. A bit of research showed me that I nee
-
HP Mini 110-1125NR - how to reset the bios password?
Hello. I have a HP Mini 110 1125NR and I forgot the BIOS password for it. The stop code is CNU9440K03. Any help would be greatly appreciated. Thanks in advance.