location in the Ridge detector indicator

Similar Questions

• Lock icon located near the battery usage indicator

  What does the lock icon located next to the battery icon?

  Which locks the screen to not change when you rotate the wide position.

  You can set that in the "Control Center" (slide up next to the Home button): the line from the top right.

• Ridge detector does not properly

  The Ridge detector not give me the right places. The main file is called activation time. I use the probe but cannot understand why im getting the wrong places. Thank you in advance.

  Your Ridge detector seems to work just for me.  I rewrote the vi to make summits that were detected more easy to see.  You put them all into a 2D array, which resulted in many many zeros.  I have grouped the data in a table of clusters.  Each cluster contained a table of the peaks for each line.

• Ridge detector malfunctioned.

  Hello

  I'm working on a project in which I want to calculate the rate of certain signals. I used the Ridge detector to detect the peak of the wave.

  The Ridge detector works properly, but after some time as 40 seconds it starts counting the noise (which is less than the value of the Amplitude, and which was previously not count), I don't know the reason for it.

  Can someone pls help me solve this problem

  Thank you v.much

  Hello

  Finally working on the first vi I found the solution to my problem

  The reason why I got for the evolution of the value of the rate was this picture filled, i.e. with time, the table gets more and more values and he took the time to work on it and therefore the vi give erroneous results in the rate.

  I finally limited the value of the table and then past this range limited to the consumers section of producer for the calculation and then it worked correctly.

  I ask everyone to answer me if I took the right path for the solution.

  Thanks to all who have helped me get a solution.

  Concerning

• How to find the location of the cursor in the channel indicator?

  Topic say it all... I would like to be able to determine the location of the cursor in a chain on my front indicator...

  Use the property node - to end and beginning of text selection.  The selection starts with 0.  In other words, a 0 means the cursor is located before the first character.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• LR5 - Map-Saved Locations-My places: the white circles indicating the situation of "my sites" appear no more. What can I do?

  Hello

  from one day to the other, the white circles and the dot in the Middle have disappeared. I couldn't find any setting to on/off. When I click on a location of the centers of the map to the location.

  Maybe someone knows what to do.

  Thank you.

  Rainer

  gvb279: you are GREAT! Thank you! The 'o' key is the solution

  Best regards

  Rainer

• ICF on Windows 7: how to change the location of the home network be connected?

  Windows on Windows 7 firewall - ' Home or work (private) networks are not connected and 'Public networks' are connected. This prevents the PC to be seen on my home network.

  How can I change the location of the home network be connected?
  I have internet access but cannot connect to a network.

  Go to "Network and sharing Center" > click on "Customize" > change the location of the 'Public', 'private '.

  Edit
  Sorry the above is garbage, I was on mode vista.

  Try, 'network and sharing Center' in the section 'Show your active networks' - it can show 'Public network' or 'work '. If, so click on the one which is indicated and select "home network".

  Note:
  If the other PC on your network are Win XP you can change the name of working group of win7 in "MSHOME".
  IE "network and sharing Center" > click on the arrow down to the network discovery > change settings > tab computer name > change.

• Find the child's location in the coordinate space of the parent

  I created a map of the counties of Montana.  Each county is an MC inside separate the largest parent movie clip (allcnt_mc).

  When the user clicks on a County, I would like to focus this country on the scene and the zoom to its measurement.

  The hard part has said the parent (allcnt_mc) where the tween to.  Given that each individual County is a child of the parent, they have their own coordinate space with reference to the parent.

  Is there a way I can query the location (x, y) of a child in the coordinate space of the parent?  With this issue, I could calculate the distanct between the point of current regulation of the parent and the child, indicating the distance that the parent will have to move to focus on the scene.  I tried to use localToGlobal but could not understand how to use it.

  //calculate the stage's center
  var stagecentx:Number=stage.width/2
  var stagecenty:Number=stage.height/2
  
  function tweento(e:MouseEvent):void{
       // the first two variables are referncing the county that was most recently clicked on
       var calledx:Number=allcnt_mc[xmlData.row.NAME[e.currentTarget.ivar]].x;
       var calledy:Number=allcnt_mc[xmlData.row.NAME[e.currentTarget.ivar]].y;
       // these variables represent the current location of the stage
       var allcntx:Number=allcnt_mc.x;
       var allcnty:Number=allcnt_mc.y;
       //  I'd like to then tween the allcnt_mc to the location of (calledx,calledy)
       //  but in the coordinate space of allcnt_mc
  
  
  
  

  var pt:Point = new Point (parent.child.x, parent.child.y);

  PT = parent.localToGlobal (PT);

  PT now has the parent.child coordinates in space of the parent coord.

• I have a Sony KP-61HS10 rear projection TV. No picture and the STAND BY indicator blinks 4 times

  I have a Sony KP-61HS10 rear projection TV.  No picture and the STAND BY indicator blinks 4 times. Is there a simple fix for this problem?

  Follow the steps below to troubleshoot the TV.

  1 turn off the TV.
  2. unplug the power cord of the TV from the power outlet.
  3. let the TV remain without power for 60 seconds.
  4 plug the power cord into the power outlet. (If the TV is connected to a surge protector or power strip, protector he remove the power strip or surge protector and plug it directly into the wall outlet.) If the problem is resolved, the problem is with the power strip or surge protector and not television.)
  5. turn on the TV.

  If the problem is still not resolved after following the steps above, it is perhaps an indication that the TV is for the service. Please use this link to locate the nearest authorized Sony service center in your area.

  If my post answered your question, please mark it as an "accepted Solution".

• How to disable location under the privacy services? My switch is freezed help kindly

  How to disable location under the privacy services? My switch is freezed help kindly

  Try disabling "Find my iPhone" in iCloud settings first.

• I do a migration and need to know the location of the file of passwords for Firefox, please.

  I'm migrating from an older system to a new system.

  I need the location of the password file, please.

  I tried to migrate and crush the entire Firefox folder, but passwords are not transferred?

  I can't use sync to the cloud. It is a secure laptop and the cloud doesn't offer sufficient guarantees.

  TIA.

  MJR

  key3db and logins.json: these are the password files.

  Both are necessary.

• MAR to location of the file has changed?

  Hello

  We use MAR patch files automatically Firefox by https://wiki.mozilla.org/Software_Update:Manually_Installing_a_MAR_file. However, the http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/ directory is no longer exists and has been replaced by a file README.txt document how to use web download.mozilla.org .

  Is there a new location for the files last update MAR, or better still, a way to use the web service of releases to get a MAR?

  Thank you

  You must download the files of MAR of the repertoire of the current version.
  The most recent release directory no longer exists as you have noticed.

  • http://download.CDN.Mozilla.NET/pub/Firefox/releases/42.0/update/Win32/en-us/

  You can construct a URL like this with the current version and the version that you want to update.

  • -partial - & os = win & lang = en-US & force = 1 "rel = 'nofollow' > https://download.mozilla.org/?product=firefox-< new > - biased - < old > & os = win & lang = en-US & force = 1
  • https://download.Mozilla.org/?product=Firefox-42.0-partial-41.0.2 & OS = Win & lang = en-US & force = 1

  This will give you a MAR file if this partial update is available.

• The alert detector

  I searched my computer and can't find the file for the alert detector. I have remove in the parameters of confidentiality, but as soon as I log in it's back! makes me crazy. It does not show in my firewall at all. What now?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Location of the computer has changed with the HDD Upgrade

  I live just outside OR Belfast. I just upgraded my HARD for one SSD drive. My computer is an iMac late 2009.

  I had a lot of alerts on my iPhone while allowing this new record, since it is considered as opening session on a new computer, which is perfectly fine. But authorities said that the location of my iMac is now in MANCHESTER, England (including the alert when I logged on my Apple account to ask this question)! Should I worry?

  I'm fighting to understand this. When I go in the Date and time preferences it gives my correct location. Local Apple authorized company to upgrade my HARD drive order in the SSD, probably from Manchester, is there something integral to the SSD which gives a Manchester location? If so, is it possible I can reset?

  Thank you

  Location Services uses the location of the router is using your Mac. The Mac itself has no possibility to determine its location. Extract from on location Services in OS X and Safari - Apple Support:

  Your approximate location is determined using information from local Wi - Fi networks...

  The iMac may contains a location cached to a bygone era - that of FSAA install the SSD. Time zone of your Mac (in system preferences > Date & time > time zone) is based on the extensive location of the IP address of your router and can simply choose the closest major city.

  If so, is it possible I can reset?

  Perhaps. Open system preferences > privacy and security > protection of personal information. Authenticate, then deselect Enable the location Services. Select again.

  If this does not work, try cycling the power on your router.

  If it still does not work, give it a day or more resets automatically.