Location information of photos

Similar Questions

• Paste the location of a photo to others in the Photos app?

  How can I paste the location of a photo to other photos (this was easy in iPhoto)?

  I'll often take a picture with my iPhone to get the precise location, and then paste this place to all the photos I took with my digital SLR.

  You can type the latitude, followed by the longitude in the location field of the Info for a photo Panel in Photos. Only, pictures don't show the location as latitude and longitude.

  You can see the latitude and longitude of a photo, if you export pictures then select in Finder and enter ⌘I for ' file > read the information.  The infopanel in the Finder will show the latitude and longitude.  Or use this script to copy the latitude and longitude in the jury of the dough: Script: extract numeric values using an Apple Script GPS

  Photos only, requires the coordinates to write with a decimal comma, not a comma, you may need to change the values returned, if your system preferences are set to write decimal numbers with a comma.

  And delete the part of the altitude of returned values.

• How can I copy a location of a photo and paste it in another? iPhoto can do this, but I can't find a way with Photos.

  How can I copy a location of a photo and paste it in another? iPhoto can do this, but I can't find a way with Photos.

  Accessible location via Get Info (command-I) information.

• How to copy the meta data of location of one photo to others

  In iPhoto used to be possible to copy location of metadata from one photo to others by selecting a photo and the "paste special" in photos of the selected target information. To my disappointment, I discovered Apple either has hidden this option very well or he just disappeared. I hope for the first, but I fear that this very handy as feature was just emptied into the sewers

  So my question boils down to: how to copy a location in 1 photo to other metadata?

  OSX10.11.1, pictures 1.2

  You cannot copy the location directly by copy and paste data.

  You can type in the latitude and longitude in the "Attribution of location."  To be able to do this export the photo you want to copy the latitude and longitude of and open the Info Panel in the Finder by clicking the photo and urgent ⌘I.  The "more information" section of the Panel Info will show you latitude and longitude.   Type the value in the field of the photo you want to copy you latitude North and longititude to.  Use decimal degrees, with a decimal point.

  

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN

• VISA: Insufficient location information (Hex 0xBFFF0011)

  Hello

  I'm trying to connect my power meter Ophir Vega to Labview. I have 8.1 of windows OS, labview 2013 32bits and VISA 5.4.1.
  However, when I try to initialize the instrument, I get an error "VISA: (Hex 0xBFFF0011) insufficient location information...". ». I can see the device in measurement and Automation Explorer.

  Everything works fine with the same electricity meter on Labview 8.2 and VISA 5.2 on windows XP 32-bit machine.  I tried to disable application signature of driver of windows on windows 8.1 - no luck. Any suggestions? I'm now download an older version of VISA.

  PS Sorry for the bold text, I don't know why I can't change it.

  I managed to do work, just need to change the ' Fract/exp chain to value' 'use point decimal system' false.

  Thanks for the help and goodwill.

• VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.

  See the other post on this subject, but my situation appeared a bit different (http://forums.ni.com/t5/LabVIEW/VISA-Hex-0xBFFF0011-Insufficient-location-information-or-the/td-p/69...

  My device manager says that the device is functioning correctly, MAX also tells me that the device is working properly, but I still get this error when I try to open a panel of test VISA in MAX or log VISA in labview.  When I click on validate in MAX under port settings that she even says that he opened a successful session of VISA.  But it does not connect in the Panel test VISA or in labview.  See the screenshots below.

  No device manager said that all was well with COM1, see the pictures attached.  I was able to get this working to uninstall the device and the removal of all the drivers and reinstalling.  Don't know what the problem was, but from the entire apparatus of zero was able to fix it.

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  Hello

  If you expand the keywords, this could give you a little more in detail.  You can click on the username of the photographer to see their portfolio and you can search within their portfolio.

  Thank you

  Bev

  

• There is in the information file photo, description, and keywords. If I want to add the name of the image in 17 languages which box is best for Google SEO?

  Photoshop - SEO Google. There is in the information file photo, description, and keywords. If I want to add the name of the image in 17 languages which box is best for Google SEO?

  As far as I KNOW, web browsers do not read image metadata.

  You should use the alt attribute for this sort of thing, or you might have a legend hidden with 17 languages, if you do not want to display on the web page.

• the application cannot be launched because it lacks the location information

  Hi all

  I'm bringing it back in action a Tungsten T that I've not used one year.  I want to install Filemaker Mobile 8 on the device.  I use Mobile in Filemaker 8 on my Treo 650 with success.

  The issue I'm facing is as indicated in the subject of my post:

  "the application cannot be launched because it lack of location information" is the message I get after selecting Filemaker Mobile on my Tungsten T.

  In order to solve the problem, I looked at length the web including this forum.

  The post with the most relevance were found on this forum so that I am registered in order to post on this site for the first time:

  http://forums.Palm.com/Palm/board/message?board.ID=macintosh_hotsync&thread.ID=1005

  Page 3 of this post, there is a solution extremely well explained.

  To you, my questions are the following:

  1. in your expert opinion is only applicable to my situation (xp pro) post even if the solution of this post was in a Mac environment?

  are 2 - there any other avenue better/more simple/different to solve my problem?

  Just to let know your with my process so to solve this problem on mine:

  A I reloaded the Tungsten T and synced with 5.4.5 on two different PCs that I use for my 650.  The two worked sync is installed but I still got the abobe mentionned message when I was trying to launch Mobile 8 on the T.

  B I decided to hard reset the unit (following the post mentioned above on this forum) and synchronized again but this time on a third xp pro pc that has been wiped with zeros (hderase) with a brand new xp pro a few weeks to install.  I then installed on this pc "fresh" 4.1.4 palm because this OS is the one recommended by Palm for a T.  I have synced (everything went well), installed Mobile 8 on this pc (as recommended by Filemaker), did a quick install of Filemaker on Palm desktop, synchronized again.  FileMaker installed and I have not received any synchronization error.  When I tried to launch Mobile on my T, I got the above message again "...". missing location information"on the screen of the T.

  So you help understand me this so that I can use this Tungsten T once again?

  Thanks in advance for your prompt cooperation on this issue, I want this funtionnal device as soon as POSSIBLE.

  See you soon

  You can try the steps suggested in the link you posted earlier and see if it can resolve the error. They were for another program and on the MAC, but it can be useful.

  Put the Filemaker .prc file in quick setup to synchronize with the T?

  I looked at the article referenced in the previous post, here is the article.

  http://KB.Palm.com/SRVS/Nua/launchKB.asp?c=20404

  Message relates to: Palm i705

• export of IPTC location information

  When I export a collection of images in Lightroom keywords and description so that copyright etc all come just with them.  IPTC location information does not (despite checking 'all' in the window export) how can I get the tags of country, State, city, secondary, I added the files to export?

  Why NOTHING does the IPTC extension Panel?

  LR metadata fields > IPTC Extension Panel fill in the fields that appear under the panels Extension IPTC Photoshop and bridge.   Although they have in common some labels, the Extension and Core fields are actually completely separate groups of fields.

  How do you get the fields to fill in the main draw instead?

  I can't help on that.  I think that you can customize in Photoshop and Bridge metadata panels (for example, see this thread), but it seems pretty involved and only partially documented.

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I later change or add a location to my Photos?

  Hello

  now I use iOS 10 for a few months (also as a beta-tester), but I tried... I can not change or add a place/location.

  Oh my 10 iOS... your new App Photo is really complicated.

  Also I would like to change or to change or do something with the faces that you acknowledged you will recognize the faces of foreigners (that is not a big problem), but you put the faces of strangers in the files of my friends and I can't do anything against it.

  The face recognition is not editable or better to say I have not found anything yet.

  So my big question: How can I set/add/edit the settings for the parameter of premises/location and face?

  I would like to use Photos in its full extent

  Thank you

  regarts kind,

  Daniel

  PS: I need to apologize for my English, I'm not a native speaker.

  10 IOS is only released for a few weeks and is only for mobile devices - do you mean OS X for Mac may be? If so we can't answer until you give us the exact version - the currnet software is OS X Sierra 10.12.  If you are up-to-date, then you select a picture in Photos and get info (right click then get info) and enter the location in the location field - what is described in help Photos too

  LN

• How do you add the location of many photos at once?

  How can I add the location (even) of many photos at the same time?

  For example, a visit to an amusement park where you took 100 pictures.

  My camera does not have a GPS feature, so how can I add this location even

  to all the photos without having to individually?

  Using the old iPhoto it wasn't hard, but I can't do it in Photo/El Capitan.

  Thanks for your help!

  Select all photos (Command is the keyboard shortcut), then click on the button top right of the photo window and click on assign a location, and then type the location in