Location of shortcuts scan in Win 7 Pro.

Where are the scan shortcuts stored in Windows 7 Pro that I created in the HP Solutions Center for my OfficeJet 5610 AIO?  I would like to recover my support to add to my new installation.

After hours of searching for some references to my scan shortcuts I find an .xml file with all the data of shortcut for my OfficeJet 5610 AIO.  The location is: c:\users\don\appdata\local\hp\digital imaging\oj5600.xml (use your username instead of gift).

As far as I'm concerned at this point, case closed.

Tags: HP Printers

Similar Questions

  • new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

    There are now 4 computers in front of me.

    Two are laptops 17 inch hp (consumer)

    Two are workstations mobile hp 17 inch (company)

    On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

    On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

    I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

    These are the pop ups that appear for each when displaying of readers by opening my computer:

    When left click hard disk drive a pop up appears with the title bar: location is not available.

    H:\ is not accessible.

    Access is denied.

    Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

    The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

    By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

    I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

    I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

    Then I went to the flash drive.

    Left click on the flash drive produces a pop-up with title bar G:\

    You don't have permission to access this folder.

    Click on continue to get permanent access to this folder.

    After clicking on continue it opens another pop-up with title bar G:\

    You have been denied permission to access this folder.

    To access this folder, you will need to use the Security tab.

    When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

    The tabs are general, tools, hardware, sharing, ReadyBoost, customize

    He did not indicate what to do next.

    Summary:

    Two new computers hp zbook stations mobile work with win 7 pro

    Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

    The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

    How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

    I have so far done the following:

    (1) run administrative guest with sfc/scannow and it found no violations of integrity

    (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

    (3) contacted HP support

    (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

    (5) updated drivers using HP support assistant on each computer

    (6) windows update the device HP support assistant on each computer

    How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

    How can I access my files on the external hard disk and flash the mobile workstation book z?

    The specifications for the mobile workstation of zbook are:

    Operating system: Windows 7 Professional 64-bit Service Pack 1

    Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

    Moemory system: 16 GB of memory on 2 1600 MHz dimm

    Graphics device 1: Nvidia Quadro K3100M

    Graphics device 2: Intel HD 4600 graphics card

    Hard drive 1: SCSI Disk Device

    C: 683.42 (613,62 free go-go)

    D: 12.21 GB (1,3 GB free)

    E: 1.99 GB (1.97 GB free)

    The hard drive is a seagate 1 TB drive that works very well

    The flash drive is a 1 GB drive which works very well

    This problem has been resolved.

    Right-click all methods have not access external external hard drives and flash drives.

    Sharing, permissions, ownership, administrative changes, all method all failed.

    This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

    The problem has been resolved by:

    (1) determine that he was not a NTFS problem

    (2) using the msconfig to isolate a single service

    When the unique service has been disabled the files on any external drives have been available.

    The service of the problem was the HP Client Security.

    This HP Client Security in its default value is set to deny access.

    Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

    When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

    I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

  • Just upgraded to Win 7 Pro to XP Pro - could not find a way to create shortcuts!

    OK, just for the record, I'm on Windows 7 Pro, just upgraded to Win XP Pro, a MacBook Pro using Parallels 8. So far, I love Windows 7, a cleaner and sharper than XP interface. But since I don't have installed it for a few days, I run into some nagging problems. As...

    ... OK, I agree with Office 365 and have all the programs under "other programs > Office 2013." For the life of me I can't understand how to create shortcuts to office programs.

    Can anyone help?

    Thank you

    Clinton

    Make a right click the program under Office 2013 list and go to send to-> Desktop (create shortcut)

    Do this with all programs.
  • with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

    with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

    Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Hello

    Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

    Thank you

    http://support.Microsoft.com/common/international.aspx

  • Is there a program to locate and replace the missing files in Win XP Pro 64 and the dll?

    I am running Win XP Pro 64 SP 2, on xfx 680i LT MoBo, Intel Duo Core 3 GHz. My computer is seen adapts to any time and stutters a lot, and sometimes I confuse it so it sits and wonders every day. When I see autorun (Sys Internals) I find several file not found entries. The same thing happens with Malware Bytes and HiJack This. Is there a program that will search for files or corrupt links and repair; missing it works? Thank you all. Merry Christmas.

    Thank you all for your responses pending. I want to especially thank Jose Ibara for in-depth answers. He is now coming along and no new response is necessary (I hope, or this thing dies!). Once again thank you.

  • After the passage of Win 7 Home to Win 7 Pro, I can't have Quickbooks Simple to turn on

    I can not get Quickbooks simple to turn on. In addition Ms Spider Solitaire will not work. QuickBooks just say he has encountered a problem and had to su = hut down. Solitaire says "unable to create DirectX device.

    Original title: After Win 7 Home to Win 7 Pro

    Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

    Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

    Is it a problem with shortcuts, have you tried to locate the actual .exe and clicking on those?

    You may need to uncheck 'Hide known file types' in Control Panel / folder Options / view to see file extensions.

    What happens if you test with another Windows user?

    Have you tried to reinstall the programs that are at fault?

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  • K3X66ES G3 255 HP #ABD: HP 255 G3 Hotkey Utility Win 7 Pro

    Hi all

    could you please tell me where to find a dirver/utility to get the shortcut keys (and fn Key) working with Win 7 Pro 64 Bit?

    Thank you very much!

    Best regards

    Daniel

    Just found the solution by myself. It is perhaps useful to other institutions. I disabled the 'Key Action' Mode in the BIOS "System Configuration" Option Now it's working.

  • new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

    Two hp 17-inch workstations mobile (business) Z book 17

    On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

    On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

    I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

    These are the pop ups that appear for each when displaying of readers by opening my computer:

    When left click hard disk drive a pop up appears with the title bar: location is not available.

    H:\ is not accessible.

    Access is denied.

    Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

    The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

    By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

    I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

    I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

    Then I went to the flash drive.

    Left click on the flash drive produces a pop-up with title bar G:\

    You don't have permission to access this folder.

    Click on continue to get permanent access to this folder.

    After clicking on continue it opens another pop-up with title bar G:\

    You have been denied permission to access this folder.

    To access this folder, you will need to use the Security tab.

    When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

    The tabs are general, tools, hardware, sharing, ReadyBoost, customize

    He did not indicate what to do next.

    Summary:

    Two new computers hp zbook stations mobile work with win 7 pro

    Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

    The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

    How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

    I have so far done the following:

    (1) run administrative guest with sfc/scannow and it found no violations of integrity

    (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

    (3) contacted HP support

    (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

    (5) updated drivers using HP support assistant on each computer

    (6) windows update the device HP support assistant on each computer

    How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

    How can I access my files on the external hard disk and flash the mobile workstation book z?

    The specifications for the mobile workstation of zbook are:

    Operating system: Windows 7 Professional 64-bit Service Pack 1

    Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

    Moemory system: 16 GB of memory on 2 1600 MHz dimm

    Graphics device 1: Nvidia Quadro K3100M

    Graphics device 2: Intel HD 4600 graphics card

    Hard drive 1: SCSI Disk Device

    C: 683.42 (613,62 free go-go)

    D: 12.21 GB (1,3 GB free)

    E: 1.99 GB (1.97 GB free)

    The hard drive is a seagate 1 TB drive that works very well

    The flash drive is a 1 GB drive which works very well

    Here is the new mobile workstations HP Z book 17.

    Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

    HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

    These two mobile workstations have problems of USB port with all the ports on each computer?

    These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

    What does do to be able to back up files on a disk external hard drive internal?

    Have to do to be able to use flash dirves with a 17 mobile workstation z book?

    This problem has been resolved.

    The book of Z 17 HP installed their software: HP Client Security.

    This software prevents the use of external hard drives and flash drives in its default settings.

    Each customer is on their own in discoverinv and the resolution of this problem.

    There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

    The way in which this issue has been resolved was by a clean boot process in msconfig.

    When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

    Whenever the hard drive or flash drive has been verified.

    We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

    This consumes a lot of time and was so frustrating.

    On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

    HP did wrong by not providing any information on the inside of this product the HP support assistant.

    Here's a consumer might encounter problems:

    The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

    After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

    It is the customer of HP security information:

    http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

    There was no information to reconfigure the software in the white paper.

    I was able to find a user guide.

    This guide was not and was not available through the HP support assistant:

    http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

    Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

    The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

    So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

  • EliteBook 2570p: EliteBook 2570p reinstall Win 7 Pro OEM

    Hi all.

    I replaced the HARD drive on my Elitebook2570p for SSD and I need to reinstall Win 7 Pro OEM to enable using my travel sticker located under the battery.

    I saw in aid of MS that we should reach to the local HP service center to do this, can cause seller issued series of Win does not allow with MS Genuine audit.

    However, the service representative Local HP told me that they cannot ask for Win 7 Installer CD to professional laptops and I must ask HP support directly.

    Could someone in HP give me a hint what to do in this case?

    If I understand correctly, OEM Win key is locked down for my motherboard, and unless I replace, I can't reinstall and activate the OS without any problem.

    Thank you.

    @dgurianov

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  • Win XP pro. SP3. Update does not start.

    I got my newly installed Win XP PRO SP3.
    And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc.
    If someone now what to do please help, need it for work.
    
    I got my newly installed Win XP PRO SP3.
    And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc.
    If someone now what to do please help, need it for work.
    

    Hello

    Follow these steps.

    Go to Start, run, copy and paste this command, then click OK: services.msc
    (Press the Windows key + R if you do not "run" in the start menu)

    In the list of Services, see Background Intelligent Transfer Service or BITS ?

    If it is not listed, please follow these steps if you have a desktop computer. If you have a laptop, go to section 2

    Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

    Research should show this file in the following locations:

    C:\Windows\System32
    C:\WINDOWS\ServicePackFiles\i386
    C:\WINDOWS\system32\bits

    I hope they are all present, follow these steps to register the service.

    Go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK

    Do the same with this file: regsvr32 qmgrprxy.dll

    Restart the PC and then copy / paste this command into the field run:
    %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

    If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

    The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

    Restart the PC and then go to the Services and you should be able to see BITS in the list.

    Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

    If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
    Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

    Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
    Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

    Reboot once more and then do the following.

    Go to this link and install the IE8 December Update:
    http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

    If you use IE7, use this link instead:
    http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

    Finally, go to the Windows Update site and you should be able to download normally.

    ==========================
    ARTICLE 2 FOR LAPTOPS ONLY
    ==========================
    If qmgr.dll is only present in C:\WINDOWS\system32, follow these steps.

    Open the system32 folder, locate qmgr.dll, then right-click and choose copy.

    Stay in the system32 folder and right-click anywhere and click on New, then folder. Rename the new folder into pieces (in lowercase).

    Open the folder of bits that you just created, right-click in the right pane and choose Paste. You should see the qmgr.dll file in there.

    Close Windows Explorer and then go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK

    Do the same with this file: regsvr32 qmgrprxy.dll

    Reboot the system and then copy / paste this command into the field run:
    %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

    If you are prompted to insert the Windows installation CD, ignore this and in the lower dialog box, change the path to C:\WINDOWS\system32

    Restart the PC and then go to the Services and you should be able to see BITS in the list.

    Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

    If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
    Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

    Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
    Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

    Reboot once more and then do the following.

    Go to this link and install the IE8 December Update:
    http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

    If you use IE7, use this link instead:
    http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

    Finally, go to the Windows Update site and you should be able to download normally.

  • I lost the installation product key that was sent to me on purchase of Win XP Pro SP2. How can I get it again?

    I bought a genuine Win XP Pro SP2, which was delivered to me empty Singapore invoice 1903187 dated 27/03/2009.

    For some reason any I had to format my PC, and now I need to reinstall Win XP.

    However, I lost my product key.

    Please help me to get the key.

    It can be sent to me on my email * address email is removed from the privacy * or * address email is removed from the privacy *

    Kind regards

    Sachin Betty

    C/o.Mrs M P Rane

    302, Vikram apartments,

    Navghar Road,

    Mulund East,

    Mumbai, Maharashtra

    India - 400081

    pH - + 91 9920 598 596

    Hello

    If your Windows product key is not valid, if you don't have a Windows product key, or if you have lost the product key that came with Windows, you will need to buy a new one to activate Windows.

    See the link below:

    http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-7-product-key

    (Applicable for Windows XP)

    How to identify, locate, and replace a product key: http://support.microsoft.com/kb/811224

    Hope this information is useful.

  • Win XP Pro SP3 loses settngs config on reboot.

    Win XP Pro SP3. To restart the machine, he loses the settings for programs such as: passwords, access programs, the mouse settings, registry numbers entered in the address book. Tried to 'Fix' the original CD; but he always loses these settings when the computer is restarted. Suggestions and solutions will be greatly appreciated

    Sadnewbie

    Hello

    1. did you further modifications of software on the computer recently?

    Method 1.
    Let us firstly the sfc scan and check if there is any missing system file.
    Reference:
    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Method 2.
    If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
    How to create and configure user accounts in Windows XP
    http://support.Microsoft.com/kb/279783

    How to copy data from a corrupted to a new profile in Windows XP user profile
    http://support.Microsoft.com/kb/811151

    How to recover damaged Windows XP user profile
    http://support.Microsoft.com/kb/555473

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I get the keys to recharge my upgrade from Vista to Win 7 HOME, then to Win 7 Pro?

    I upgraded my laptop Dell from Vista to Win 7 Home using WUA, and then to Win 7 Pro.  The laptop is in the shop, after an automated Win update it would not turn stay in "Repair" mode  I took it for repair and the technician asked for the keys of the upgrade.  The information that I have are on the laptop broke.  I can't connect to my account.

    Can anyone help?

    Thank you

    Hi Clancy,

    You can get in touch with Microsoft Customer Service team to receive a product key. You may also provide information about your computer or product purchasing information when you talk to the customer service representative.

    For more information, you can consult the following articles:

    Contact Microsoft

    How to identify, locate, and replace a product key

    Get a new Windows product key

    Hope this information is useful.

  • Problems installing software JO 8600 pro hp as wireless on win 7 pro

    Computer no HP Officejet Pro 8600 Premium N911N, Win 7 Pro

    I installed the printer as wireless six months initially.  It worked without problem until a few weeks ago the scan function would no longer work.  The screen of the printer has an error message which I have omitted to write but as I recall it was a failure of communication and listed the possible reasons [3].  The print function worked fine.  Printing and scanning doctor froze after choosing to set the scan function.  I uninstalled the existing software to install the full features software, that I downloaded.  I was not able to reinstall the software from.  I chose the wireless connection and the software crashes when searching for devices, never find any yet the printer is connected to my network.  I repeated the process, more than a dozen times and times [2] the facility found the printer but has frozen shortly after that I chose and I continued.  I have to finish the program in the Task Manager.  I currently installed the device in USB and tried to convert wireless, still frozen.  Scan and Disk Doctor does not work because it says I don't have the full software installed.

    I'm sorry that the link does not work. I have re-posted here 'Windows 7: the Network Installation hangs on the control environment of the network screen'. Please let me know how the troubleshooting.

    Thank you.

  • How to download and use my Win 7 Pro prior in a Virtual Machine in VMWARE PLAYER?

    before 3 years, I bought a win 7 pro PC - recently, I fee install 8.1... How to download and use my prior Win 7 Pro in a Virtual Machine in VMWARE PLAYER?

    Unfortunately, you must have prepared a recovery disk in advance or use the one provided with your computer.

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

Maybe you are looking for