lock PC to login screen

When I connect, the computer hangs, the cursor is able to move but ctrl alt del does nothing until the pc to 'wake up '.

Thanks a lot for your help on this matter!

I did a clean boot and the problem occurs then returned to normal startup and the problem has not occurred since that time

I went online and did some research more far and I downloaded some freeware from microsoft that checked and "cleaned & repaired"... centre of fixit

so I hope that the problem has been resolved

Thanks again for your help on this issue, its so refreshing to have this help from you

Tags: Windows

Similar Questions

  • Computer keeps locking and go to the Login screen

    I am running Windows Home Premium Service Pack 2. My computer keeps locking and return to the login screen. I went on the screen savers and I'm not using a screen saver and so I have not activated in him back on, return to the login screen is not checked. I tried everything I know to do and I am now at a loss. It becomes very annoying. What I'm missing here? Thank you.

    Hello

    Check the settings in the Control Panel - Power Options - upper left "require a password on Wakeup"
    If new game that will put you in the opening session after a sleep screen.

    Check these institutions:

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps and happy holidays!

    Rob - bicycle - Mark Twain said it is good.

  • UAC prompted on the login screen

    Hi all

    I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.

    I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.

    Here's what I've tried so far:

    • Checked 'Find my Mac' is NOT enabled
    • Guest user account is set to 'Off' under users and groups
    • A ran a script that I found in an older post in the Terminal

    None of the things above removed the user invited to my login screen.

    It's all solid fix how to get rid of the guest user?

    Thank you!!

    You said "guest user account is set to off in users and groups.

    Do you mean that the guest user account is always accessible in the ordinary journal?

    Also-

    When you are in users and groups - you by clicking on the lock - and enter your password to make changes?

    If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box

  • Login screen - DNS issue

    We seem to be affected by intermittent empty login screen on my company's website, but only for the microsoft login page, the login page Skype charges well.

    Loading Skype upward, you get this screen:

    And users choose 'Microsoft account '. They should then see this screen:

    Instead they get this:

    Inside, there is a warning message stating the following:

    "This page contains errors. Go back'

    The site uses OpenDNS to filter queries DNS for computers and politics is quite locked.

    On any affected PC, if:

    -Close Skype

    -Run the DNS settings to something like 8.8.8.8 (google DNS server)

    -Load Skype

    The login screen (image 2) loads normally. The user can connect and I can then folding the DNS settings on the OpenDNS server and there is no other problem.

    Which means that Skype is trying to communicate with a Microsoft/Skype server somewhere on the interent and because it is not on my whitelist OpenDNS it gets blocked and it fails as in Fig. 3.

    My question can someone tell me what is the server? I went through the OpenDNS logs and the white list a bunch of stuff from microsoft and other things related to the certificates, but still no luck.

    Evetually I took the suggestion of Techfreak and sniffed packets with wireshark. Was annoyed to discover that the root cause of the problem is strangely named sb.symcd.com.

    Some quick Google-fu led me to a page that said that this area should be on a whitelist for Lync facilities. Hmm.

    Why microsoft couldn't use Server intuitive/descriptive names more is a mystery. In any case, I have whitelisted *. symcd.com and of the limited testing it seems to be resolved.

  • Access disabled root but 'other '.... "still appears on the login screen

    I went into Preferences > users and disabled root access, but after reboot, 'other... '. "still shows up on my logon screen.   If Root access is disabled, why 'other... '. "still the poster on the logon screen?   I would get to only show my user login on the login screen only.

    If it is greyed out... It is the way that is supposed to be. I don't know any way to remove it. Unless unlock you the lock click on it and click on the negative area. Why would you want to get rid of it. If it is not gray. Click on the lock, click on the user and uncheck the allow to log on to this computer. You will need to enter your password each time that unlock you. This is done in system preferences.

  • Login screen loads, then more nothing (will not continue to Windows)

    I have a HP Pavillion laptop and just today I tried to turn it on and it gets to the login screen, I type my password and then... nothing.  He goes to a space where I can see the mouse, but there is nothing to click on the screen.  CTRL-Alt-Del brings up to the window manager of Out-Task-lock switch user-sign and I can use one of these, but that's all.  She will not continue by windows.  Any suggestions?  I've only had the laptop for three months.

    Hello

    Try to use the system restore Windows to return the machine to an earlier point in time when it worked correctly - a complete guide on how to make of this (including a video preview) can be found on the link under the subheading: restore your computer when Windows 8 cannot start normally (it's to halfway down the page).

    http://support.HP.com/us-en/document/c03327545

    Kind regards

    DP - K

  • Key combination to bring up the login screen?

    Hello.  I'm running Vista 64 bit and have a question. I configured my screensaver to require a sign-in and can't seem to adjust the ignition for 5 to 15 minutes, but this is an argument.  This means that I have to sign in after just sitting in my office do something else for a short period.  It would be nice to hit a few keys before leaving my cubicle to bring up the login screen immediately.  I can go to a sleep with a strike mode, which will require a sign-in on wakeup, but then e-mail continues to accumulate and some programs require guests to leave.  Anyone know a shortcut to the login screen?

    Try 'Windows key' + L
    or CTRL + ALT + DELETE, and then press ENTER to lock

    I hope this helps.

  • Windows Vista goes to sleep and then wakes up immediately at the login screen

    Original title: sleep function appears just right back to the login screen

    When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

    I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

    -HE'S

    When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

    I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

    -HE'S

    See if the following can help you...
    Start button > Panel > Classic view > Power Options > click on change power settings > click on advanced editing powersettings > scroll down until you see Miltimedia parameters, click the plus sign (+) sign in front of > again once, click the (+) sign sign in front when media sharing > on battery shoud read " allow the computer to sleep ".
                                                     Sector should read " allow the computer to sleep ".
    If they aren't, it must 'prevent the idling to sleep' or 'allow the computer switch to Away mode. Click on it, you should see a pointer on the far right, click on it and select allow the computer to sleep.
    Click OK when finished.

    t-4-2

  • Double configuration monitor - only a monitor displays the login screen 2nd monitor is black

    Hello, I searched Hi and low and starts to believe that it is just not possible from messages of others.  But since the last time this question has been posted in 2011, I'm hoping that there was a resolution.

    How can I get my secondary monitor to show an image (any image would be great), while my computer is locked or simply putting in operation and reached the login screen.  Currently my secondary monitor shows just a black screen.  I do not want my screen to extend completely on two monitors (mosaic on nvidia video card) because when I do, my taskbar spans also the length of the two screens.  I like to use click once on my programs, rather than cluttering up my desktop with icons and you install vertically between the two monitors. I am unable to do otherwise.  Please let me know if anyone knows how to do this.  Thank you

    Hello

    Please contact Microsoft Community.

    I suggest you follow the steps mentioned and see if it helps:

    Method 1:

    Duplicate the display settings and check if you can view the screen saver in the monitor extended as well.

    To change your display settings

    1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

    2. click on the dropdown next to several screens, click on duplicate these appear, and then click OK.

    The option appears only when Windows detects multiple displays, more than one monitor connected to your PC.

    Note:

    o If you don't see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

    o ensure that the monitor you want to extend your desktop to is turned on and plugged into the video port appropriate to your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

    For more information, see the following link:

    Move windows between multiple monitors

    http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

    Method 2:

    I suggest you to check the display resolution value for both monitors. Make sure that the resolution of the screen is the same on each display.

    For more information, see: get the best display on your monitor

    http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

    I hope this helps. Let us know the result.

  • Keyboard & mouse not working not not at the login screen.

    I have Windows7 64 bit installed on my machine. I can't use my keyboard and USB mouse to the login screen. I tried to boot the system in safe mode, but I am facing the same problem here. When the login screen if poster my keyboard freezes and if I press num lock does nothing. My mouse stops on the login screen. I don't want to reinstall windows as it will scan all the settings I have on my machine. Is it possible to solve the problem without having to re - install windows. I tried to fix the problem using my installation disc, but I couldn't find the solution.

    Hi Philippe,.

    I suggest you to disable and re-enable the USB controller and check if it helps.

    Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.
     
    To disable and re-enable the USB controllers, follow these steps:
    a. Click Start, type Manager of devices in the search box of start and press ENTER.
    b. expand Bus USB controllers.
    Note that you have to scroll down to find this point.
    c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
    d. Repeat steps above for each controller USB is listed under Bus USB controllers.
    e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
    f. check the USB device to see if it works.
     
    Also, try updating the chipset drivers on the computer manufacturer site.
     
    Thank you.
  • Login screen hangs

    Hello.  Since I upgraded to macOS Sierra, my early 2015 MacBook Pro freezes on the login screen.  I tried clean install, reinstall, SMC reset, reset the NVRAM.  Nothing seems to help.  I can finally drag the cursor to the button stop, but it takes a while.  Once it starts up again it is fine... until I have restart or stop again.  Any thoughts?  Thank you.

    Try to start in safe mode (hold down the key of the SIFT when starting) once or twice. The login screen freezes?

  • Login screen of change in the Sierra

    I wish to have an image that is displayed when the connection. How can I do that. Photo of connection used to be located in the Caches folder but no more.

    Please do not suggest changing the wallpaper in the system preferences is not what I am referring is login screen image that I would like to replace.

    Any help appreciated.

    My image of login is in the folder Macintosh HD/Library/Caches, as it has always been.

    Check again.

  • BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

    After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

    Hey hernj103,

    Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

    Use Time Machine to back up or restore your Mac

    Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

    Try safe mode if your Mac does not end commissioning

    If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

    See you soon.

  • Black login screen

    When starting, a black login screen prevents my screen 4 K of login in. Computer must be stopped with force and restarted. Memory NVRAM/PRAM resetting has not helped.

    It seems that it is a problem with the mac and display negotiate the appropriate resolution.

    You can use the mac at all? After the reboot, does it work?

    It works with a different view?

    You can try to connect "blind"? It is possible that after a disconnection of the display and the figure of mac it. (Weird, I know; but it is not really difficult to connect even without the screen, if you know what position in the list, your account is just press the left or right arrow keys, enter, password, enter).

    Maybe better, if you have access to another mac, use the screen sharing feature to connect; then go to system-> Display Preferences and try to choose a frame that works.

  • Message starts with the iMessage login screen

    Mac OS X Sierra Message app starts with an iMessage login screen, however; When I get my good Apple ID and password, nothing happens.  When I enter incorrect information, it appears with a red warning text indicating that Apple & /or password ID are incorrect.

    How to past the login screen?  My information is correct, but the program will not always be in front of the login screen

    Hello

    He was working before you upgrade to the Sierra?

    No chance that your logic/mother Board has been replaced?

    This keeps the serial number of the Mac and is used to provide a specific connection of the device.

    Go to the Menu icon Apple and select about this Mac.

    Tab preview is to display the serial number.  (if this is not you must go to an Apple Store or the repairer so it will be again).

    Go to the menu icon Apple once again, but hold down the ALT key and select System Info.

    Open Hardware > network > locations

    The list on the right list en0 for one of your connections?

    On the old Mac en0 was Ethernet and Wi - Fi and Thunderbolt on newer Gets the following figures.

    There are some Mac without Ethernet en0 so can Wifi

    You can also look in Applications/Utilities and open the network utility and use the Info tab and fall down.

    Is missing the en0 then you need to remove some system side .plists and restart the Mac.

    I saw some information to remove all these

    Note the path bar across the bottom.

    Simply remove the Airport (WiFi), one maybe.

    If they did not work, then after that the appeal of Apple process is lengthy to explain.

    (you can get blocked by devices and this requires the server reset on your Apple ID on a single device)

    21:42 Thursday; September 22, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

Maybe you are looking for

  • Qosmio F20 - 153 - stuck on the log in page

    Hello I have a Qosmio F20 - 153 and when I boot up I get beyond the log in page. It won't let me choose my username so I'm just stuck on this screen. I think I need to perform a recovery CD system but I don't have the CD. Is it possible to download t

  • PCI simple communications controller driver hp dc5800

    error message: PCi simple communication controller The drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. found the answer: You need to install the HECI of 32-bit driver that

  • Utube NEVER straight crossbar... always stops 50 X... very frustrating. All the answers?

    It is impossible to watch any video on utube without going through the video stop every 3 seconds or more. I understand that little turns every time, then it starts for a few seconds and stops again. I usually do not consider and close the window. Wh

  • Need product key 25 character for the Dungeon Siege game

    I bought Dungeon Siege about 6 years ago. Since then, I've lost the case and all the Info for the loading of the game. I bought a new computer recently and when I try to load my game it asks a 25-character product number. Anyone know where I can get

  • Sansa fuze is not detected on Sansa Media Converter

    I used the converter of media before and it worked fine.  Yesterday, he said that there was no legacy avalible.  I reconnected it in several times.  I've changed modes.  Nothing has worked.  It is detected on the computer, but not the sansa Media Con