Lock screen resolution does not display the correct image size
original title: lock the resolution of the screen and graphics
It's not just me, but I have problems with my lock screen. Any image I use the image is the right size and color aren't (almost like a filter of Sarcelles is imposed).
My native screen resolution is 5760 x 1080. I tried for some screen resolutions, both the original and the current. Even the original will not display correctly.
Ideas?
Well, well, well. After you disable the lock for a while screen, today I decided to re-activated it. I love nail polish it gives for WIn8 only that my plan was to use a solid color.
Imagine my surprise when applied wallpaper appears with the correct aspect ratio.
Even more surprised that it allows me to use ANY wallpaper now and they look all perfect; 16:9, ultra wide-angle (surround), it does not matter. Everyone is properly rendered to the screen.
If anyone from MS is reading this, thank you. I know how Visual, aesthetic items will fall to the bottom of the to do list due to the perception of someone, they are trivial and not important.
You took the time actually solve this little problem. I am amazed, that perhaps MS really takes a step to circulate better over time. Really looking forward to what is to come!
Happy 4th of July!
Tags: Windows
Similar Questions
-
How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED
Hi jodepepevalentin,
In the print menu, check "scale to fit media" under the Position and size of the device and then check out.
If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.
Kind regards
Claes
-
Windows xp monitor does not display the background image
My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side.
Other images, all jpg files, are the same.
Hi edwardo418,
Check that your post office is set to stretch. Perform the following steps.
- Right-click on an empty space on the desktop.
- Select Properties.
- Select the Desktop tab
- Change the setting to Stretch under Position
- Click on apply
- Click OK
Let us know if that helps.
-
During the insert, the program monitor does not display the adjacent images
On page 207 of the manual, it says:
The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images
in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.
When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?
This works when you drag the movie, not the program monitor.
-
crsctl does not display the correct information
Here is what happened.
There is a test at home for learning system. Oracle RAC 11.2
It was working fine.
I had a group of data called ASM DATA
I added a new data group to asm called DATA1 and then I dropped the DATA1
Now, when I restart the machine... the database does not start automatically... when I go to sqlplus and use the order... starting the database starts
However after starting, if I use the command
crsctl res stat - you
I expect to see the State of the ora.rac.db online
I see the State of the ora.rac.db offline
I heard that after the removal of a group of data we do maintenance using SRVCTL command
I checked on Metalink, but was unable to find any document.
Please help.
Here's what I did to solve the problem
. / stat crsctl res ora.rac.db Pei | grep DEPENDS
START_DEPENDENCIES = hard (ora. DATA.dg, ora. Weak(type:ora.listener.type,global:type:ora.scan_listener.type,uniform:ora.ons,uniform:ora.eons) of Data1.DG)
pullup (ora. DATA.dg)
Hard = STOP_DEPENDENCIES (intermediate:ora.asm, stop: ora.) DATA.dg, shutdown:ora. Data1.DG)
The above was incorrect because the disk DATA1 group fell however crsctl registry was not updated.
I tried the below command but it didn't work
. / crsctl change res ora.rac.db - attr ' START_DEPENDENCIES =' hard (ora. " DATA.dg)
Weak(type:ora.listener.type,global:type:ora.scan_listener.type,Uniform:ora.ons,Uniform:ora.) Eons)
pullup (ora. DATA.dg) "" "
then I tried the command above with the indicator f and it worked
Now, I gave the next command
. / crsctl change res ora.rac.db - attr "STOP_DEPENDENCIES =" tough (intermediate:ora.asm, stop: ora.) "." DATA.dg)' '-f '.
then I stopped the cluster and rebooted the machine
but the database did not come to the top...
so I did a little research and gave to the next command
. / crsctl change the resource ora.rac.db - attr AUTO_START = always
... Stop cluster and restart
BinGO... the issue is now resolved
-
original title: Hard Drive rename BUG
I have a problem with the change of name of the hard disk.
Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.
I am running windows 7 Pro.
Someone please provide solution.
Thank you.
Hello
Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows
You can try these:
a. open the Start Menu.
(b) in the area of the white line (search), type regedit and press ENTER.
c. click on the button continue in the UAC prompt.
d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer
e. in the left pane, right-click on explorer.exe and click on New and key.
f. type DriveIcons and press ENTER.
g. in the left pane, click with the right button on DriveIcons and click on New and key.
h. type the drive letter (EX: E) you want to change the route name and press ENTER.
i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.
j. type DefaultLabel and press ENTER.
k. in the right pane, click with the right button on (default) and click on change.
To change the name of the reader - l.
i. enter a name (Ex: My DVD), and then click OK.
II. go to step n.
Mr.. to restore the default drive name-
i. leave it blank, and then click OK.
II. go to step n.
n. Repeat steps i to m if you want to add another drive letter icon to change.
o. close regedit.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
3D image control does not display the full image.
I'm having a problem with the control of 3D image not showing my entire 3D model.
At first, I thought it was 'FOG', but when I put the SceneObject Fog.Function to 'No. Fog' he has no effect.
I tried several settings, but I can't seem to find anything that affects what I'm looking for.
I included some photos to show what it is I'm looking for.
If I Zoom in control of the 3D image, I see more of the image in the background.
I don't know if this is a limitation of the 3D image control or a setting I can change.
It seems to be your plan of demarcation.
I forgot how to set it up, but there is a property somewhere node that defines a cup for youi view plan implemented. There might be a function of the camera, I'm not quite sure...
EDIT: Found, is as follows:
Note To prevent objects 3D appear deformed, avoid the scaling of items not in the plans of delimitation. Near demarcation plan, which defines the nearest plan of the Viewer, the default value is 0 units. The extreme demarcation plan, which defines the demarcation plan further from the Viewer, the default value is 10000 units. You can use the Projectionerspective method to set the values for the plans of delimitation by program
-
Does not display the correct line.
I use HP Pavilion dv7 and when I slide the volume with your finger using the touch buttons - on the screen shows a line this messure the volume. It has now disappeared. The volume is otherwise fine. I can't see the line.
I am sorry to say that I don't know the operating system of your system.
I have provided a link to download utility screen. Simply download and run the utility, and you should get the on-screen volume bar.
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-90653-1
Before downloading pls check the operating system is supported by your system or not. If so, then only, download and run the utility.
If the problem is not resolved, then run a system restore.
http://www.SevenForums.com/tutorials/700-system-restore.html
-
Weather gadget does not display the correct time
original title: WINDOWS 7 HOME PREMIUM, IE9 IMAP WEATHER DESKTOP GADGET
This gadget not only did not recognize established cities, but the climate is always a week behind, which gives suggestions out there in the strange world of the nothingness of the technology gone bonkers, invasive and just plan to update every 4 hours!
Hello
Please uninstall and reinstall the weather gadget and check.
Check out the links.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
http://Windows.Microsoft.com/en-us/Windows7/install-a-program
-
E-mail account does not display the correct account history
original title: I had my email.account for 3ys, and you say, I just started, where is my old account
they say that I just started my account, and I had my email for more than 3 years account, whats going on?
Hello
A second request for further information!
We need more information on your issue.What email program are you using?
What electronic access Internet/mail provider you are signed up to the?
Here is a link to generic installation for Outlook Express:
http://support.Microsoft.com/kb/2409264
B Eddie
-
devices and printers does not display the correct information of device or the icon
I click on devices and printers and of course my devices and printers all appear, however, the device appears to my computer shows in the information window which is a Tablet instead of a desktop PC, the model number is incorrect and also the icon as well. How can I fix this.
Same question here.
Solved with this microsoft hotfix to formIt turns into the right device and realistic icon -
Cataloge does not display the imported image
Computer store put in new hard drive and copied photos of old disk hard 'C' for the new drive hard 'C '. Old hard drive is still active on the computer but named 'G' now. Any time that I import images from the new 'C' drive they are absent in the catalog. I try to reconnect and message said they were not connected. What should I do?
Hmmm
The fact that you use Photoshop Elements is not mentioned in your original post and then your message has been moved on the Lightroom forum. You'd better ask a question in the forum of Photoshop Elements.
-
my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?
Hello
Follow the instructions here:
-
How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low
Hello
Try pressing the ENTER key on the keyboard instead.
See you soon.
-
I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.
I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.
Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.
My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.
Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.
Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.
Any help would be appreciated. Thank you.
You can try a different theme of Windows?
Have you tried to start the computer using Windows safe?
Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.
Maybe you are looking for
-
Where is the shield, I used to have in the address bar?
I don't see the small shield next to items in the address bar. Now all I have is a lock green or gray, which is not bad, but I want the other "indicator" armor of return. See the image attached to the shield of a Mozilla help page
-
RT - etspc - hard drive (size)
Hello I created my goal of RT on an old computer, which meets the requirements of the document http://zone.NI.com/DevZone/CDA/tut/p/ID/8239?OpenDocument and everything works fine with LabView RT 8.6. Now, I'm going to prepare a new goal of RT with La
-
I keep getting a prompt to install the automatic update, and whenever it will not install, I have included the error code and update of information. I tried to us Microsoft Fix It, but that did not work or another, can anyone help. Thank you
-
"Sansa Fuze v2 freezes on ' update your media.
I had this problem since I got it earlier this year. I tried to solve this problem in many ways. First I thought it was a problem to do with the tags which many of you have told me, but after having systematically organize every single audio track,
-
No sound on windows vista home
I get no sound after a period of inactivity or the awakening of my computer from a 'sleep'. Restart the computer, then the sound will return. The operating system is Windows Vista Home. Please advise me on this matter. Thank you.