Lock the AnyConnect VPN with broader access list

I'm trying to lock my AnyConnect VPN interface. I use the split tunneling. I want only to http tunnel traffic to an external http server we have and ftp to another external server behave. I don't want anything else through the tunnel or anywhere else allowed on our network. My current setup, I can connect to the vpn and the servers ping external ip address, but not by name. I can also not navigate anywhere else while I'm connected. It is not imperative for me to navigate anywhere else, when you are connected, but I need to allow only access specified above.

Configuration:

attributes Anyconnect-group policy

VPN-tunnel-Protocol svc webvpn

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list WebAccessVPN

WebVPN

list of URLS no

SVC request to enable default webvpn

WebAccessVPN list extended access allow icmp disable any newspaper host FTP - EXT object-group Ping_and_Trace

External FTP FTP access WebAccessVPN-list comment

WebAccessVPN list extended access permitted tcp disable no matter what newspaper to host FTP - EXT object-group DM_INLINE_TCP_2

WebAccessVPN list extended access allow icmp disable any newspaper host LICENSING-EXT object-group Ping_and_Trace

WebAccessVPN list extended access allowed object-group TCPUDP any LICENSING-EXT eq www log disable host

WebAccessVPN list extended access deny ip any object-group DM_INLINE_NETWORK_1

You can use the vpn filter under the attributes of political group. In the vpn-filter, you can reference the access list you created.

Tags: Cisco Security

Similar Questions

  • AnyConnect VPN users cannot access remote subnets?

    I googled this until blue in the face without result.  I don't understand why Cisco this so difficult?  When clients connect to the anyconnect vpn, they can access the local subnet, but cannot access the resources in remote offices.  What should I do to allow my anyconnect vpn clients access to my remote sites?

    Cisco 5510 8.4

    Hello

    What are remote sites using as Internet gateway? Their default route here leads to the ASA or have their own Internet gateway? If they use this ASA for their Internet connection while they should already have a default route that leads traffic to the VPN to the pool, even if they had no specific route for the VPN itself pool. If they use their own local Internet gateway and the default route is not directed to this ASA then you would naturally have a route on the remote site (and anything in between) indicating the remote site where to join the pool of 10.10.224.0/24 VPN network.

    In addition to routing, you must have configured for each remote site and the VPN pool NAT0

    Just a simple example of NAT0 configuration for 4 networks behind the ASA and simple VPN field might look like this

    object-group network to REMOTE SITES

    object-network 10.10.10.0 255.255.255.0

    object-network 10.10.20.0 255.255.255.0

    object-network 10.10.30.0 255.255.255.0

    object-network 10.10.40.0 255.255.255.0

    network of the VPN-POOL object

    10.10.224.0 subnet 255.255.255.0

    NAT static destination DISTANCE-SITES SITES source (indoor, outdoor) REMOTE static VPN-VPN-POOL

    The above of course assumes that the remote site are located behind the interface 'inside' (although some networks, MPLS) and naturally also the remote site networks are made for the sake of examples.

    Since you are using Full Tunnel VPN should be no problem to the user VPN transfer traffic to this ASA in question.

    My first things to check would be configuring NAT0 on the ASA and routing between remote sites and this ASA (regarding to reach the VPN pool, not the ASA network IP address)

    Are you sure that the configuration above is related to this? Its my understanding that AnyConnect uses only IKEv2 and the foregoing is strictly defined for IKEv1?

    -Jouni

  • AnyConnect VPN and LAN access

    When remote users to connect to the Cisco ASA VPN and authenticate with Cisco AnyConnect client, they then full access to the environment internal of LAN of business as if they were sitting at their desks in the Office of the Corporation.

    Right?

    After that the remote client authenticates to the AnyConnect VPN, it is sensible to then run remote users of traffic through the corporate firewall (outside to inside) before allowing LAN access full corporate?

    Remote_User - vpn - ANYCONNECT-(outside) (inside) firewall - CORP_LAN

    Thank you

    Frank

    Hello

    Yes, by default, all traffic will be sent through the tunnel.

    If there are users VPN shouldn't be able to reach the resources, you need to establish rules for access to it. The best way to do this is by using VPN filter.

  • The anyconnect vpn easy vpn Remote communication problem

    Hi team,

    I have a problem of communication of the anyconnect vpn easy vpn Remote I´ll explain better below and see the attachment
    topology:

    (1) VPN Tunnel between branch HQ - That´s OK
    (2) VPN Tunnel between Client AnyConnect to HQ - that s OK

    The idea is that the Anyconnect Client is reaching the local Branch Office network, but has not reached.
    Communication is established just when I begin a session (icmp or rdp) branch to the AnyConnect Client,.
    in this way, the communication is OK, but just for a few minutes.

    Could you help me?
    Below the IOS version and configurations

    ASA5505 Version 8.4 (7) 23 (Headquarters)
    ASA5505 Version 7.0000 23 (branch)

    Configuration of the server easy VPN (HQ) *.

    Crypto dynamic-map DYNAMIC - map 5 set transform-set ESP-AES-256-SHA ikev1
    Crypto card outside-link-2_map 1 ipsec-isakmp DYNAMIC-map Dynamics
    Crypto map link-outside-2_map-65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    Crypto map interface outside-link-2_map outside-link-2

    ACL_EZVPN list standard access allowed 10.0.0.0 255.255.255.0
    ACL_EZVPN list standard access allowed 192.168.1.0 255.255.255.0
    ACL_EZVPN list standard access allowed 192.168.50.0 255.255.255.0
    ACL_EZVPN list standard access allowed 10.10.0.0 255.255.255.0

    internal EZVPN_GP group policy
    EZVPN_GP group policy attributes
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list ACL_EZVPN
    allow to NEM
    type tunnel-group EZVPN_TG remote access
    attributes global-tunnel-group EZVPN_TG
    Group Policy - by default-EZVPN_GP
    IPSec-attributes tunnel-group EZVPN_TG
    IKEv1 pre-shared-key *.

    object-group network Obj_VPN_anyconnect-local
    object-network 192.168.1.0 255.255.255.0
    object-network 192.168.15.0 255.255.255.0
    object-group network Obj-VPN-anyconnect-remote
    object-network 192.168.50.0 255.255.255.0
    the NAT_EZVPN_Source object-group network
    object-network 192.168.1.0 255.255.255.0
    object-network 10.10.0.0 255.255.255.0
    the NAT_EZVPN_Destination object-group network
    object-network 10.0.0.0 255.255.255.0
     
    destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.

    Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
    destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination static

    NAT_EZVPN_Destination no-proxy-arp-search to itinerary
    NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destination

    NAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route

    Configuration VPN AnyConnect (HQ) *.

    WebVPN
    Select the outside link 2
    by default-idle-timeout 60
    AnyConnect essentials
    AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
    AnyConnect profiles Remote_Connection_for_TS_Users disk0: / remote_connection_for_ts_users.xml
    AnyConnect enable
    tunnel-group-list activate

    tunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0
    tunnel of splitting allowed access list standard 192.168.15.0 255.255.255.0
    tunnel of splitting allowed access list standard 10.0.0.0 255.255.255.0

    internal clientgroup group policy
    attributes of the strategy of group clientgroup
    WINS server no
    value of server DNS 192.168.1.41
    client ssl-VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel
    ipconnection.com.br value by default-field
    WebVPN
    AnyConnect Dungeon-Installer installed
    time to generate a new key 30 AnyConnect ssl
    AnyConnect ssl generate a new method ssl key
    AnyConnect value Remote_Connection_for_TS_Users type user profiles
    AnyConnect ask flawless anyconnect

    type tunnel-group sslgroup remote access
    tunnel-group sslgroup General-attributes
    address vpnpool pool
    authentication-server-group DC03
    Group Policy - by default-clientgroup
    tunnel-group sslgroup webvpn-attributes
    enable IPConnection-vpn-anyconnect group-alias

    object-group network Obj_VPN_anyconnect-local
    object-network 192.168.1.0 255.255.255.0
    object-network 192.168.15.0 255.255.255.0
    object-group network Obj-VPN-anyconnect-remote
    object-network 192.168.50.0 255.255.255.0
    the NAT_EZVPN_Source object-group network
    object-network 192.168.1.0 255.255.255.0
    object-network 10.10.0.0 255.255.255.0
    the NAT_EZVPN_Destination object-group network
    object-network 10.0.0.0 255.255.255.0
     
    destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.

    Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
    destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination static

    NAT_EZVPN_Destination no-proxy-arp-search to itinerary
    NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destination

    NAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route

    Hello

    communication works when you send the traffic of easyvpn derivation because it froms the IPSEC SA to pool local subnet and anyconnect HQ. The SA formed only when the branch initiates the connection as it's dynamic peer connection to HQ ASA.

    When there no SA between branch and HQ for this traffic, HQ ASA has no idea on where to send the anyconnect to network traffic.

    I hope this explains the cause.

    Kind regards

    Averroès.

  • Cannot open the project file with write access.

    I saw that this problem has been reported before, but have yet to find a solution.

    I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

    "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

    I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

    FYI two computers use Windows 7.

    All solutions?

    Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

    Eric

    ADK

  • AnyConnect VPN is not access to the ASA

    Hello

    I have an ASA 5512 - x configured as a hub AnyConnect VPN, but when I connect I can not access the firewall... I can ping the address 10.4.11.2 but I can not connect... No idea what to do? It's the running configuration:

    : Saved

    :

    ASA 1.0000 Version 2

    !

    asa-oi hostname

    domain xx.xx.xx.xx

    activate 7Hb0WWuK1NRtRaEy encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    1.1.1.1 DefaultGW-outside name description default gateway outside

    name 10.4.11.1 description DefaultGW - Default Gateway inside Inside

    !

    interface GigabitEthernet0/0

    nameif inside

    security-level 100

    IP 10.4.11.2 255.255.255.0

    !

    interface GigabitEthernet0/5

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5.2000

    VLAN 2000

    nameif outside

    security-level 0

    IP 1.1.1.2 255.255.255.252

    !

    interface Management0/0

    Shutdown

    No nameif

    no level of security

    no ip address

    management only

    !

    boot system Disk0: / asa861-2-smp - k8.bin

    passive FTP mode

    clock timezone BRST-3

    clock summer-time recurring BRDT 2 Sun Oct 0:00 Sun Feb 3 0:00

    DNS lookup field inside

    DNS domain-lookup outside

    DNS server-group DefaultDNS

    1.1.1.1 server name

    1.1.1.2 server name

    domain xx.xx.xx.xx

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    network of the PoolAnyConnect object

    subnet 10.6.4.0 255.255.252.0

    access extensive list permits all ip a outside_in

    list of access by standard tunnel allowed 10.0.0.0 255.0.0.0

    pager lines 24

    Enable logging

    timestamp of the record

    exploitation forest-size of the buffer 1048576

    logging buffered information

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    mask 10.6.4.1 - 10.6.7.254 255.255.252.0 IP local pool PoolAnyConnect

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm - 66114.bin

    enable ASDM history

    ARP timeout 14400

    NAT (inside, outside) static source any any static destination PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

    NAT (exterior, Interior) static source PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

    Access-group outside_in in external interface

    Route outside 0.0.0.0 0.0.0.0 DefaultGW-outdoor 1

    Route inside 10.0.0.0 255.0.0.0 DefaultGW-Inside 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA-Server LDAP protocol ldap

    AAA-server host 3.3.3.3 LDAP (inside)

    Timeout 5

    LDAP-base-dn o = xx

    LDAP-scope subtree

    LDAP-naming-attribute sAMAccountName

    novell server type

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    AAA authentication enable LOCAL console

    AAA authentication http LOCAL console

    Enable http server

    http 0.0.0.0 0.0.0.0 inside

    http 2.2.2.2 255.255.255.240 outside

    Telnet timeout 5

    SSH 0.0.0.0 0.0.0.0 inside

    SSH 2.2.2.2 255.255.255.240 outside

    SSH timeout 10

    Console timeout 10

    management-access inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    SSL cipher aes128-sha1 aes256-3des-sha1 sha1

    WebVPN

    allow outside

    AnyConnect essentials

    AnyConnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    internal GrpPolicyAnyConnect group strategy

    attributes of Group Policy GrpPolicyAnyConnect

    value of server DNS 1.1.1.1 1.1.1.2

    VPN - 1000 simultaneous connections

    client ssl-VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value in tunnel

    field default value xx.xx.xx.xx

    admin Dp4l7Cmqr7SMHl.l encrypted privilege 15 password username

    tunnel-group AnyConnect type remote access

    tunnel-group AnyConnect General attributes

    address pool PoolAnyConnect

    LDAP authentication group-server

    Group Policy - by default-GrpPolicyAnyConnect

    tunnel-group AnyConnect webvpn-attributes

    enable AnyConnect group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    inspect the ctiqbe

    inspect the http

    inspect the dcerpc

    inspect the dns

    inspect the icmp

    inspect the icmp error

    inspect the they

    inspect the amp-ipsec

    inspect the mgcp

    inspect the pptp

    inspect the snmp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:9399e42e238b5824eebaa115c93ad924

    : end

    BTW, I changed the NAT configuration many attempts the problem, this is the current...

    YPU need to allow your client VPN address pool (10.6.4.1 mask - 10.6.7.254 255.255.252.0) ssh and http from 'outside' access, which is where they come from. Add them to the:

    http 0.0.0.0 0.0.0.0 inside

    http 2.2.2.2 255.255.255.240 outside

    SSH 0.0.0.0 0.0.0.0 inside

    SSH 2.2.2.2 255.255.255.240 outside

  • New to pix, need help with "debug access list of all the" command

    I have a pix 515 v6.3. I am tring to use then "debug access list of all the" command to see what traffic is stopped by my access list. However, I don't get any output. I turn execution of the command, but nothing happens. Other debug commands give the console. Perhaps, I do not understand what "debug to access list of all the" is used for. Any help that can be provided would be greatly appreciated.

    Tim

    Also try following the commands of logging

    LOGG on

    LOGG buff 7

    term Lun

    M.

  • Transfer the image to the ASDM ASA on the anyconnect VPN

    I'm relatively new to the ASA firewalls.  My previous experience of firewall is a firewall provider.  I work with an ASA 5515 - X running ASA 915 and ASDM 713.  I connect Windows 8 and therefore improve the ASDM to 731.  I've done it before no problem.  My problem with this particular update is that I really need to download the image to a VPN connection.  I can't configure a NAT device on my end to allow the ASA to connect to my public IP address - so I can connect to the ASA via anyconnect.  I can't SSH in public IP address of the ASA (for now) but I can't transfer the asdm image obviously not my public IP b/c I have no NAT on my end.  So I connect my PC to the anyconnect service and get an IP VPN.  I need to run the command:

    copy ftp://user: [email protected] / * *//asdm-731.bin disk0:

    I get the following output: for access to the ftp://user: [email protected] / * *//asdm-731.bin...
    Error opening % ftp://user: [email protected] / * *//asdm-731.bin (Permission denied)

    Anyone know good ways to solve this CLI only?

    Thanks for your help.

    Zach

    Looks like a FTP permission problem. The user has read access? Also, make sure that your 8 victory is tuned for FTP requests on map virtual VPN.

    one of the other option is to use a host of jump in your lan behind asa and open the asdm from there, using asdm, it will be easier to copy the file to asa flash.

  • I can't ping the interface inside of asa or telnet, when I came across the anyconnect vpn

    Hey Cisco net guys pro

    When I connect via anyconnect VPN to ASA 9.x, OS, I cannot ping inside
    the interface of asa or telnet, but I could ping at the interface of the router address
    ASA, the same two subnet

    Telnet 0.0.0.0 0.0.0.0 inside

    ICMP allow any insid

    Hi Ibrahim.

    Try 'inside access management' and let us know how it rates.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • Hide the AnyConnect VPN AnyConnect GUI Module

    Dear team

    We are wired deployment 802. 1 x with Posture and that NAM is sufficient for us.

    but when installing AnyConnect vpn module must be installed and cannot be avoided, so VPN tab is also visible in the GUI AnyConnect interface,

    I need to disable the VPN tab from the interface chart anyconnect, because it is not used and confusing for end users.

    We have anyconnect-win-4.1.00028-pre-deploy-k9.

    We have a manual installation of AnyConnect on PC or Client Provisioning, we don't use MSI

    Please suggest 'VPN profile' to end users, which will hide this vpn module.

    Thank you

    Ahad

    Your situation is highlighted in the AnyConnect Administrator's Guide as well:

    When you configure the object Configuration AnyConnect to ISE, unchecking the VPN module under the AnyConnect Module selection does not disable VPN on the customer deployed/put in service. You must set VPNDisable_ServiceProfile.xml to disable the VPN AnyConnect GUI tile. VPNDisable_ServiceProfile.xml is on EAC with other files AnyConnect.

    The xml file, you need should be on the AnyConnect downloads page, but is not. There's a BugID noting that (CSCus26084). Work around the BugID does not work for me, but it could for you.

    The profile CAN be found in the msi file - if you open with 7-zip, you can find the file. She is short, so I'll just paste here:

         true  

  • Cannot lock the MacBook Pro with Apple Watch

    I do not see in Preferences-> Security & privacy-> system "Allow your Apple Watch unlock your Mac."

    The screen is just as it was before the Sierra.

    MacBook Air 13 "early 2015 - Sierra 10.12/Apple Watch - WatchOS3

    See you soon!

    I, too, am unable to lock my MacBook Pro with my Apple Watch. However I don't see the checkbox "Allow your Apple Watch unlock your Mac.". I checked it but I can not unlock my Mac with my Apple Watch.

  • prevent the SSL VPN user to access ASA cli

    Hello

    I set up multiple users on my ASA in its local database.

    These users are used for the ssl vpn connection, but the problem I have is that users

    also have SSH access. Is it possible to avoid this?

    Thank you

    Hello Raf,

    If you do something like this:

    username xxx attributes

    type of remote access service

    the user should not get access CLI more.

    Kind regards

    Bastien

  • CSA with the Client VPN and remote access

    Hello world!

    I have the folowing isue: I have to tune in to the CSA for a clinet it connects remote with VPN Client only. He should not be able to connect to any other network or lan or dial-up.

    No idea what the policy should change or tune?

    Thank you

    You can create an access network rule that depends on a State of the system. The State of the system can be defined to have a game of skill, which belongs to the range of VPN and the network access rule would declare that the client computer cannot act as a server on UDP/TCP ports when the State of the system is ensured.

    So, if the laptop is not connected to the VPN, it would not be able to act as a server for connections to all and will be locked out. You will need to create an exception for the IP address of the VPN server to your corporate offices and allow the CSA client opening these ports.

  • Anyconnect VPN with machine in the field

    Hello people,

    I would like to set up my vpn to recognize and allow to connect to the VPN only if the computer is a member of the domain (AD).

    Is it possible?

    How can I do?

    OBS: My VPN have a DAP configured to recognize the members of the group in the ad (users)

    Thank you

    Marcio

    Hi Marcio,

    I see, okay in this case is what you want to deploy HostScan so it can analyze endpoint to connect to the ASA. This analysis report will be sent to the ASA and you can create DAP strategies against certain attributes that allow the connection. Once you have applied the DAP you want to allow, and then you must set the value by default DAP end connections. Make sure you to be very specific with the DAPs permit and your client are in line with what you get closer you can otherwise have unauthorized clients that connect or users who cannot connect. the end points that do not meet the criteria will get the default and terminate the connection.

    DAP and HostScan being so versatile, that it is difficult to find documentation on it or examples of specific configuration. I think that the requirement must run 8.4 or higher if. We can help you here at TAC with the configuration if you need assistance.

    I hope this helps.

  • CIsco Anyconnect VPN with LDAP AAA

    Hi there, I was hoping that someone can point me in the right direction here. I created a VPN connection profile to match anyconnect SSL entering customers. I would like to use LDAP group membership as a sine qua non for authentication. I found a few online pages on what to do about it, I followed. Unfortunately, it seems my connection profile to allow access to any user in the ldap, not only those of the ldap group database. I'll post the relevant bits of the config here in hopes that someone can point my mistake!

    The idea of the config is to have the map of connections 2 by default a noaccess policy which has 0 simultaneous connections and the profile card (SSL_VPN) connection ssl to anyconnect to group_policy_SSL_VPN group policy.

    local pool CONTOSOVICVPN_DHCP_POOL 10.0.5.51 - 10.0.5.254 255.255.255.0 IP mask

    NAT (inside_int, any) static source NetworkGroup_Internal_networks NetworkGroup_Internal_networks Network_VPNRANGE_10.0.5.0 Network_VPNRANGE_10.0.5.0 non-proxy-arp-search of route static destination

    LDAP attribute-map AuthUsers
    name of the memberOf Group Policy map
    map-value memberOf memberOf CN = NETWORK_CONTOSO_ASA_VPN_DLSG, OR = network, OU = resources, OU = CONTOSO, OU = security, OU = Groups, DC = CONTOSO, DC = group

    ynamic-access-policy-registration DfltAccessPolicy

    AAA-server CONTOSOVIC_LDAP protocol ldap
    AAA-server CONTOSOVIC_LDAP (inside_int) 10.0.0.45
    LDAP-base-dn DC = CONTOSO, DC = group
    LDAP-group-base-dn DC = CONTOSO, DC = group
    LDAP-scope subtree
    LDAP-naming-attribute sAMAccountName
    LDAP-login-password *.
    LDAP-connection-dn CN = ASA_LDAP_USER, OU = network, OU = accounts, DC = CONTOSO, DC = group
    microsoft server type

    No vpn-addr-assign aaa
    No dhcp vpn-addr-assign

    SSL-trust ASDM_TrustPoint4 outside_int point
    WebVPN
    Select outside_int
    AnyConnect essentials
    AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal NoAccess group strategy
    Group Policy attributes NoAccess
    WINS server no
    VPN - concurrent connections 0
    Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
    value by default-field CONTOSO.group
    disable the split-tunnel-all dns
    attributes of Group Policy DfltGrpPolicy
    VPN - concurrent connections 0
    client ssl-VPN-tunnel-Protocol ikev1 l2tp ipsec
    internal GroupPolicy_SSL_VPN group strategy
    attributes of Group Policy GroupPolicy_SSL_VPN
    WINS server no
    value of server DNS 10.0.0.45
    VPN - connections 1
    Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
    value of group-lock SSL_VPN
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list VPN_SPLIT_TUNNEL
    value by default-field CONTOSO.group
    activate dns split-tunnel-all
    the address value CONTOSOVICVPN_DHCP_POOL pools

    attributes global-tunnel-group DefaultRAGroup
    authorization-server-group CONTOSOVIC_LDAP
    NoAccess by default-group-policy
    authorization required
    tunnel-group DefaultRAGroup webvpn-attributes
    message of rejection-RADIUS-
    attributes global-tunnel-group DefaultWEBVPNGroup
    NoAccess by default-group-policy
    type tunnel-group SSL_VPN remote access
    attributes global-tunnel-group SSL_VPN
    address CONTOSOVICVPN_DHCP_POOL pool
    authentication-server-group CONTOSOVIC_LDAP
    authorization-server-group CONTOSOVIC_LDAP
    Group Policy - by default-GroupPolicy_SSL_VPN
    authorization required
    tunnel-group SSL_VPN webvpn-attributes
    message of rejection-RADIUS-
    Proxy-auth sdi
    enable CONTOSOvicvpn.CONTOSOgroup.com.au group-alias

    You must specify the NoAccess group policy as group policy by default for the Group of the SSL_VPN tunnel.

    Remember to rate helpful answers. :)

Maybe you are looking for