Lock the movie clips Y pos

Similar Questions

• Images of iPod touch - volume of the .mov clips

  Hello

  When I use an iPod touch pictures, the .mov clips sound volume is too low, even if I turn as hard as possible in Final Cut. How can I get stronger?

  Thank you!

  Unfortunately, it really isn't that you can do. You could make a new project and put just the clips that need to be more strong in there, then set volume as loud as it goes, then export than as a video, and then import that new video in your regular project (except that it is strong this time) and you can increase the volume at maximum again. If all goes well, which should help. However, the quality may be slightly reduced.

• AS3: see the hide the elements of the movie clip, single button array.

  Hello and please forgive my Noobdity I teach myself AS3 and stuck on what are obviously the basics.

  I did the simple animations for years without using any AS3 at all, the time has come to take seriously.

  I read the daylights out of all reference documents Adobe now but I am stuck on this task.

  I have 4 objects of movie clip whose visibility I control with two buttons.

  First button, two of these visible clips and the other two will make visible = false

  For example: Mc1 and Mc2 > visible, Mc3 and Mc4 > visible = false

  The second button run the same function but in reverse

  Eg: Mc1 and Mc2 > visible = false, Mc3 and Mc4 > visible

  I've determined correctly or incorrectly reading endless and looking for a table should be the best way to do it.

  I may have to use the child feature add but * shrugs, I'm lost atmo

  I've been blunders on the code for the first of two simple buttons.

  I start slowly form a mindmap what should be done, but it's early days.

  Here is my code and please feel free to

  Last attempt tries to use the mouse on the trigger to control the visible state of the second two clips.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  internal _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.visible =! item.visible;

  }

  }

  acComp_btn.addEventListener (MouseEvent.MOUSE_OUT, _wcComp);

  internal _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.visible =! item.visible = false;

  }

  }

  Currently run 1050 error: impossible to assign a value, not reference.

  The text in blue works with 2 clips of film acArray of course, where the attempt to use the mouse on.

  Any advice on the solution or the best method to implement would be greatly appreciated.

  For what you're trying to make a table is more complication than a solution, you have already divided in two arrays anyway probably due to this tax... and have two buttons to do isn't necessary, but you may already be knowing that since you have only code for one of them in any case.

  All you need is a button that activates the visible properties to their opposites.

  var array: Array = [myMovieclip2, myMovieclip3, myMovieclip1, myMovieclip4];

  myMovieClip1.visible = myMovieclip2.visible = false;  or the other two... depending on what initially as invisible

  btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans tableau)}

  Item.visible =! item.visible;

  }

  }

  LF, you must have two buttons to do the opposite, as you say, then clicking on buttons must end up affecting all the buttons, no not only one of the tables you have done.  If each button should do what you say, then you should not use the! operator since that can go the opposite of what you intend, so you must assign the desired state.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in wcArray)

  Item2.Visible = true;

  }

  }

  wcComp_btn.addEventListener (MouseEvent.CLICK, _wcComp);

  function _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in acArray)

  Item2.Visible = true;

  }

  }

• Verification of the Movie Clip instance

  Is it possible to check if a case of button is available on a certain range?

  i.e.

  Frame 1 has the following movie clips

  a_btn

  b_btn

  c_btn

  Frame 2 has the following movie clips

  a_btn

  c_btn

  I want to check if buttons a, b, c, is available on picture 2 and run a corresponding feature if condition 1 or condition 2 is met

  You can use a simple conditional to check if an object is present...

  {if (a_btn)}

  trace ("Yes");

  } else {}

  trace ("no");

  }

• How can I enlarge the movie clips? [with pictures]

  

  There are 9 video clips in each square (object) and the color in each video clip can be changed by mouse click.

  
  However, if I want one of the spaces enlarge by clicking on it, then I can click on each video clips to change the color.

  How can I do? Can I create another movie clip and cover the place to click to enlarge?

  Please help me! Thank you!!!

  AS2 or AS3? AS2, you can disable the movieclip which is clicked by mc.enabled = false; For AS3, you can either remove the event listener as mc.removeEventListener ("your event type used listener", onClickFunc) or you can add a flag (Boolean variable) you set to false when it was enlarged and use it to check your onClickFunc and decide whether to change the color of a movieclip or not.

• Button inside the Movie Clip

  I need to find a way to make a clip or a button click on, and then lead to a clip that opens a window with data and has a box of x to leave this movie clip. I also need this box WITH the x to be moved together. I can't get the closing work, anyone can please help? !

  See my account for more details please

  //Louisville,CO -------------------------------
  
  louisville_btn.onPress = function () {
       louisville_box.gotoAndPlay("play");
  }
  // DRAG
  louisville_box.onPress = function(){
       startDrag(louisville_box);
  }
  louisville_box.onRelease = louisville_box.onReleaseOutside = function(){
       stopDrag();
  }
  
  louisville_drag.closeBox.onPress = function() {
       startDrag(this._parent);
  };
  
  louisville_drag.closeBox.onRelease = function() {
       stopDrag();
  };
  
  closeBox.onRelease = function() {
       louisville_box.gotoAndStop("stop"); 
       };
  

  Since you will have a lot of cities, buttons boxesand sharing the same code, it is best to put all the code in the main storyline (the first image).

  If you write code at the beginning that refers to an object that is not currently part of the scene (such as a button that is located on the second frame of a movieclip, which has a code stop() on the first picture), this code never reached its target.

  Similar: If you catch a MouseEvent as onRelease at the parent level, the event is not registered for the child.

  Hope that the attachment is what you had in mind.

  Nice graphic btw

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• only to learn... helps on the movie clip buttons

  I tried tons of tutorials and I can't seem to get my movie clip button to work when I put the mouse over the button.
  
  I've included a screenshot of my line of time and code.
  
  Layer 10 Framework 1 where is the script.
  
  layer 'actions' has my codes 'stop' in frames 1 and 20
  
  code and schedule
  
  
  Thanks for your help.

  replace 'home' with 'this '. and if the compiler complains about your code in e.currentTarget as a MovieClip.

• Continue after the end of the Movie Clip on the timeline

  Hello:

  So far so good. But I need the timeline to keep playing after the end of my MC.

  From now on chassis #45 of my calendar, I have this script on my scripts layer:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  All so far works fine, but after the end of the MC (fl.video.FLVPlayback), it does not continue down the timeline to the end.

  Any help, please?

  Thank you very much.

  use:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  Video.addEventListener (Event.COMPLETE, completeF);
  function completeF(e:Event):void {}
  Play();
  }

• AS3 putting the buttons inside the Movie Clip

  I'm practicing AS3 (after years of AS2) and can't have a button inside of a clip speaks to another clip on the main timeline. Here is the code:

  OneButton.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  }

  TwoButton.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  }

  The code above works, but if I put OneButton and channels within a clip, I know can target the MovieTarget and MovieDescription. The reason that I want to put OneButton and strings inside it's own MC is so I can dim each hit after top by switching the playhead within this MC help. ? Thank you!

  Start from the beginning

  Press f8 and choose movieClip, then draw your button movie untoggled call then create another movie and create your button toggled or grayed button and call it greyedButton.  Go to the main stage add 2 instances of button and 2 greyedButton (just drag the library).  you have 4 instances on stage.  give the name of the instances of appeal and place them one over the other so you can see 2 buttons on the stage.  put the button greyed under the button.

  now with action script

  Button1.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  Button1.visible = false; Here the button greyed will show

  }

  Button2.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  Button1.Visible = true; Here button1 will return to its orignal State

  Button2.visible = false / / here will show the button greyed

  }

• Need of the Movie Clip to loop continues after the end of the main movie

  Kind of a noobie questions. I want my main movie to play once, but I want that some clips of films to continue after stopping everything.

  Basically I have about six video clips (on a separate calendar) falling snowflakes. I just continue their loop than any other while what remains in place.

  I think I uncheck "Loop" in the main parameters of publication, then place an action somewhere in the clip? If you could, be very specific where to place the shares (the exact structure, in scenario clip main timeline or movie, etc.)

  Thank you very much!

  I don't know what you mean when you say 'a separate calendar', but if you have movieclip objects that animate along their own calendars, the only thing you need to do to keep them in the loop is to NOT put a stop() command in their timelines.  They will automatically loop on their own, regardless of what makes a different chronology.

• return to the main timeline of the movie clip

  well on my main script, I have an intro, and then a main menu. in this menu, it goes to a clip, I want to create a "back to main menu" button inside the movieclip that will return a certain group in the main timeline.

  can someone help me in this encoding to use?

  see you soon

  What about the fact that you have a problem with?  Do you know how to code a button? If Yes, you can program the button in the main timeline so that all you have to do a gotoAndStop() command is used...  In the main scenario where there is the mc...

  yourMC.theMCButton.addEventListener (MouseEvent.CLICK, gotoMenu);

  function gotoMenu(evt:MouseEvent):void {}

  gotoAndStop (menuframe);

  }

• Name of the movie clip as a variable?

  I think that this should be a pretty simple answer, but it's deceiving me. I want to assign the name of a clip to a variable and then use that variable to control any video clip he happens to be held. Let me give you an example:
  
  The script would be part 1:
  
  button1_mc.onRelease = function() {}
  If (_global.selected! = 'button1_mc') {}
  _Global.selected.gotoAndPlay ('out');
  _Global.selected = "button1_mc";
  }
  }
  
  button2_mc.onRelease = function() {}
  If (_global.selected! = 'button2_mc') {}
  _Global.selected.gotoAndPlay ('out');
  _Global.selected = "button2_mc";
  }
  }
  
  Is it achievable even remotely? I can't make it work at all. I was hoping that I just needed another type of variable...

  Hello

  _Global.selected.gotoAndPlay ('out') get a property/MC named 'chosen '. If you want to use the value of the var, you can use the scoreboard operator. To do this, you must know that accompany the MC your other MCs. Assuming that it is _root, you can use the attached code. Note that there is no dowry. between _root and support.

  HTH,
  blemmo

• Duplication of the Movie Clip in an array in AS3

  Hello world
  I am writing an interactive 'bingo' game that creates a map of bingo with 20 boxes. In AS2, I used duplicateMovieClip and 'push' ed twice in one table. I have them could access each video clip when you click them (to put a cross on or off on the clip). I am new to AS3 and am really struggling to familiarize themselves with the new coding protocols. Can someone help with the attached code?
  My original video clip is called symbol_box_mc and the table in that I want to push symbol_box
  I have a load of questions about this project, but one step at a time!
  Previously, I set the table with...
  var symbol_box:Array = new Array();
  

  I guess the reason is that you use Sub in
  .addEventListener(MouseEvent.CLICK,_show_cross):void symbol_box [t]

  void is a return type and cannot be used in the method call. Delete: Sub.

• Attach the movie clip speed increase after 2 min

  I'm a falsh as2 game

  See this link for http://createview.in/try/game.html

  This function for a fruit.

  so there are 10 features I want to increase the speed of fruit drop after 2 min of user challenges

  makegd is a function of the fruit bonus gold it will come every 3 minutes

  PLEASE HELP ME!

  function makeOne() {}

  If (seconds > 0) {}

  clearInterval (ranOneID);

  has run = (Math.random () * 10000 + 8500);

  ranOneID = setInterval (makeOne, ran);

  A = _root.attachMovie ('n_red', 'n_red' + depth, depth ++);

  nBalls.push (One);

  trace (allBalls);

  One._x = Math.random () * 500;

  One._y = - 350;

  One.Speed = (Math.random () * 3) + 2;

  }

  One.onEnterFrame = function() {}

  This ._y += this.speed;

  If (this ._y > Stage.height + 100) {}

  updateScore(-5);

  Black = Black + 1;

  for (i = 0; i < allBalls.length; i ++) {}

  If (this is {allBalls [i]})

  allBalls.splice (i, 60);

  }

  }

  this.removeMovieClip ();

  }

  {if (this.) HitTest (slider_mc. Kat))}

  Red = Red + 1;

  }

  };

  }

  function makegd() {}

  If (seconds > 0) {}

  clearInterval (rangdID);

  rangdID = setInterval (makegd, ran);

  GD = _root.attachMovie ('golden', 'golden' + depth, depth ++);

  goldenBalls.push (gd);

  trace (allBalls);

  GD._x = Math.random () * 500;

  GD._y = - 100;

  GD. Speed = (Math.random () * 8) + 3;

  }

  gd.onEnterFrame = function() {}

  This ._y += this.speed;

  If (this ._y > Stage.height + 100) {}

  updateScore(-5);

  for (i = 0; i < allBalls.length; i ++) {}

  If (this is {allBalls [i]})

  allBalls.splice (i, 1);

  }

  }

  this.removeMovieClip ();

  }

  };

  }

  makeOne();

  makeTwo();

  makeThree();

  makeFour();

  makeFive();

  makeSix();

  makeSeven();

  makeEight();

  makeNine();

  makeTen();

  setTimeout(makegd,180000);

  :

  var speedVar = 2;

  setTimeout(speedF,120000);

  function speedF() {}

  speedVar ++;  pay by your needs

  }

  function makeOne() {}

  If (seconds > 0) {}

  clearInterval (ranOneID);

  has run = (Math.random () * 10000 + 8500);

  ranOneID = setInterval (makeOne, ran);

  A = _root.attachMovie ('n_red', 'n_red' + depth, depth ++);

  nBalls.push (One);

  trace (allBalls);

  One._x = Math.random () * 500;

  One._y = - 350;

  (Math.random () * 3) = One.Speed + speedVar;  Depending on what you want, you can also use a variable instead of 3.
  

  }