Locked administrator

Similar Questions

• HP Officejet 7612: Error Message: ion of wireless communication has been disabled - HP OfficeJet 7612

  Trying to put the printer on the wireless network, but I keep get message that implemented has been blocked on this machine, please contact your administrator or the person who set up the printer.

  Hey @pennysem,

  Welcome to the Forums of HP Support!

  I understand that your HP Officejet 7612 Wide Format e-all-in-one seems to have a blocking administrator on what prevents you to set up a wireless connection between your printer and your computer Windows 8.1. I would like to help you today with this problem of locking administrator.

  Now I will send you a private Message with instructions on how to perform a Semi full Reset programming on your printer. Please check your Private Messages for instructions.

  If you reset that I have as much solves this problem, please indicate my post as a Solution for other users of the HP Support Forums can easily find these steps. Good luck!

• Computer sporadically stop alone.

  Just yesterday and today, my computer just turns off, turns on with a locked administrator which I can not connect to and said then it disconnects from a distance. I double checked for malware, cleaned a threat and restored the system settings of the week last in the hope that this stops. What is going on?

  Hello ShariKee,

  the system is able to boot in safe mode?

  If so, try a clean boot.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please let us know.

  Best regards

  Matthew_Ha

• Laptop died during the system recovery

  During a system recovery, my laptop died. I plugged it all in a row... but when I turned it on a message comes up. "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. "So I clicked 'OK' and it happened on the screen, he's going to when you log out, and then it restarts. After that, the same box back upward. So I shut down my laptop and when I turned it back on, it goes into the newspaper. It shows the Administrator icon and it says "locked administrator" I clicked it and it then says: "your account is disabled. Please consult your system administrator. »
  

  
  

  Is there anyway that I can make another recovery system? Help please!

  For problems/questions about the recovery process, contact the manufacturer of your laptop.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Search engines not available, except in mode "Run as Administrator". delete the parent.lock file profiles did not help

  After the upgrade to 21 FF, search engines no longer appear in the bar at the top right of the screen, so no searches are possible. I can navigate to my favorites and apparently also to the links contained in the e-mails.

  If I right click on the FF icon and choose the "Run as Administrator" option, the search engines are there again. I tried to delete the parent.lock in the profiles folder, that this solution was solved a problem I've had recently with the previous version of FF (not being not able to open FF and getting the error message on another version of it running, which had to be closed in the first place - but there was no other version running.) In this case, too, before I discovered the solution, I could open FF using the option "Run as Administrator"). However deleting the parent.lock file does not resolve this issue.

  I would be grateful for your help, especially if a person not very computer like me can understand put in simple terms!

  You have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder?

  Try to remove the file search.json and a possible search.sqlite in the Firefox profile folder to reset the default search engines.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file

  Firefox will rebuild the file search.json from the default search engines in the browser\\searchplugins file in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• OfficeJet Pro 6835: Capabilities of integrated network disabled by the administrator. All mechanical functions are locked. Help!

  I clicked on utilities (from my Macbook) HP botton 'Disable all' for scanner and HP printer. Now, all functions (such as wireless communication) and features (each button on the touch screen of the printer) are locked.
  
  The message appears on the touchscreen specifies "contact the system administrator or the person who set up the printer.
  
  Where can I access the command directory "Administrator"? On my Macbook? Or via HP online account user? Or some kind of password-key - assigned to the Pro OfficeJet 6835 on the printer itself? It's very confusing that nowhere can I find the directory "Administrator" of all of the above.
  
  Without a solution, I've looked everywhere in the HP online support, read JO 6835 Pro manual, as well as follow-up steps for the hard-reset and tried to re - start the pritner with cable router. The printer is still loked up and the wireless icon is grayed out. Then the last attempt is I uninstalled printer HP application of my Macbook and I tried to reinstall the software again, now I got the message "installation failed." At this point, I don't know what to do.
  
  PS I wanted that HP could have designed a botton "reset" on the machine, so to avoid the problems of 'blocking' and make the user experiences more user-friendly.

  Hi @VirtuoCity,

  I read your post and see that you need to reset the printer. I want to help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP officejet pro 6830: locking of the administrator

  Computer a major accident.  Now can not set or access all the settings through the printer wireless or the

  ALL in one software.  Need factory reset procedures, any help would be appreciated.

  Thank you

  Hi @drmjr,

  Welcome to the Forums of HP Support! I see that you are currently locked out of your HP Officejet Pro 6830. This occurred when the computer that is running the Windows 7 operating system has crashed.

  You should be able to do this by restoring the default network settings in the front panel:

  Menu Configuration > Wireless > restore default network settings > Yes

  This aid? If this is not the case, continue below:

  The lockout is really designed for printers to prevent others to make changes to printer that could affect the behavior of the printer.  For example, to keep the date and time the Fax value see him exactly receive time.

  Get the IP address of the printer by pressing the network icon at the top of the screen.

  Enter this IP address into the address bar of a web browser on a computer.  Printer status page should load.  If you receive warnings of certificate, choose the option that allows you to continue anyway.

  Click settings and then go into settings of the administrator on the left.  Many of the features of the façade are ordered here. Make sure everything is checked except control lock. Once it is defined, click on apply.

  Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• Win XP computer locks with administrator

  Hi all

  I have a bit of a problem, we have a network and AD installed a week, to the end, some people facing a problem is that they are working on something and computer suddenly decides to logg off the coast of the user and lock the computer with the administrator and they're sitting there watching all their all the hardwork go far closing programs and they are unable to do anything.

  We have Enterprise edition Macfee which update every night and I planned a full scan of the computer, even after complete scanning macfee is unabel to find viruses do not know what to do

  Help, please

  Hello lahoree.

  I would check to see if any logoff script is currently running on Windows XP clients. Then check the event log to see if something is listed there during the time the user is disconnected. You can configure auditing to log out.

  However, since you are in a domain environment, it would be better to post in the forum TechNet for ITPRO.

  For Windows XP clients, use the link below:
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Or you can post in the Windows Server forum.
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  I hope this helps.

  Marilyn

• PresarioCQ62: My laptop locked out and do not know the administrator password or power on password. Help!

  I bought a laptop from someone & when I turned it on it was locked & I do not know the password.

  As soon as I turn it on it says "power on password or administrator password.

  When I type a password after 3 tries & is incorrect, it says 'Disabled system' the code is: 66250741

  I never had this problem & im not at 100% in computing either. I know how to make it work, but I've never heard of an admin password. Can someone help me?

  The model is CQ62-219WM

  Hello

  Enter: 79138387

  Kind regards

  DP - K

• Screen saver turns on (Windows XP SP3) and lock the computer and the user cannot log back with their credentials without administrative rights

  When the screen saver is used and the user returns to open a session.

  they get...

  This workstation is in use and has been locked.
  The workstation can only be unlocked by user123 or an administrator.
  Press CTRL + ALT + DELETE to unlock this workstation.

  user123 cannot log back in. unless he made a system admin an administrator connections or user must reboot the machine to reconnect.

  Hello

  -Is the computer connected to a network domain?

  Please follow the steps mentioned below and get back to us with the results.

  Cannot lock a "locked" computer administrator.

  http://support.Microsoft.com/kb/242917

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the link below.

  Information about unlocking a workstation

  http://support.Microsoft.com/kb/281250

  If the computer is connected to a domain, I suggest you to post your questions in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope that helps!

• while sleeping, the computer is locked and cannot be opened by the administrator

  Help. I have an old computer second, forwarded by a friend that I have more contact with. This computer is used daily by another friend who doesn't have a computer.

  every night the computer go to sleep and the next day when he woke up that my bud Gets a message that it is locked and only the admin can open it.

  I changed it to the administrator, but when the screen opens and he tries to enter the password, the screen seems FROZEN and don't let him enter his password.

  . the only way to work around this problem seems to be to restart. as the machine is old, reboot may take 10 minutes or more. What can be done to avoid this mess?

  Oddly it only happened in the last 2 weeks... for almost a year that wasn't a problem...

  concise simple tips are appreciated.

  Steve

  Hello

  See if that helps you.

  The second part is on XP and standby / sleep of password.

  http://www.mydigitallife.info/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

  And there is an option of password screensaver in XP, too;

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_assign_screensaver_password.mspx?mfr=true

  Doing this is reverse:

  http://www.computerhope.com/issues/ch000790.htm

  See you soon.

• Passwords do not work to retrieve the files that I locked for the protection of personal information under my administrator account.

  I had some that I have files protected by Word, under my administration account that s wa also password protected. recently, I had to have my computer reformatted and returned it to me without administrative access, research nothing same and none of my passwords work to open these locked files. Please help me... inside one of them was a picture of my husband roommmate that he has lost the war. I need to these files and photos.  Thank you!  BTW I don't know if I have windows xp or pro.  Thanks again

  Would you be able to help me more if I had administrative control?  Because the place that did that at my computer only altered my administrative control, if I'm not mistaken it is still mine.

  At this point, you should probably take the computer to the one who did what they did and ask them to retrieve the files for you.

• Locked as administrator on Windows Vista.

  Do not accept the password. Am not familiar with changing the boot options so that the PC read a CD - RW. Many attempted to change startup options, but I think I did more damage. He said that Vista is almost impossible to re - set password when the administrator is then locked. Can help you? Have been down for a week now. Had to happen at the party! Thank you.

  Hello

  Microsoft has a strategy for password and I would suggest that you check out the link for more information.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126?WA=wsignin1.0

• Administrator locked out

  I have a feeling that I'm in big trouble sinking. As admin without pass code protection, I accidentally hit the lock button. The operating system is Vista. I'm not the only user, so I opened in safe mode and could yet climb. I connected as her husband and it worked fine, but I could not on my account. If I try it won't let me. As a husband, I can't change anything. I have NO discs of all kinds, as this computer was given to me from my sister, when STAPLES destroyed my last computer tries to remove a virus. She had brought it to "geeks" to clean it back to the original, so they must have created the original disc and not given to him. I hope that there is a will. Any help is much appreciated / thanks in advance.

  Hi Anne,.

  Thanks for posting your query in Microsoft Community.

  The description of your problem, you are not able to connect to your administrator account.  I'll be happy to help you.

  What is the accurate and complete error message you get when you try to connect?

  Microsoft technical support will not be able to help you recover passwords. I suggest you to see the following link for more information.

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

  I hope this helps.