Locked drawer

Similar Questions

• Reference Dell e5500 a lock drawing

  My Dell e5500 lights not... And a lock with a symbol flashing on the pavement. I also diagnoses on the display head. Works perfectly... But after this same question appear...

  Hello

  Please write to us.

  When the issue started? Have you recently made any hardware or software changes?

  Please do a power cycle by removing the battery (you need to remove the front panel out the battery) and adapter, hold down the power button for 10 seconds, and then try again.

  Remove the memory and try with a memory at a time and observe the changes.

  Await your response.

  Concerning

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Turning to black screen after the value time/RAM used FireFox

  Hello

  My question is for the graphics. It lasts for several months now and he came to a point where it starts eating away at me.

  I installed recently (within 6 months) 16 GB of RAM and a new extra GPU. I upgraded to an ATI Radeon HD 5750 to a Gigabyte Radeon R9 x 270. I never had this problem with my 5750 card, so that initially led me to believe it was a card problem, until I discovered that my problem seems to be ONLY with FireFox.

  Now to the question: arriving to 2.8 GB + of memory used (according to Task Manager), FireFox flashes for a brief moment and to scroll the screen or between tabs, becomes completely black, forcing me to re - load the browser. Now the first question of the use of FireFox, so initially, amount of RAM is crazy, and I tried to lower the settings by disabling extensions, all sorts of things and the fulfillment of the only thing that is extend the time before flash made his boring appearance.

  The screen flashes problem seems to be quite something else. I tried to upgrade to the latest version of FireFox, run a new installation of FireFox, update my graphic drivers their latest versions, just about everything I can think of, and nothing seems to fix. What seems to be the problem here? I would be very happy all feedback and better understand how I can solve this problem outside hard using a different web browser.

  Hardware specifications:
  Motherboard ASUS P6X58D
  Intel Core i7 930 @2. 8 GHz processor
  22 GB of total RAM (3 branches of 2 and 2 strips of 8)
  Gigabyte Radeon R9 270 x GPU
  Brand/model unknown 850W of power (honestly, I'm just too lazy to remove the top of my tower which is packed in a locked drawer to figure out the make and model at display time)

  Running FireFox in safe mode seems to have solved or at least slow the excessive RAM issue however FireFox has now terrible performance much earlier. Adding constantly freezes and scripts constantly crashing, it would seem that addons and extensions that I ran helped to solve these issues.

  What I do now is to reload firefox standard and turn my extensions one by one to see which seems to be the cause of most of the points in the use of the ram.

  AdBlock Plus seems to so far be keep stable FireFox without problem. Going to turn in my next toolbar. Will edit this post more information after having observed the behavior of FireFox.

  Edit: The reason to believe it's my toolbar like with AdBlock plus, FireFox was still around or less 1 GB to use physical RAM. After the reactivation of my toolbar, I jumped up to 2 GB. Contact the developer of the toolbar soon.

• How to print to tray 2 on an HP Officejet Pro 8500 has a bonus?

  I can understand photos not be printed on plain paper in tray 2 (sort of), but I can't print emails or web pages to tray 2 of either ePrint Airprint GOLD.

  I have tray 2 as default and 1 locked drawer.

  If I try to print it will try to print from Tray 1 (containing the envelopes). the 8500 realizes the error and cancels printing.

  How can I print to tray 2?

  Thank you

  DHK

  Hey wa1oui!

  Unfortunately, ePrint or AirPrint support printing on tray 2 right now. If you print from an iPad/iPhone or other mobile device, you can use ePrint home & Biz application that will allow you to select a specific drawer.

  I hope this helps!

• Computer laptop screen locked after trying to download a free drawing software now can not deactivate or close the screen

  computer laptop screen locked after trying to download free software for drawing fast vector engineer tools and now the break is unable to calculate or close the screen

  Thank you

  Bill

  If your computer is bad, you need to do a system restore. Since it seems that you can not stop, try to hold the power button until it turns off. If this does not work, unplug (if laptop, remove the battery).

  From there on, allows to do a restore:

  1. turn the computer on and start to tap F8 to get the start menu
  2. Select repair your computer
  3. Select System Restore
  4. Follow the prompts

  If the restore point is older, feel free to use the Scan for affected programs feature to make sure that no other programs are affected. Otherwise, I would make a note of it, as it will have to reinstall these programs. In addition, I was running updated Windows once your system working again, since you will most likely use a restore point set up just before an update. (no point in re-opening of a security breach)

• He had to draw iPhone that is already locked

  MY father lost his phone 3 days ago

  I think I need to trace it

  the phone is locked

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• DVD is LOCKED not eject. Help, please. Manual said must contact Sony for assistance with this problem

  My DVD is LOCKED not eject. Tried everything in manual. Child lock is off; Parental control is off... Still refuses to eject the DVD. I'm stuck watching a hangover!

  Hi Lori,

  What is the model number of your DVD player? You can try to reset the device and check if it helps. To reset, turn off the DVD player and unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord into the power outlet, and turn on the player. Try to open the drawer.

  According to the model number of your DVD player, press the POWER + STOP + EJECT buttons. If the drawer still does not open, simultaneously press the EJECTION of DISC1 + STOP buttons.
  NOTE: This step may not apply to all models DISC1 is not available on all DVD players.

  If this does not work and the DVD player of SCREEN and PREV buttons, press and hold the DISPLAY + PREV buttons for two seconds to unlock the drawer.

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• unlock the screen on the cruz android Tablet model. I forgot the model of lock HELP!

  I forgot to lock the screen on the 2.0 cruz android tablet. need help. How to unlock Tablet
   

  Hello, SherryBowen,

  Here's a screen lock example for a Cruz reader model, inviting you to 'model of draw to unlock '.

  The model of lock is a security feature of the operating system of the reader Android 2.0. You can not unlock if you do not know the unlocking scheme or have forgotten.

  By design, this security feature prevents access to your device, and there is no way around it without applying a firmware update.

  Apply the update of the firmware (R100 or T301) will erase the ROM partition and install an original image. This means again to some extent. You will need to reconfigure your e-mail, a Wi - Fi connection, then reinstall your apps, but your app data (eBooks, music, etc.) on the storage of the SD card will not be affected.

  

• Windows 7 screen/internet page frequent lock-up/seizure.

  I got this new laptop Parkard Bell Easy Note about 2 weeks ago and the running version of Windows 7 Home Premium. After I donwloaded some critical updates from Microsoft, my computer has experienced frequent "screen" or "Internet browser" ' Frost/blocking' The mouse does not work and none of the keys worked Windows. I need to turn off the PC and the re - start each time.
  There is also a lot to come back to draw the problem to restore and restore points does not work anyway because of some antivirus checker or setting preventing fill.

  What can I do to stop this common screen lock-up/frozen, please any suggestions? Thanks in advance.

  Ideas:

  • inside of Internet Explorer (66 bit) program, you have problems with
  • No error message
  • Recent changes made to your computer - after about 8 updates form Microsoft
  • What you have already tried to solve the problem - change the mouse setting, tried the troubleshooting...

  Yes, there is a free 90 day trial, Norton installed in the laptop when I got it in mid-November. I removed a few days ago and got a version of track free 30 days 2010.

  Norton applications are notorious for not properly uninstall. You should have downloaded / run the Norton removal tool before installing Norton (360? AntiVirus?) free 30 day trial of 2010.

  Therefore, I suspect that some 2010 Norton free trial of 30 days was NOT correctly and therefore, does not protect your brand new computer. This puts you between a rock and a hard place: If you had bought some Norton 2010, Norton/Symantec probably for free would support, but since this is a free trial version, you are on your own.*

  If you're really lucky, the following may solve your problem. Otherwise, you're looking at a format & clean install of Windows.

  1. uninstall Norton some 2010, LiveUpdate and Add-ons of Norton.

  2. IMPORTANT: Make sure that the Windows Firewall is enabled!

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step _ below!

  3. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  4. close all open applications (that is, anything with an icon on the taskbar).

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. download/install another antivirus of your choice. (You will NOT be able to install another free trial Norton!) I can recommend NOD32, Kaspersky, Avira AntiVir, Avast and Microsoft Security Essentials (the last three are free).

  7. manually & repeatedly update your new antivirus application until you get a prompt "no update more".

  8 restart in Safe Mode and run a full scan of the system with your new antivirus application, then restart in normal mode (Windows) and keep fingers crossed.

  =================
  * If you need further assistance, post it here:

  Norton Community Support Forums
  http://community.Norton.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm just locked me out of my A2017A-H!

  I disabled the auto-rotation because it was getting a bit annoying, and I have a security model. When it is locked, the image of the patron was only 6, instead of nine points, so I was shocked to discover that I'm locked! I tried experiementing but with no luck. Notification Center are not accessible.

  I had the same problem. Here's the trick:

  The bottom line (missing) points is in fact just below the edge of the screen. They are not visible, but they are there.

  Say, for example, your model is the letter 'L' in landscape mode, you would see only the two top left more of two points of the vertical line in the model.

  So, just use the lower edge in the line of the missing points. Draw on the edge of the screen as if it was the line of points. In the example of L, start drawing the L up to hit the edge of the screen, then draw on the bottom of the edge of the screen for the horizontal part.

  Hope that makes sense. Believe me, it works!

• Windows SteadyState and MSE for locked user? Locked user _save files on the desktop? Add the locked user language

  I use Microsoft Windows XP SP3 and Microsoft Security Essentials.

  I did 2 locked users:

  1 locked with custom Restrictions user running Internet Explorer and other Internet browsers, write and draw and nothing much and is welcomed by right clicking on the program icon only run under other Creditentials.

  2 power User, made from MMC with Chater way to have more power that any user who can not only surf the Internet, but also play games online, and this user is also locked.

  My question is: how to make 1. User has locked protected with Microsoft Security Essentials, cause seems MSE is not protect this account, and I can't be sure because of the locked account cannot see even if it is protected, I put MSE on startup but that does not put MSE icon on the taskbar. If it is not protected is not a good cause for the idea that the user navigates Net.

  Another thing I want to do:

  For both locked users able to save files to the desktop and I have it unchecked in Windows SteadyState, but when I connect them and when I log into files are not saved on their desktop computers. So what is the point of selection/deslecting in sign of Restriction if the files went once they logout?

  I wanted to do administrator can retrieve files from their office soon logs in.

  Is - it possible and keep them locked?

  One last thing - since English isn't the only language to be used on 1 locked user account

  How can I put language so that the user can switch between EN and another language

  Thank you for your replies,

  Hi Jade000,

  I recommend you ask your question in the forums of SteadyState for assistance.

  Hope the helps of information.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SONY TV TAV - L1 AND WHEN I TRIED TO EJECT THE DVD SCREEN LOCKED. NOW I'M STUCK FOR THE SAME MOVIE. W

  I HAVE A TV SONY TAV - L1 AND WHEN I TRIED TO EJECT DVD YESTERDAY IT SHOWS LOCKED AND IT WILL NOT EJECT. NOW I'M STUCK FOR THE SAME MOVIE. WHAT CAN I DO? IT IS NOT IN LOCK FOR CHILDREN MODE

  Hello Dimitra,

  I apologize for the inconvenience, it seems that the drawer has been locked inadvertently.  Please perform the following steps to unlock.

  1. press the power button to turn the monitor of the device.

  2 tap the input selection button to select "DVD".

  3. press and hold simultaneously the button stop and eject until 'UNLOCKED' appears on the front panel.

• BlackBerry Z10 locked out of phone, do not accept the password

  Hello everyone

  I have a Z10 kept in a drawer for a long time almost 3 years, I decided to use it again, I forgot the password and ID Blackberry when I can't provide the right cell phone password lock... I would like to know how to get my phone back again...

  I really need some help guys

  Thank you

  Kuronai wrote:

  Hello everyone

  I have a Z10 kept in a drawer for a long time almost 3 years, I decided to use it again, I forgot the password and ID Blackberry when I can't provide the right cell phone password lock... I would like to know how to get my phone back again...

  I really need some help guys

  Thank you

  Hello

  I agree with @JSanders , once it is dry that the BBID is therefore more about Fanta devic, you can start the original game from the phone to the new BBID on it.

  -pretty_krissy

• BlackBerry Smartphones PRIV locked - unable to access with original pattern.

  Hi team,

  I recently bought a Blackberry Priv and installation the Google account on this topic for a few days. Things worked well and have set up a scheme for the phone lock.

  However, one night, the phone rebooted and I am unable to connect to the phone with the boss. I tried to reset the device via the Google Android Device Manager, but it says unable to communicate with the phone. From the looks of it the Priv is not connected to the internet (worked fine before). The phone is now displayed in the model to unlock the screen and so called ' emergency calls' and 'To launch Android, draw your pattern' but I am unable to connect using the previous model, I have set up.

  Please notify. Thank you.

  @louiseS

  If you hold the power followed by typing Reboot. Do not REBOOT on your screen?