lockout admin account?

Similar Questions

• Cisco ACS 5.8 CLI admin account lockout

  Hi all

  We recently deployed device Cisco ACS 3495 and running on a version 5.8.

  Everything seems well while our for the CLI admin account was locked out.

  Found a bug in Cisco for the same problem with version 5.5, but no solution yet...

  ACS 5.5 CLI Admin account locked and no Log Message
  CSCur37203
  Someone out there who might have encountered the same issue and can help advise?
  Thank you and best regards,
  NDA

  Hello

  Unfortunately, the only solution for this is the DVD of password recovery.

  Once fixed, you can increase the car locked out amounted to something greater than the default value of Cisco.

• Blocked admin account.

  I have two accounts on Win 7 OS... an admin account and another is the domain account. In built administrator account is disabled by default. On my admin account, that I gave 3 times the wrong password and it got locked. Is there a way I can open it offline.
  The message that is show is 'the reference account is currently locked and cannot connect '.

  Hi Oberwald

  It was completed last week and so far its only coast... I guess my domain administrator has locked that and the problem is that I don't know him. Y at - it otherwise that communicating with him to unlock the account. Thank you!!

  If your domain administrator cannot be contacted, then practice common is to escalate the problem through your manager.

  If there is a lockout time-based, so you can move it as follows:

  1. Start the machine mode of the BIOS Setup.
  2. Change the date of a year in the future.
  3. Unplug the network cable.
  4. Reset.
  5. Log in under your local administrator account.
  6. Create the spare account that I mentioned earlier.
  7. Reconnect the network cable, reset date, log in normally.

• Admin account went

  Hello

  I have an iMac 27 inches and for the last week has had problems with everything works really slow. I bought the clean my Mac 3 software and it at the start of the performance. A few days later my computer on from without my help.

  When I turned on the computer back, I don't the option connect to my Admin account, although I could still see my background image was still there. The only option was to connect as a guest.

  I looked on the forums for help and her I made this following without result.

  Entered my Admin user name with password and it did not work. I then reinstalled Safari and nothing has changed. I looked again on the forums and tried to launch the Terminal and typed in 1 s/users and the response has been - command not found.

  All my programs are always present, but I still have no option to log in as administrator. I was going to update to OS X El Capitan version 10.11.6 Sierra, but without an Admin Im unable to do.

  Any help would be appreciated.

  See you soon

  I bought the clean my Mac 3 software...

  'Cleaning' apps are scams. Extract of effective defenses against software malware and other threats:

  • Never install a product that claims to 'clean up', 'speed', 'optimize', 'boost' or 'speed up' your Mac; to "wash", "tune" or to make it "brilliant". These allegations are absurd.
    • These products are marketed very aggressively. They are all scams.
    • They usually operate on the erroneous premise that Mac builds 'junk' that must be systematically 'cleaned' for optimum performance.
    • Trial versions of these programs are successful because they provide more instant gratification of free space on the disk.
    • This increased space is the result of irreversible destruction of files, programs or operating system components normally protected against accidental tampering or removal. The eventual result will be the reliable operation, poor performance and random crashes that may not become evident for months, or even years after their use, when updates of programs or OS X are finally released.
    • Memory "cleaners" that bypass the work of OS x memory management algorithms by purging the memory contents inactive for mass storage, which can only result in performance degradation and accelerated the hardware failure.

  To remove 3 CleanMyMac itself, use its Uninstall module, followed the following additional steps:

  • Delete the file ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

    • To access this file, copy and Paste the following line in the menu to go to Finder > go to folder...

  ~/Library/LaunchAgents/

  • Locate the following file and drag it to the Trash:

  com.macpaw.CleanMyMac3.Scheduler.plist

  • Then, open  (menu Apple) > System Preferences > users and groups > login items.
  • Select the item of Menu of CleanMyMac3
  • Click on the [-] (button less).
  • Restart your Mac.

  Beware that reinstall OS X has no effect on deletion CleanMyMac or reverse the damage, it is able to inflict on a system. To recover from the effects of using it to change the OS X / Sierra, you need additional software and essential files you need, follow the applicable recovery procedure below:

  • If you have a backup that you created before using CleanMyMac, now is the time to use it. For Time Machine, start macOS Recoveryand in the form of Mac OS X utilities , select restore from a Time Machine backup. Choose a date prior to the installation of CleanMyMac.
  • If you don't have a backup previous use of CleanMyMac, create one now. To do this read to use Time Machine to back up or restore your Mac.
    • The recovery procedure require that you erase the Mac using OS X Recovery, and then create a new user account whose content will be empty. You can then use Setup Assistant to migrate your essential documents, including photos, music, products of work and other essential files.
    • To erase and install OS X read How to reinstall Mac OS on your Mac.
      • Follow step 2 to completely erase the internal memory of the CMA: delete a volume using disk utility.
      • Then follow the procedure to move your content to a new Mac.
      • When asked how you want to transfer your data, select transfer from a Mac, Time Machine backup or boot disk.
      • Under Select the information to transfer, select only your old user account and do not select 'Applications', 'Computer and Network Settings' or 'other files and folders. Deselect these choices.
    • After using Setup Assistant, you will need to reinstall the essential software that you might need, once more without forgetting to install the software from their original sources and by omitting all non-essential software.
    • "Non-essential software" is a broad category that includes, but is not limited to the products 'antivirus' third party 'cleaning' and 'maintenance '.

• Siri is disabled by the Parental control on macOS Sierra admin account

  I just installed macOS Sierra today on my 13 "Mac Book Pro (early 2011). I have only one user account that is an administrator account. Siri is not enabled on my machine. When I go to the Siri system preferences screen, it says that "Siri is disabled by Parental control. Hmmm, when I check the Parental control screen, it says "you logged in using an administrator account." You can only apply parental controls to accounts that are not administrator accounts. »

  What happens here?

  Same problem here. Updated for Sierra of El Capitan on MacBookPro 15 "(mid - 2014).

  Even if I toggle the checkbox on the Parental control > others > disable Siri & dictation I can't activate Siri, the checkox is always gray and the alert says "Siri is disabled by Parental control.

  Siri is enabled if I login as a burst, but I need it on my Admin account of course. Very annoying.

  

• How to remove an additional admin account and keep the one I want

  Recently bought a new iMac, I used the wizard to merge. She added a new my old mac admin account. Now I have two admin accounts.

  I want to use the old Mac that has been transferred through and get rid of the other.

  I'm going to SysPrefs/users / groups, unlock, but the-(minus) is grey and the other admin is grey too.

  What to do what to do.

  You can't delete an account once logged in it. You must log on to the account that you want to keep. Then go to users and groups, open the pane, select the account to be deleted and click the sign less.

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• 'Creative cloud' is working on a new admin account but not not in old account admin

  Hey community,.

  As my "Adobe Creative Cloud" was no longer working (not able to connect) on my old admin account.

  Adobe told me to create a new admin on 'El Capitan' account.

  Working on the new creative cloud account.

  (Adobe told me that there is a configuration problem on the old account)

  I would like to know

  • How can I detect what's the difference in configuration between the two account?
    or
  • How can I migrate all the settings and my old account to the new facilities?

  Purpose:
  I have a different software on my old account that I use for my work; VMware Fusion 8, different browsers, printer software, tools etc.)

  And also the settings...

  (I obviously don't want to use my old account for everything and have to switch to the new account just for the creative cloud...)

  Plan:

  I can either migrate all the settings from the old account to the new or detect the problem in configuration in my old account.

  Kind regards

  Adobe Creative Cloud ran after the new update of El Capitan.

• Admin account happened after installing the netgear Equium pc wireless card

  I bought a netgear pc wireless card that I was assured was compatible with XP. After installation, I got to start where the Welcome screen had gone and I have a black screen with a newspaper box in details request.

  As an administrator, I connected only to be told that I have no right of administration. I can only connect my using my account limited son. There is no account of the administration at all, I can not access my files or access the administration account not yet a guest account.

  Only a limited account is shown.

  Desperateto back in the system to remove the software, but this without icannot rights. admin tried pressing f8 safe mode, but it doesn't not work can not enter in save mode... on f12/f2 are leaving upwards. Tried to hide the password help... will not accept any of my contact information to
  all the

  Any help... Please

  Hello

  seems really strange, especially after the installation of a pc wireless card software. I can give you a suggestion:

  EVERYTHING YOU DATA BACK UP AND REINSTALL YOUR OPERATING SYSTEM.

  I think that it is the only way, because when you describe you already tried almost every thing, then a recovery is inevitable. Copy/backup your data and put the new OS on the HARD drive.

  After that, make separate accounts (for example 3 accounts) and install the card netgear with the admin account. It should work.
  Would appreciate some comments.

  Welcome them

• Place the Parental control over the Admin account

  I use a Macbook Pro with El Capitan 11.1 2012

  Today, I put Parental controls on my admin account, which resulted in the managed account. I can now use my normal administrator username / combo of password to remove it. I tried everything I found on the Internet, including into single user mode and create a new account to change to leave, but the code didn't work in my case.

  I was wondering if there is any easy solution or new thoughts there for this OS...

  Also why it not easier? Or at least a warning? Looks like Apple could have come up with something after that it was produced for the years.

  Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.

  If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.

  Step 1

  Start in recovery mode. The OS X Utilities appears.

  Step 2

  This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Step 3

  Select

  Utilities ▹ Terminal

  in the menu bar. In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option

  Select the user account

  and select

  Administrator (root)

  Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.

  Select

   ▹ Reboot...

  in the menu bar.

  Step 4

  This step, as step 2, applies only if you use FileVault. Sign up as usual, then select

   ▹ Disconnect...

  from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.

  Step 5

  On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.

  Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked

  Allow the user to administer this computer

  You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.

  Step 6 (optional, but recommended)

  Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.

  Credit for this idea of NCP member wessongroup.

• Remove the admin account el capitan

  I want to delete a temporary admin account I created to solve a security issue on my main admin account. In short, I want to delete one of the two accounts of user admin my operating system is the latest version of El Capitan.

  Unlock the security for the users and groups pane, select the temporary account and click on the sign less at the bottom of the window to remove it.

• FS2004 unrecognized admin account

  Hi, I played flight sim 2004 on my pc windows 7 for the last six months. Yesterday I put the disc 4 of to start playing the game and an error message appears saying that I need an admin account. The account I use is an admin account, I tried to reduce the level of the UAC, but it still does not work. Any ideas please?

  Kind regards

  Chris.

  Hi guenoun, just for you to know that I just try the Flight Simulator again this morning and it works. There was an update yesterday from microsoft, I don't know if it was something to do with my problem, but if it was thank you Microsoft. Best regards, Chris.

• serious problems Server 2003 admin account is disabled

  Hello

  We have Server 2003 it is online, everyone is our floor works in this field, he had a 2 admin account, 2 admin accounts has been locked.

  We have only a user account assigned to the user group policy is not anything, drive c, it is limited

  help me its urgent

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• XP admin account is hidden and in safe mode F8 annoys me but I cannot view the admin account.

  The admin account is hidden and it seems as my user account, but what built allowed me to install the drivers it isn't now.  Impossible to install a wireless card to get on the web.
  I followed the previous advice and used the SafeMode (F8) and got to the login screen, but my account does not allow me to view the account Admin don't want to rebuild again if I can avoid it. Any advice would be very welcome.
  Edit the registry key doesn't help either not that my account has no rights to add a key
  Thank you

  According to Microsoft: "This isn't a problem... it's a feature"...

  The normal behavior for Windows XP is to hide the built-in Administrator account once another user account is created.  Not rebuild your machine again because it happen.  One way around this problem is to create another administrator-capable user as an unprivileged user.  Then, when the account is not built-in Administrator, you will have a visible connection as admin user.

  As it is now, your solution is simple.  On the normal startup login screen, hit twice by the Ctrl-Alt-Delete key combination.  This will bring up a login screen standard where you can enter the user name and password (if any) of the built-in Administrator and you connect to your computer to a normal startup mode and make the changes you want.  (I recommend that you create a 2nd Admin user with the control panel of users)

  HTH,

  JW

• OfficeJet Pro 8610: Lockout admin functions

  I managed to me lockout admin on my Officejet Pro 8610. Could someone help me to reset the name of user and password, or return to the settings by default so that I can take back control of my printer?

  Thank you.

  Best regards
  FlyingHorse

  Product name: HP ENVY dv7-7233nr Notebook PC
  Product number: C2N68UA #ABA

  Hello @FlyingHorse,

  Thanks for posting in the Forum from HP Support.

  I see that you need a reset manual full semi * for your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.

  Check your Inbox - I'll message you private information you must regain control admin your 8610. * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information on custom addresses ePrint, click here.

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Have a great day!