Logic 10.2.1 very slow to load aus with yosemite

Similar Questions

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• PS CC 2014 very slow to load and function after update 2014.2

  I've updated my Photoshop CC 2014 64-bit today.  It worked perfectly until the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I uninstalled used PS PS cleaner and reinstalled via the CC Office.  The problem of the speed remains.  Interestingly, the 3D is the functions Menu which seems to take longer to load.  In other words, see the program load, possibly, but 3D 6 or 7 seconds later.  I don't know if it's important.  The installation worked fine the update.

  Grateful for any ideas on what could be the problem and what I can do about it.

  My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card.  I use the latest version of the driver from the Nvidia website.  OS is Windows 7 64 bit.

  I get no error message - slow all just great.

  Thank you.

  Right.  I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file.   It seems the problem of lag with CC2014.2.

  You can find it here:

  http://USA.Kaspersky.com/downloads/software-upgrades/

• my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

  HY sorry my bad English...

  I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

  Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

  measures have I made:

  -change the hard drive

  -change the disk sata hard

  -battery change

  -change the trackpad and trackpad cable

  -change the OS 10.6, 10.7 10.10, 10.11

  -change model point via

  and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

  is there a solution that is more useful? very confused i

  0o0o

  If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

• Very slow Firefox loading pages

  So many pages are really slow loading as minute, as Courier hot.EE youtube and many more. It started to happen when I updated to 20.0. Looked up a few suggestions and found that everything: config network.http.keep - alive using fake. And so I did and it worked, but the next time I opened firefox again, that it was slow to load again, but persistent is always false, all non disabled necessary plugins and extensions and I don't seem to find a solution. Been a user of firefox for a long time and do not want to change my browser.

  The new profile seems to work very well - don't know for how long, but we'll see how that goes.

• Very slow to load data tab

  Version: 1.5.4 develop HAND-5940
  
  If I click on the tab "Data" in a table with a large amount of documents (500,000) hangs SQL Developer for nearly a minute until loading records. It works very well on the tables with relatively few records. I tested on another machine in the office, and the 'Data' column opens fine on any table regardless of their size.
  
  Is there a way to limit the number of records returned another by setting the 'Sql Array Fetch size' to 50 as this seems to be the cause of the problem?
  
  There is an environment variable that replaces the 50 record limit?

  The only causes of slow response times I can think of are:
  1 LOB inside your table
  2 busy DB or network
  3 sort or filter

  The extraction of 50 size is so small, that it is almost impossible to cause you problems you describe.
  My guess is you have a (hidden) sort, so check your sorting dialog box...

  Hope that helps,
  K.

  PS: Due to a bug in long term, you cannot change the size of the extraction anyway...

• Satellite L850 1LK very slow to load images

  Ive had this machine for almost 3 years, it was fine for the first two, but now that it does become a chore.
  I only really ever use it to surf the internet and upload pictures and its main problem is the use of the internet.
  Images and web pages are extremely slow to load even on a good fast wired connection. Ive had the computer restored by a local store who claimed they reset the map graphic, but in reality they probably just restored to the factory under the toshiba bloatware.
  It worked fine for 2 days, then became slow again, im glad this is not a virus or malware related problem.
  Just wondering realistic if we can do something with it, or is it better to forget everything and move on to something new.
  Its been updated level to windows 10, but the problem existed on 8 too.
  Thanks in advance.

  Try an update of Windows to reinstall Windows.
  Pilots precedents or browser plugins can be the cause of the problem

• VERY slow to load-Forum

  Is anyone having problems with this forum being slow to load pages? Yesterday and today, it was EXTREMELY, OUTRAGEOUSLY slow. Nothing else seems to be, but I don't know if it's me or the site... I'm just the developer report working in detriment IT... you kind of network are wizards. Thanks to relieve my frustration of let me know one way or another.

  I have not noticed anything today, works perfectly.

• Very slow / freeze while working with photos in Photoshop Elements and Canon DPP

  Suddenly my Windows XP has become very slow or crashes when working with photos.  I have Canon DPP and Photoshop Elements installed, and in the two following occurs: I can edit a photo without any problem but when I try to work with a second picture the system slows down / freezes.  It unlocks after a minute or two each time.  I tried cleaners registry check disk, Disk Defragmenter, virus, etc. etc. scans and no problems.  All other works very well and this problem started just out of nowhere.  Any suggestions or ideas will be greatly appreciated.

  Thanks John.  How do I disconnect from the internet?  I have a cable modem.

  ====================================
  I also have a cable modem and it has a button on top
  who's going to turn off/turn on the connection.

  If your modem does not have the button... you can
  Click on the "connecting to LAN" connection in the notification
  area of your taskbar and select Disable.

  If you go to... Control Panel / network connections you
  right click on the connection to the Local network and send a shortcut
  on your desktop. So, it is more convenient to right click...
  enable / disable...

  Good luck... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Very slow Windows Vista desktop with optical fiber connection.

  Since we moved and got a fiber optic connection, my computer is very slow.  We have laptops in the House on windows xp and wireless connections that are not having problems with speed.  My computer is directly connected to the modem.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Pages VERY slow to load from Firefox 6.0 download. How difficult or reinstall the old version please!

  As I downloaded the latest version - Firefox 6.0, I have some serious slow loading of the page. Nothing has changed in my PC or network configuration and in the past had a very fast loading everything, even the streaming of videos, etc.. The only thing I found in your help on pages loading slowly, it was something about a proxy Add ons question - but I have just activated. It seems to be worse when I submit a form-

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.