Logic 9 - event editor - midi ch

Similar Questions

• How to replace the logic board MacBook Pro mid-2010

  I have a MacBook Pro 13-inch mid-2010. About once a week, monitors (one who is part of the laptop) and an external will turn grey and freeze. When I turned off the computer, it brings back me to the login screen (I'm under 10.11.5), but I can't move the pointer (whether with my Apple Wireless Mouse or trackpad) to select the icon for my login. After a few reboots, the computer takes care of the password reset function. And there, I can reuse the mouse, select Restart the machine, and I'm back on my way.

  The genius of Apple and I suspect that the problem is with the logic board. Unfortunately, Apple has more parts for MacBook Pro mid-2010. I contacted a few service centers certified Apple the kind told me; None of them can help either.

  Any suggestions for how I have a fix for this problem? Thank you!

  You could contact a specialist to see what their requirement is to send you the

  computer while for a diagnosis appropriate; a specialist is the one who can do all the

  works internally and could actually fix the edge logic that the Mac came with.

  I know some who do this; they charge more than a parts Exchange hosting.

  You can see what a company such as wegenermedia can do. Or see what the

  iFixit guide for Mac (for your specific model) said repair and watch to see who

  part numbers are involved in replacement of the like-kind in refurbished or tested

  OK, from sources such as powerbookmedic.com and other sources used parts.

  The logic board may not be a problem; might be some on the Board of directors or of one which

  attached to, such as the graphics processor. These older models are not

  so difficult for a specialist expert set. While the Mac is able to do so, is a good time

  for they provide labour expertise to swap upgrade replacement parts.

  They can test the feature set and should provide a guarantee for employment.

  Some of these companies repairs also restored the supply of older computers they fixed.

  Good luck & happy computing!

• How to stop the logic to use the midi ports

  Every afternoon.

  I use the controller kernel SSL, I configured it to use Cubase, Logic, and Studio one.  When I load logic, she keep trying to load all 6 midi ports IP with controllers instead of just he port 1 and 2 is assigned to the logic of the remote SSL software.  Is anyway to prevent the loading of logical port 3 to 6?

  Thank you

  I assume you mean a control surface, which logic detects and installs automatically.

  Go into the control Surface Setup window (Logic Pro X ➤ govern ➤ Setup...), select your controller and things in the pop-up menu 'modify ➤ remove '.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Logic pro exporting is not midi

  I recently changed my Logic Pro X and can't find a way to export midi. The resulting files are empty.

  I read the docs and see that this is the same process as Logic Pro 9: select midi regions > export > selection as a MIDI file

  Someone at - it ideas?

  To keep track, it only applies to some Logic files - other travel very well.

• How to disable the MIDI to the logic of just my USB key

  Question: Where exactly should I do to disable the MIDI to the logic of just my USB key (I am sending them to another application and do not want it also picked up in L, but don't want any logical MIDI stop). And where does logic to send any MIDI out? I looked at all the prefs I can find, watched dozens of links tuts and docs online, nothing... It's so easy live, sigh!

  TIA!

  Open the environment window

  go to the clicks and ports

  look out on the physical input and find your usb device

  New-> monitor (create this object)

  pull a cable from your usb device on the physical input to the monitor

  That's all

  When you want to run into logic once again simply remove the cable

  get that to work first, then we can discuss outings

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• Transform midi logical crash 10.2.1

  Hello!

  In the logic 10.2.1 Midi transform window crash the app in the Yosemite and El Capitan.

  I tried on 2 computers, MacBook Pro (with El Capitan) and Macmini (with Yosemite)

  Is a bug?

  My transformation window has disappeared from the 'window' - tab. Can be accessed only via the "Piano Roll" - window: functions > MIDI transform.

  There are several errors of MIDI with this update. My M-Audio oxygen 49 has stopped working after update. Works perfectly in MainStage3 and GarageBand and Logic Pro X receives no signals, with one exception: when the message "Changed number of input/output MIDI. 1 input and 1 output there are"watch after you connect the USB, if I push the logical message will read what I play. But the second I press "OK" on this message, the connection is closed.

  Hope someone can help us. Good luck!

• Midi recording track to midi track

  How I have implemented logic to read a midi track, for example with an arpeggio on it and have it save on another track in 10.2.1? It seems that some things were moved since I finally did.

  There are a few ways to do this, but the way most free is with a plug-in called noon freeze found here.

  http://www.audiocr.com/MIDI-FX-freeze/

  You insert the plugin as the last effect in the FX slot and select record. Then recording in logic and everything that is processed on the channel strip is read by the plugin and registered as you just drag the region saved on a new track with all the FX post processed effects recorded.  Very cool.

• MIDI track is recording not read correctly

  When I save a midi track and it reproduce he never sounds like he did when I recorded on the keyboard. The joints do not remain. Why is this? I even ran the through bus midi instruments to record audio and the audio kept my joints, but sloppy midi sounds. Can someone please help me find a solution?

  Thank you

  My guess is that your with a logic auto quantize your MIDI recordings and you don't work at the tempo that has the logical value... You can disable it in the window Inspector of UNMARKING all REGIONS so that it indicates MIDI THRU the top of the Inspector and by unchecking the checkbox quantize.

• 10.2.4 came out

  Logic Pro X v10.2.4 was released this morning with bug fixes...

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

  The official release notes

  Logic Pro release notes X 10.2 - Apple Support

  Stability and reliability

  Logic Pro X is more unexpected:

  • Sometimes when you open or create a project.
  • Sometimes, when picking an icon for a cell of Drum Machine Designer.
  • What a bunch of rubber by selecting a group of notes in the Piano Roll immediately after changing the screen fixed.
  • During the initialization of a Mackie control surface TODAY connected.
  • When the currently active audio device is disconnected and then reconnected.
  • When you choose Import Audio in a pop-up menu of SOURCES of Alchemy.
  • When you use a pop-up menu of SOURCES of Alchemy to import audio data on a system including a mounted volume, which the name starts with a 2-byte Unicode character.
  • When a file whose name contains a 2-byte characters is slipped on the button or when the Match EQ plugin reference.

  Performance

  • Open extended retro synth settings in OS X Yosemite is no longer sometimes triggers an internal error alert.
  • It's more a glitch at the beginning of a cycle area to jump when the pre-Processing Cycle is activated.
  • Quantification of the notes in a software Instrument during playback track is no longer sometimes cause audio dropouts.
  • Browsing the Alchemy presets no longer causes the use of the memory of Logic Pro to increase unexpectedly.
  • Alchemy causes more Logic Pro use memory to suddenly increase when walk if the samples using the left/right buttons.

  Edition

  • Shift-click to select noncontiguous notes in the Piano Roll editor we can once more.
  • By pressing Option + shift all by adjusting the slider of Piano Roll speed still affect all notes at the same speed as expected.
  • It is once again possible to use the pointer to elastic select MIDI draw points that have been created with a setting of all MIDI channels.
  • It is possible to inadvertently set the duration of a score from 0 compared to the event editor or publisher of the step.

  Mixer

  • Resolves a rare automation associated problem that could cause a sending bridged on a muted Channel Strip to stay active.
  • Duplicate a now reliable track duplicates all values of parameter of plugin.
  • Click Cancel in the dialog box displayed when you delete a into the Blender is more assigned to a track removes the auxiliary voltage
  • Solo now works on channels routed to the outputs mono more than exit 1 or 2.
  • Solo of a bunch of forwarded to one mono channel output is more unexpected puts the right output muted.
  • Solo of a power greater than 1-2 cup now exit 1-2 as expected.
  • Duplicate a track now also reproduces all its track notes.

  Accessibility

  • VoiceOver announcement new correctly selected regions.

  Plug-Ins

  • Audio is now routed correctly instruments Audio Unit of MULTISORTIE in projects saved in previous versions of Logic Pro X.
  • Importing in Ultrabeat drum kits, the Kit to import name is again properly.
  • Instances of the plug-in with a rate fixed at a value of Hz Tremolo are reset is more to 32 bars during the loading of the project.

  General

  • Join the audio regions in the Low Latency mode is more sometimes leads to the new area being moved to an incorrect position.
  • If the toolbar button replace comes as the project settings > recording window is open, all parameters of duplication of records now switch to toggle to replace.
  • AutoPunch track MIDI recording now behaves as expected when recording > records of MIDI overlapping > replace is enabled.
  • Manually punching in and out mode replace now works correctly with the regions of the South.
  • During recording MIDI mode replace with Cycle active, playing the afternoon before the start of the Cycle no longer causes the measure before the start of the Cycle must be replaced.
  • Drag a file from Apple Loops loops in a track with a custom name is no longer renames the track.
  • It is once again possible to assign a custom command button to throw a last record and return to the command of the last Position to play.
  • Editing notes in the notebook of Blender is no longer sometimes causes fonts custom reset or text to be reproduced in an unexpected way.
  • Text pasted into an existing note now correctly takes on the color of the text and does not cause the existing text replaced the default color.
  • It is once again possible to rename files and regions in Explorer project files using a command key. The command key is now assignable and is called 'Rename '.
  • It is once again possible to enter text in the cell name in the object of several Instrument in the environment window.
  • It is still possible extend audio beyond the current visible area in the impulse response utility.

• facilitate the identification of messages random plugin

  Right, so I find myself here often enough, and how I progress is painful and long process and I'm sure there must be another way.

  So I have a plugin that does not midi learn. I have a little. I also have an Akai MPK mini, and assign a hardware controller button to a plugin parameter.

  But I don't know the CC of the parameter number.

  What is the best way to find out?

  Research on the web is the dark and away from this project.

  Currently I use the touch to write a bit of this parameter on a track, but then event editor just told me his name and not the number CC.

  I am moving back to logic after some respite and don't really remember how I did it.

  

  I will create a load of objects for each locking connector environment in finally and move the entry through that during use of the plugin, so I don't have to mess with my Akai settings too...

  Thanks for reading, hope you understand and you can help!

  Open environment and the output of the channel strip, the plugin is on a cable monitor object.

  Then put the buttons of your plugin, and you'll see the fader messages generated by the button.

  

• Automation of data not in Piano roll - Please Help

  I was wondering if someone could kindly help please

  I use an external controller on a keyboard to change things like cut wide in the ES2 when you use a synth.

  After the change in writing Automation data appears in the area of popular songs, but I can't understand how to do so that he can show below the events of midi notes in the piano roll editor and allow me to also change it. I can always change the same midi control function (like cutting) and he appears in the form of empty data not what I recorded and any change overrides greater automation in terms of titles.

  Is there a way to show the recorded data automation in the piano roll allowing me also change please?

  Thanks for any help

  Use the region based instead of track based automation...

  Click on the image if you don't see it animated...

  

• Roland SPD-S and noon update - HARD!

  OK, here's one for the smarter guy or girl out there. Quite literally.

  I received a Roland SPD-S battery.

  Problem is, he needs to update to version 1.2, so it may take a modern map of compact flash.

  There is literally no old cards compact flash out there. So I need to upgrade to version 1.2

  As you do, according to Roland, is to download a file containing the SMF Midi 16 files and send them to the battery.

  Here are the instructions from Roland:

  ***************

  You will need

   SPD-S update files downloaded to your computer. (MAC or PC)  USB converter MIDI and a MIDI cable.
   Sequencer software able to read MIDI files Standard

  Update procedure

  Connect terminal MIDI Out of the sequencer to the MIDI In of the SPD-S.

  While holding down the [WAVE] and [ENTER] buttons light up aware of the SPD-S.

  When MIDI UPDATER will appear on the display, press [SETUP] and [EDIT] at the same time.

  When "Please SEND" appears on the display, to each SMF file in numerical order. The SPD-S display must indicate the receipt of data.

  After all files are sent, "UPDATE COMPLETE" appears on the screen. Turn the unit off, and then again to resume normal operation.

  ***************

  So I easily move on to the final part where the Roland SPD - S bed "send."

  So here's the question. How the hell is a send these Midi files of logic for the SPD-S?

  I have a fast track of Motu Midi usb converter and its Apogee Duet card and cables needed.

  I know it's a toughie, but I don't know that some brain there has a simple answer!

  Please do not hesitate to walk me through it like a fool, including which midi and usb cable to put where.

  Useful links below to Roland and my Midi interface.

  Thank you very much

  Gavin

  Update 1.2 Roland SPD-s

  http://Roland.com/support/article/?q=downloads & p = % 2DS SPD & ID = 8201144

  Motu Fastlane USB:

  http://www.motu.com/products/MIDI/fastlane_usb

  Open logic

  Go to MIDI preferences turn off reset selected messages... (they may interfere) Write them selected.

  Adjust the tempo of the song to 60

  Load all logic, (16 tracks separated from MIDI) MIDI files set each MIDI track MIDI channels the channel required, probably 1, Roland documentation should say. CUT all MIDI tracks.

  Reactivate the first track/file and press play, cut the first piece reactivate follow the second file, press play... etc... etc.

  OR... to load all the MIDI files on a single track separated by a bar and press play. Make sure that the tempo is between 60-75.

• I understand the code, but I feel lost in AS3

  OK guys so first sorry for the display of this message which is not really RELEVANT in coding or something but I need your help.

  I'm learning AS 3 with Adobe flash CS6 and I was home for a week, but I tried before FlashDevellop.

  My problem is that I'm COMPLETELY lost. I understand some code (variables, table, conditionnals, logical operators, event handling in some measure etc...) and I literally (yes I did) followed EACH tutorial that was the later page of google for searches like "How to code in AS3 for flash CS6" or things like that. But I feel lost.

  Tutorials you will say to use images and don't even speak of classes, like everything that could be done with only images on the timeline and the code in frames. Others don't even talk about classes and tell you what can be done with the code in an image

  What I'm trying to say is that: making games seems really fun and coding doesn't seem THAT hard (I just search for name of functions or events on the web when I'm not sure because I just started)

  But sometimes I don't understand what I got wrong, or what I would do indeed at any given time. What should I use, and well yes I have no idea.

  I'm doing a bit of flash game as Elona Shooter (http://www.kongregate.com/fr/games/noanoa/elona-shooter), but more simple than this ofc. Just a basic for my first.

  I would say a little bit more like this: http://armorgames.com/play/4964/

  But Idk, at first I thought that I could do with the little knowledge that I have and the internet, but I messed up with my classes, there are some things that I have no idea how do.

  Like adding noise, I really know how to do with images, but I don't know how using classes, and I started to make the game with only the classes so should I switch to the framework? Or I can use both?

  If you have a GOOD tutorial, as one who not only explains the code but how it ALL works, it would be SO great love.

  Once again sorry to post this text disorganized. It's just that I don't know if it's just me having a lot of trouble with such a simple coding language, or if there is really a lot of things to consider.

  Thank you very much for reading if you did haha, and you have an answer, please share .

  There are many things to take into account.  I don't think it's a matter of AS3 being a simple coding language... the simplicity of coding/languages are compared to the experience of the user... for some, it might come easy, now, but it didn't come without a lot of the suffering that you seem to be enduring.  You seem to actually like you are coming along very well.

  I doubt that it is a tutorial all encompassing fact to satisfy your request.  Most of the tutorial topics will focus on specific aspects.  If you want to learn how to work with sound in form of code, then look in the tutorials for the Sound class... search Google using 'His tutorial AS3' and I bet that there will be a lot of short and sweet lessons available for you to work through and draw lessons.

• ItemEditor activate issue

  I have an itemEditor which stretches from TextInput. It works as expected until I enter a zero in the editor. After that, I can't the editor "activate" again. I have tracing at the beginning of the manufacturer instructions and service data set. Nothing is displayed once the zero is entered. I can't tab in the field or click inside either.
  
  Has anyone seen this type of behavior before?

  Well, you're right. The example I came with was simpler that the component of the common but still too complex to post. However, I managed to solve the problem, although I don't know what a change makes a big difference. For the love of someone else that may have a similar problem, I'll post my changes that I made.

  I have two custom converters and editors for several of the columns of a grid. All were written in AS and extended TextInput. I don't know where I got my idea out of how they should be written, but I think it's somewhere in the Adobe Developer's Guide. In any case, here's a sample converter, then editor with comments on what has been added and which has been deleted. Hope this helps someone else.

  overridden render data
  override public function set data(value: Object): void {}
  Your parameter data with the actual value of the field. Changed to set the value of the line
  Super.Data = OrderItem (value) .amountOrdered; * DELETED
  Super.Data = OrderItem (value); * ADDED
  Text = String (OrderItem (value) .amountOrdered);
  Used the invalidatedDisplayList earlier, but changed to displayEvent
  super.invalidateDisplayList (); * DELETED
  dispatchEvent (new FlexEvent (FlexEvent.DATA_CHANGE)); * ADDED
  }

  alternate data Publisher
  ... (same app specific stuff)
  Super.Data = value; * DELETED. I put no longer data
  super.invalidateDisplayList (); * DELETED. Use the dispatchEvent rather
  dispatchEvent (new FlexEvent (FlexEvent.DATA_CHANGE)); * ADDED

  Change events editor also used to define a listener to changes in the data constructor and handle it self. This was also replaced.