Logic combination

Similar Questions

• VMS within vApps

  We are looking in vSphere and I'm a little confused on the creation of vApps.  I see that vApps can create one or more virtual machines that are associated with this application, but it is not clear if all these virtual machines get logically combined into a single object.

  For example, that we have an application that has redundant web and app server VM (DB is physical) and we want to make sure that the two web and two app server VMs are on different ESX hosts through affinity of DRS rules.

  Is it still possible via a paralytic or the entire TIME runs on a single server and have redundant servers inside the vApp doesn't make much sense?

  Thank you

  Joe

  Hello and welcome to the forums.

  We are looking in vSphere and I'm a little confused on the creation of vApps.  I see that vApps can create one or more virtual machines that are associated with this application, but it is not clear if all these virtual machines get logically combined into a single object.

  Yes, the paralytic is an object that will appear in your inventory of registrations.  You can expand to see the virtual machines it contains.

  For example, that we have an application that has redundant web and app server VM (DB is physical) and we want to make sure that both web and two

  App server virtual computers are installed on different ESX hosts through affinity of DRS rules.

  Is it still possible via a paralytic or the entire TIME runs on a single server and have redundant servers inside the vApp doesn't make much sense?

  Yes, it is always possible.  The virtual machines in the VAPP can cover multiple ESX hosts, have their own rules of affinity, etc.  Its another way to organize or manage a group of machines or a way to get more flexibility, not take away.

  Good luck!

• Merge two blades as a

  Hello

  Is it possible to install two blades individual dual quad core (with 64 GB of physical RAM on each server) as a single logical unit. I have a DB server that needs due to physics and 128 GB of RAM does not able to do or there at - it another way to go about this?

  It is a question for your supplier of blade material, unless you speak more to logically combining them into ESX so that a VM can use the resources of the two hosts at the same time? If this is your question, no, it is not possible.

  The blades that I have worked in the past also would you cannot merge the two blades in one, but again check with your provider in case there is something out there that allows for this.

• SQL query according to shore

  All,
  
  I have the task 3A, B and C, each task have different coastal
  Task has higer priority task and then B, then c. task
  
  Scenario #1:
  ClientID - tNom - sdate - edate
  -100a - 20 Jan 11-22 Jan 11
  100 - B - 22 Jan 11 - null value
  
  in this task has a higer priority then the task B, so the result should be:
  -100a - 20 Jan 11 - null
  
  Scenario #2:
  ClientID - tNom - sdate - edate
  200 - a - 25 Jan 11-25 Jan 11
  200 - B - Jan 25, 11-25 Jan 11
  200 - C - 25 Jan 11 - null
  
  in this scenario, all tasks start and end the same day, so the final result should be:
  200 - a - 25 Jan 11-25 Jan 11
  200 - B - Jan 25, 11-25 Jan 11
  200 - C - 25 Jan 11 - null
  
  Scenario No. 3:
  ClientID - tNom - sdate - edate
  400 C - 1 Mar Mar 11-6 11
  -400 B - 6 Mar 11 - null
  
  in this scenario, task B has a right-of-way higer then task C, result should be:
  -400 B - 6 Mar 11 - null
  
  SQL for all scenarios: Pls help to do it by means of sql or a procedure or a function.
  
  WITH task_dtl AS
  (SELECT 100 client_id, 'A' tname, to_date('20/1/2011','DD/MM/YYYY') stdate, to_date('22/1/2011','DD/MM/YYYY') edate OF DOUBLE UNION ALL
  SELECT tNom 100, 'B', to_date As (' 1/22/2011 ',' DD/MM/YYYY'), NULL edate OF DOUBLE UNION ALL
  SELECT 200, 'A' tname, to_date('25/1/2011','DD/MM/YYYY') stdate, to_date('25/1/2011','DD/MM/YYYY') edate OF DOUBLE UNION ALL
  SELECT 200, 'B' tname, to_date('25/1/2011','DD/MM/YYYY'), to_date('25/1/2011','DD/MM/YYYY') etdate OF DOUBLE UNION ALL
  SELECT 200 'C' tNom, to_date (January 25, 2011 ',' DD/MM/YYYY ') As, NULL edate OF DOUBLE UNION ALL
  SELECT 300, 'A' tname, to_date As (' 2/20/2011 ',' DD/MM/YYYY'), NULL edate OF DOUBLE UNION ALL
  SELECT 400, 'C' tname, to_date('1/3/2011','DD/MM/YYYY') stdate, to_date('6/3/2011','DD/MM/YYYY') edate OF DOUBLE UNION ALL
  SELECT tNom 400, 'B', to_date (' 6/3/2011 ',' DD/MM/YYYY') got, NULL FROM DUAL edate
  )
  SELECT * FROM task_dtl;
  
  
  Thank you

  The logical combination all weird, I guess (wildly guessing!) something like that...

  SQL> ed
  Wrote file afiedt.buf
  
    1  WITH task_dtl AS
    2    (SELECT 100 client_id, 'A' tname ,to_date('20/1/2011','DD/MM/YYYY') sdate,to_date('22/1/2011','DD/MM/YYYY') edate FROM DUAL UNION ALL
    3     SELECT 100 , 'B' tname ,to_date('22/1/2011','DD/MM/YYYY') stdate ,NULL edate FROM DUAL UNION ALL
    4     SELECT 200 ,'A' tname ,to_date('25/1/2011','DD/MM/YYYY') stdate,to_date('25/1/2011','DD/MM/YYYY') edate FROM DUAL UNION ALL
    5     SELECT 200, 'B' tname ,to_date('25/1/2011','DD/MM/YYYY'),to_date('25/1/2011','DD/MM/YYYY') etdate FROM DUAL UNION ALL
    6     SELECT 200, 'C' tname ,to_date('25/1/2011','DD/MM/YYYY')stdate ,NULL edate FROM DUAL UNION ALL
    7     SELECT 300 , 'A' tname ,to_date('20/2/2011','DD/MM/YYYY') stdate , NULL edate FROM DUAL UNION ALL
    8     SELECT 400 , 'C' tname ,to_date('1/3/2011','DD/MM/YYYY') stdate,to_date('6/3/2011','DD/MM/YYYY') edate FROM DUAL UNION ALL
    9     SELECT 400 , 'B' tname ,to_date('6/3/2011','DD/MM/YYYY') stdate ,NULL edate FROM DUAL
   10    )
   11  --
   12  select client_id, tname, sdate, edate
   13  from (
   14        select client_id, tname, sdate, edate, dt_rnk, tn_rnk
   15              ,case when count(*) over (partition by client_id) = count(*) over (partition by client_id, dt_rnk) then 1 else 0 end as cnt
   16        from (
   17              SELECT client_id
   18                    ,tname
   19                    ,sdate
   20                    ,case when sdate != edate then
   21                       first_value(edate) over (partition by client_id order by edate nulls first)
   22                     else edate
   23                     end as edate
   24                    ,dense_rank() over (partition by client_id order by sdate) as dt_rnk
   25                    ,dense_rank() over (partition by client_id order by tname) as tn_rnk
   26              FROM task_dtl
   27              )
   28       )
   29  where cnt = 1 or tn_rnk = 1
   30* order by client_id, sdate, tname
  SQL> /
  
   CLIENT_ID T SDATE                EDATE
  ---------- - -------------------- --------------------
         100 A 20-JAN-2011 00:00:00
         200 A 25-JAN-2011 00:00:00 25-JAN-2011 00:00:00
         200 B 25-JAN-2011 00:00:00 25-JAN-2011 00:00:00
         200 C 25-JAN-2011 00:00:00
         300 A 20-FEB-2011 00:00:00
         400 B 06-MAR-2011 00:00:00
  
  6 rows selected.
  
  SQL>
  

• Layers of combine: logic, process and Apex pages gui?

  When explaining models for example relational data or logic model, it is often easier if the template could be included as well as the process, or to the Applications Page navigation?

  Is it possible to combine the photo layer designs?

  Basically, it would be neat to be able to calculate dependencies of object database for the application of the Apex and pages applications Apex to the layer image.

  Rgrds Paavo

  Hi Paavo,

  How to represent on the elements of unique scheme of mode of data flow diagrams and logical and relational data types is shown here http://www.thatjeffsmith.com/archive/2015/04/more-fun-with-data-modeler-diagrams-in-version-4-1/

  So that I could begin to show the first process then add navigation of gui beside him and turn more details to the display by clicking the layer 'SHOW '.

  You can create overview subview as entry point to the network of the subviews nested - you can navigate forward and back using "Figure" diagram nested and ' go to the diagram >... ". "feature

  Philippe

• Problem with logic groups combining data at the point of importation

  I really hope that you will be able to help me with a problem I've had for the last few days.
  
  The scenario I have requires a logical group be created as the source data must be mapped differently if its + ve or - ve even thought the source account is the same.
  
  I created a logical group complex and added the corresponding logical group account in the account mapping table. The group uses the definition of rule 001806 *.
  
  The accounts that would be affected by this rule are below the values:
  18060000 - 2093096.69
  18060000 2093096.69
  18060005 - 2474955.48
  18060005 2474955.48
  18060015 11319512.13
  18060015-8000000 (a PEAK partner)
  18060015 - 3319512.13 (a PEAK partner)
  
  The + ve values need to go to an asset account and the values of ve - to a liability account.
  
  At the stage of import, I have a zero value which seem to be the sum of the values of the first 4, substantive values 3 then appear on individual lines.
  
  Step validate the asset HFM account displays the 3 + values of ve (15.8 M) Although 2 of them apparently wide net to zero with the values of the first and the third - ve. However, the liability account shows the background raising 2 (11. 3 m) as its missing the other 2 values - ve. Assets and liabilities HFM values should be the same
  
  In the account mapping, I'm using the following script for the + ve (its been reformatted for this forum):
  ' If varValues (9) > '0' Result = "BSA401000" Else Result = "Ignore" End If
  
  The script - ve is:
  ' If varValues (9) < "0" Result = "BSL625600" Else Result = "Ignore" End If
  
  I later changed the logical group to be Simple, but I get a similar result, although what I am trying to reach seems to be detailed in the Administrator's Guide FDM under the heading create accounts within Simple logic groups
  
  I understand that it is a little lengthy so apologies if you need more information, then please let me know and I will happy to provide more
  
  Thank you, James

  You could even put in place two mapping rules and avoid the complexity of a logic rule, if you wish. The mapping will continue to the next line if it does not meet the criterion, and there is no result.

  Side assets would be with a name of rule vAsset (you can change this, but it must be unique to the next line)
  If varValues (9) > 0 then result = "BSA401000."

  and then you add a second line to your card with a name of vLiab rule and check the sign flip.

  If varValues (9)< 0="" then="" result="BSL6256002">

  In the past I have avoided the rules of logic to the extent possible, by adding removes the ability to drill holes in the source file.

  Concerning
  JOINT TASK FORCE

• How to re - combine a HD and SSD in a player of "Fusion".

  Hi all

  Well, this process has floored me know how much time lost, he created and how the problem occurred in the first place.

  I am wanting to do a clean install of El Capitan on iMac late 2014 retina with El Capitan with a 1 TB drive merger 10.11.6.

  Boot from an external hard drive with OS X utility disk 10.11.4, wouldn't let me simple deletion of the reader. He came up with the error message "removing logical volume of the logical volume group cannot delete the storage base logical volume...". »

  So I started to investigate this problem and found:

  estorage-logical-volume-from-the-Terminal http://Apple.StackExchange.com/questions/136590/How-can-i-Delete-a-partition-Cor

  Who publishes various other forum known as the best solution to the problem. Knowing that I hate to use the terminal, I dove in full anyway. I was reformatting disks on Mac for 20 years without needing terminals?

  I got so far as to remove the existing with logical group:

  sudo diskutil cs deleteLVG

  and now the HD and SSD drives appear on the desktop as a empty volumes (which is fine, I don't need to save anything).

  But now, try to use the:

  sudo diskutil mergePartitions HFS+ "Apple_HFS Macintosh HD" (and different combinations of drive locations)

  results only in "the data partitions are not of the same disc.

  This is what I see with the "diskutil list; ECHO; Cs diskutil list "command in terminal.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB 121.0 Untitled disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Untitled 999,3 GB disk1s2

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 DIS3

  1: EFI EFI 209.7 MB disk3s1

  2: Apple_HFS Mac Master Image 2016 499,2 GB disk3s2

  3: disk3s3 Apple_Boot Recovery 650.0 MB HD

  I have no idea how recombine the separate HD and SSD drives in one drive of Fusion, with which I can then do a clean installation of El Capitan. Can someone please!

  Also, how can quickly and safely erase a disc from Fusion in the future? I need to deploy a new image of master with all our software top one another 10 times, and I want to completely erase the readers for clean installs (with Migration Assistant for about 8 years, moving from a system has resulted in a lot of weird and wacky behaviour on our Macs) and it is time for a clean install for each of them.

  Again, I'd be very happy any help on this.

  -Alex

  Please read this message before doing anything. If you don't feel confident that you can follow the instructions, ask someone more experienced to help you.

  This procedure applies only to an iMac or a Mac mini with a drive installed in the smelter.

  You must read these instructions while no web browser is running, so either print them or load them onto another device before you start.

  1. all the data on the internal disks will be deleted, including Boot Camp data, which are not saved by Time Machine. You need at least two complete and independent backups. A backup is not enough to be sure. There are ways to back up a computer that is not fully functional. Ask if you need advice.

  2. you will need to start one recovery system other than the one on the internal hard drive (if he has one.) There are several ways to do so.

  a. If you have a backup time of the Machine (not a network backup), or a compatible Mac OS X installation on an external drive, then you should be able to start it by holding down press option key to start ringing. Select the external hard drive in the row of icons that is displayed. I mean by "compatible", an installation running on the machine. A version of Mac OS X that is older than the machine is not compatible.

  b. If you used Recovery Disk Wizard (or can use it now) to prepare a system recovery on a USB flash drive, you can start that by pressing the C button on the ring. No icons will appear. Startup will be much slower than usual.

  c. start the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe. Select a language, if you are prompted.

  Note: You need an Ethernet or Wi - Fi connection to Internet to use the features of recovery network. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  3. disconnect all other external storage devices.

  What happens then depends on what version of recovery that you are running.

  ☞ If the machine came with OS X 10.10 ("Yosemite"), 10.9 ("Swat") or 10.8 ("Mountain Lion"), and you're in the recovery of the Internet, please take step 4a and skip step 4 b.

  ☞ otherwise, go to step 4 and go to step 4B.

  If you are unsure which version of Mac OS X, the machine came with, search for it on this page.

  After taking these steps apply, you must have a reader of empty Fusion named 'Macintosh HD' on which you can perform a 7 step or step 7B.

  4. repair of the Fusion drive (see "Troubleshooting" on the linked page.) Quit disk utility and go to step 7A or 7B step. Skip steps 4, 5 and 6.

  4. in the OS X screen utility, select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  5. triple - click anywhere in the line below to select this option:

  N=Macintosh\ HD; for d in /dev/disk?; do o=`diskutil info $d`; for D in SSD HDD; do eval [[ ! \"\$$D\" ]] && grep -lqw "APPLE $D" <<< "$o" && eval $D=$d; done; [[ "$SSD" && "$HDD" ]] && break; done; diskutil cs create "$N" $SSD $HDD && diskutil cs createLV "$N" jhfs+ "$N" 100%

  It is a very long line, and you won't see it on the web page. Be sure to select the entire line, not just the part that you can see.

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  6. in the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination. Wait for a new line ending with a number sign (#) to appear. If nothing happens, press the return key.

  Quit the Terminal must be returned to the main screen.

  7. If you have a Time Machine backup, connect the device to backup and restore your data. If you have saved to a network like a time Capsule device, it must be connected automatically.

  7B. If you do not have a Time Machine backup, or if you can not restore from Time Machine backup that you do not have, install OS x Restore data later in The Migration Wizard.

  In the Internet recovery mode, you install the original version of Mac OS X comes with the machine. If you have upgraded the operating system on the App Store, you will need to do it again.

• Basic and stupid, but frustrating: how to set top/receive the sound of Focusrite Scarlett 2i2 in logic?

  Sorry to ask, I feel super stupid especially because I just took a record class this semester, but it's still where I got stuck for awhile it too: I so Scarlett 2i2 all set up and plugged into the port USB drive on my MacPro, with cables (1) (2) an electric guitar and a microphone , and light and everything seems to be connected correctly, but I can never understand what to do once I open the "empty project" in Logic Pro X, i.e. the Audio input > then what? I tried a number of combinations (entry 1, entry 2, entry 1 + 2) with two tracks and at times different logic seems to capture sound from either the microphone or guitar, but never both at the same time, and when I try to register, I get nothing. I know the 2i2 back sound, but I don't know how to get it in logic too - I am missing as a headphone set big enough to fit into 2i2 currently taking, then maybe this is part of the problem? Perhaps? I have no idea. Advice or simple suggestions are appreciated!

  In the logic->-> audio Preferences that you have set up your input device to be the Scarlet?

  Next, create two strips of channels (Audio)

  Press x to open mixer and set strips in mono channel by clicking on the two circles - a circle is mono.

  and on the entrance to the channel bandwidth select input 1 and input 2 for the other...

• Can Logic Pro mix audio film?

  Hi, I've separated audio and video recording of a concert by the band, I'm sure that LPX splice them so that they are synchronized, but how do I then get the result of the combined for UTube?

  Of course logic can do:

  • Import the Audio file to your project of logic
  • Import the video file (file ➤ ➤ open film...). Only one video at a time in an open project
  • Drag the Audio and/or video to synchronize manually
  • Make a few necessary mix (fade, eq, compress, etc..)
  • Use the file ➤ ➤ film export Audio to movie... command to create a new video file with audio mixed in
  • Download the video file to your YouTube account.
  • Optional: watch your YouTube video go viral

  For the detailed procedure, see the manual.

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Zoom r16 output does not reflect the master Pro Logic output

  I have a Zoom R16 hooked to Logic Pro X on El captain.

  Everything seems to work fine, but the release of the Zoom R16 always gives the sound, the monitor of the line, not the output of Logic Pro X inputs. If the helmet and out of line always give the full release of all entries and not the combination of Logic Pro. On the master output indicators seem to give the right indication (that is, not if all the sliders are declining), but that does not reflect the sound on the output.

  Is this a settings problem, a problem with Logic Pro or a problem with the Zoom R16.

  Anyone who suffers it, or has a sollution?

  How exactly this is connected to your Mac?  I guess that via USB?

  You have the latest drivers for it?

  Have you checked the Audio 'MIDI settings' application (Applications > utilities) to check that it is correctly configured in the operating system?

  Have you checked its configuration in LPX?  Two place to check.  1 - logic Pro X menu > control surfaces > Preferences 2 - Logic Pro X menu > control surfaces > Setup

• Logic pro 9 crashing

  Logic Pro 9.1.8 (1700.67) - OS X El Capitan 10.11.2

  Mac Pro mid-2012

  1. 3.2 GHz Quad-Core Intel Xeon

  14 GB 1066 MHz DDR3 ECC

  ATI Radeon HD 5770 1024 MB

  -------------------------------------------------------------

  So logical crashes constantly in two different circumstances...

  1: at some point in the project, I'll spend my screenset (with 1, 2 or 3 as the quick access keys) to get a different view to my project. When the screens are trying to change the two go black and about 3 seconds later I get a crash. After these accidents the project will be recorded as "hip-hop (crushed)." If some of my pieces have 10 + (crashed) behind the title.

  2: the other instance where I get a crash is when I'm doing my due diligence and randomly the CMD + s for a backup. Recording can run 5 to 25 times, but at some point it will say "the project «...» ' cannot be saved. "But right after that I'll save it and it will save perfectly. Only to then crash out of nowhere part 20-30 seconds later.

  I'm tired of dealing with this and I removed a lot of defective au. Run the diagnostic tests, etc.

  Report of crash on crash specific thread below:

  Request for clarification:

  Abort() called

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_kernel.dylib 0x9901c58a __pthread_kill + 10

  1 libsystem_pthread.dylib 0x990a8448 pthread_kill + 101

  2 libsystem_c.dylib 0x92c61d00 __abort + 187

  3 libsystem_c.dylib 0x92c61c45 demolition + 173

  4 com.apple.logic.pro 0x003e6729 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3842985

  5 libsystem_platform.dylib 0x9d73b01b _sigtramp + 43

  6   ???                           0 + 4294967295 0xFFFFFFFF

  7 com.apple.logic.pro 0x003e6770 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3843056

  8 com.apple.AppKit 0x947dc367-[NSWindow initWithContentRect:styleMask:backing: postpone: screen:] + 107

  9 com.apple.logic.pro 0x007c5709 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7902089

  10 com.apple.logic.pro 0x007c7796 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7910422

  11 com.apple.logic.pro 0x007c789e std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7910686

  12 com.apple.logic.pro 0x0073faaa std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7354154

  13 com.apple.logic.pro 0 x 00741504 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7360900

  14 com.apple.logic.pro 0x00741fdb std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7363675

  15 com.apple.logic.pro 0x003e4be6 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3836006

  16 com.apple.logic.pro 0x001cd0c7 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 1641799

  17 com.apple.logic.pro 0 x 00616967 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 6137319

  18 com.apple.logic.pro 0 x 00613735 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 6124469

  19 com.apple.Foundation 0x988babcb __NSFireTimer + 117

  20 com.apple.CoreFoundation 0x95ef2826 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22

  21 com.apple.CoreFoundation 0x95ef22d2 __CFRunLoopDoTimer + 1250

  22 com.apple.CoreFoundation 0x95f79d6d __CFRunLoopDoTimers + 349

  23 com.apple.CoreFoundation 0x95eaa2a1 __CFRunLoopRun + 2113

  24 com.apple.CoreFoundation 0x95ea97f6 CFRunLoopRunSpecific + 390

  25 com.apple.CoreFoundation 0x95ea965b CFRunLoopRunInMode + 123

  26 com.apple.HIToolbox 0x95a5c2f1 RunCurrentEventLoopInMode + 267

  27 com.apple.HIToolbox 0x95a5c0f3 ReceiveNextEventCommon + 503

  28 com.apple.HIToolbox 0x95a5beec _BlockUntilNextEventMatchingListInModeWithFilter + 99

  29 com.apple.AppKit 94630512 _DPSNextEvent + 1053 x 0

  30 com.apple.AppKit 0x94a3b0b0-[NSApplication _nextEventMatchingEventMask:untilDate:inMode: dequeue:] + 1057

  31 com.apple.AppKit 0x9462ff8b-[NSApplication nextEventMatchingMask:untilDate:inMode: dequeue:] + 121

  32 com.apple.AppKit 0x9462512f-[NSApplication run] + 1063

  33 com.apple.prokit 0x013d6b80 NSProApplicationMain + 415

  34 com.apple.logic.pro 0x0002bad5 DummyConnection::DummyConnection() + 193

  Here's the thing...

  Logic Pro 9 is not supported under El Capitan... Its considered to be an application of EOL (End Of Life) these days... so don't expect any patches or updates.

  Your choice is...

  (1) roll to a combination of OS X and previous LP9 that worked... using your backups...

  (2) updated Logic Pro x...

  That's all...

  Note: Partial copies of incident reports do not help possible all troubleshooting... like to much info is missing.

• Logic Pro

  Hi all

  I always use FL studio. I think the conversion of Logic Pro. I need your help with a couple of points listed below:

  1 - What is the best version to buy.

  2 - What about the plugins, synths and packs. In FL studio, I had the habit of checking the best synths, plugins, and modules and I used to buy the individually. I do the same thing with the logic. Or y at - it a complete package that provides me with the software and all the necessary modules, I need. If so, what is the price for it.

  Appreciate your support.

  Best buy - the current version (which I think is the only one you can buy).

  Logic comes with a plethora of instruments, combinations of synth, effects, plugins, etc and they are all included free of charge with logic. You can also use plugins more 3rd party too...

• FileVault has failed. Unable to encrypt the logical volume to basic storage

  Hi, I have just bought a new iMac and decided to not migrate from my previous Mac (I got 5 machines). Instead, I decided to install all the software and my own docs.

  Now I have the iMac perfectly clean and nothing makes 'noise '.

  When I'm trying to encrypt my HD, there is an Error Message "could not encrypt the logical volume to basic storage.

  It does allow me to continue.

  I restarted the mac several times and I ran the first aid.

  Details of soft and hard are the following:

  

  

  Any ideas? Someone with the same problem?

  Thank you!

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  { diskutil list; echo; diskutil cs list; } | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• Combine the signals

  Hey guys,.

  I try to combine the two signals, but I got an unexpected error when I combined a relay. According to me, I'm missing something here, and I've tried everything...

  Objective: The data entry follows different ways depending on the switch. If its follows the first input channel then the doesn´t signal to change, but if it goes to the second, then get delayed according to the TTL pulse generator. I m trying to use the "logical operations" block to combine the signals but I get an error and I have already tried with different blocks, but still getting errors

  It would be really nice if you can give me a tip

  Joint I m sending a picture of the arrangement and the error.

  Hugs,

  Celso

  
  

• Boolean logical operation

  Hello! Recently, at work, I was responsible for creating the code that returns something on two Boolean State. Something like: If Boolean has and Boolean B, return if Boolean is and B no Boolean etc something else.

  At first I thought that the best way to do it would be a formula node with the return value is passed through a bunch of if else statements. Then I discovered that Booleans are not supported in notes formulas and forms knots are designed for writing formulas, and not for current programming, that makes sense.

  I came with two ways to do it, but I felt that they were both quite stocky and they suck if I had more than 2 Boolean values my logic on the basis. Here is the code with the two different methods.

  

  I feel like this is an operation that would be much better to do it in an if else statement in code and I would like to know if there is a better way to do this in LabVIEW.

  Typical in LabVIEW is to combine Boolean both in a table, then use of the boolean to number table. This will give you a value between 0 and 3 (included). You can use a single case statement, or you can create a table of values of output desired and use it as an index in the table, or if there is a direct mapping of the enum, you can simply convert that number to the enumeration type.