Login Apple ID on the problems with Web site?

Didn't know were this post so I thought he would get the most exposure here.

Went to go and manage my Apple ID to https://appleid.apple.com/ and it seems that Apple has revamped the journal in the process.

I put my Apple ID and password and then had the guest to send the 4 digits to my iPhone, no problem.

Then the next page request to send an email to my email Apple ID to verify my identity. Well my email Apple ID is therefore more accessible.

Apple ID has been set up oh so long with an old email @verzion.net.

Apple has never asked me to verify my identity on this email address since it's just an identifier Apple and not really an email address.

Is this a bug?

I don't think that - most of the time - your email address is your Apple ID. So, try these:

On your Apple ID email addresses - Apple Support

If you get anywhere like that, try this:

Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

Edit:

FWIW, I just for me (and Yes, this site is under reorganization), but was sent directly to my page with all info - No 4 figure whatever it is (would work here anyway since I don't have a smartphone).

Tags: iTunes

Similar Questions

  • Cannot synchronize windows security 8 for the family with Web site

    I already have a security account for the family windows on pc windows 7 of my son.  We just got him a windows Tablet 8 for school and I want to add this device to his account with the same settings.  I went through the installation on windows 8 (creation of a local child account for him, which allows security for the family for the account).  When I hit the button to manage the settings on the family safety website, it tells me that the service is not available.  My Internet as fine (since I'm on this site), so I doubt that it is a temporary problem.  On the family safety website, it shows its Windows 7 PC, but not the tablet of windows 8.  Someone has ideas of how do I synchronize the security settings for the windows family 8 with the site?

    Hi Mike,.

    Do you get the error message when you press the button "manage settings on the family safety Web site?

    You can check the status of the safety of the family here: https://status.live.com/detail/fss

    It is possible that your Microsoft Account needs a form of additional verification.

    Follow these steps:

    1 1 glisser slide from the right side of the screen, then select settings

    2. Select change PC settings.

    3. Select accounts

    4. Select your account

    Now, you can see some indications that your account or the machine needs additional checks. If you could click on the link and follow the instructions provided, this might solve your problem.

    Once you are done, follow these steps:

    1. go in other accounts (under accounts where you were previously).

    2. Select the account you want to have a child, and then click change

    3. change the account to a child account, then select OK.

    To ensure that you are connected to the parental control service, follow these steps:

    1. press on the button of the window on your keyboard

    2. tap parental controls and select parental control

    3. press on the large enough to Manage settings on the Family Safety website button.

    4. you should see a list of people who can manage these settings online.

    Let us know the result. If you have any other questions, we will be happy to help you.

  • Internet Explorer problems with Web site

    We have problems with our site Web display correctly in older versions of Internet Explorer. It seems fine in the newer versions and other web browsers, but in Internet Explorer its is not centered and the information is sent down below the navigation. The site is www.wctractor.com for help or answers are greatly appreciated.

    The first lines of the document shows

    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

    Internet Explore hate having to look down the document to highlight lines, spits the dummy and goes into Quirks Mode (i.e. a mode before IE5).

    Remove the

    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

    bit and place the following on the first two lines of the document

    IE will be a very happy chappy after that.

  • When Apple will fix the problem with 9.3?

    Since IOS 9.3 was just downloaded (night of 26 March) and not yet installed, my iPad (Wifi and boxes) Air did not work properly:

    By clicking on a link in GMAIL or AOL emails causes the iPad to freeze.

    Safari does not work.

    Chrome does not.

    When I tried to install the update already downloaded 9.3, the installation did not check because I was "not connected to the internet."

    On Monday, March 28, I noticed many others had similar problems with 9.3, and I tried the recommended fixes:

    Disable Java Script

    Remove Booking.com

    Delete web browsing data

    Restart the iPad.

    None of these bugs worked.

    Tuesday morning, March 29, the Update 9.3 installed correctly, but none of the symptoms have been set.

    I refuse to downgrade to a version 9.2 based on serious disadvantages noticed by others who have tried it.  Besides, why should I do an Apple problem be my problem?

    When will this problem be resolved?

    MJSF wrote:

    When will this problem be resolved?

    No one here works for Apple (and anyone who works for Apple would be bound by an NDA), there is no way to answer this question. You will have to just be patient.

    The update that was released was for something different and more critical.

  • A lot of problems with Web site. May be the problem of Java.

    I'll try to give as much detail as possible.
    1. a few youtube videos will not play.
    2 thumbnails will not appear.
    3Facebook does not load. All I get is the top tool bar. Can't see newsfeed, messages etc.
    4 Omegle doesn't work.
    5. on the reddit Web site, I can't close the session.
    6. I can't upvote or downvote.
    7. I can't minimize a thread.
    8. on some fourms I can't do more options like add photos.
    These are the errors I get. http://i.imgur.com/1BSx9.PNG

    I tried to disable all addons and plugins. I tried to uninstall. I tried to empty cache. I tried to erase the history. I even did that javasrcript has been activated. The strange thing is, it's not just firefox. Chrome and IE do it too!
    Help!

    EDIT: Yahoo does not work either. I had to confirm on my phone


  • PROBLEMS WITH WEB SITE

    I always have problems with the site freezes Kohls with the cursor in the box "add to bag". However, I tried accessing the site Web of Kohl by using Internet Explorer (I never use). In any case, it worked! Why it should work OK in Internet Explorer and not in Firefox? What should I do now?

    Okay, AdBlock Plus is very good, and I don't know about the others. What I recommend is disabling all then by visiting them the page. (Make sure you reboot if you need to disable addons) Tell us if the page works after that.

  • I have problems with Web sites that require cookies. In PRIVATE life, I checked ACCEPT COOKIES and third PARTY COOKIES. However, I still have problems. I used your "cookies enable and disable" but it still does not work. Thank you.

    For example, I went to the site of Netflix (which I am registered on) and immediately I get a screen that asks me to enable cookies and gives me links to instructions on how to enable cookies for different operating systems.

    Always good to start with a fresh reboot with Windows XP, if a question just happens.

    Check your security software settings, you can block at this level, firewalls and modules FF.

    (1) FF settings: tools, Options, Privacy tab change, keep until: ask me every time, click OK at the bottom of the box. Then try to go to NetFlix, if you're not invited on the cookies, they don't get FF, get back to your other software security settings and modules of the FF.

    https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-14-e458fa.PNG

    (2) next FF settings: tools, Options, privacy, Exception button tab, add the web address of Netflix, and click allow, ALSO check all the parameters of BLOCK. Click the close button, ok button and test the results.

    https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-05-ed2938.PNG

    (3) following FF settings: tools, Options, Security tab, click on the Exceptions button, add the web address of Netflix and click allow. Click the close button, OK button and test the results.

  • Problem with Web site button

    I just started using flash, but I'm getting a little better. I bought a model by the monster and have slowly picked up on flash. Here's my problem and forgive if I use incorrect terminology or seem ignorant...

    I have a page on my site that has 4 buttons on each side... video clip a button looks like a bar with a little arrow at the end clip. I'm sure you know what I mean. When you play with the mouse on the page that we meant to obviously go through his actions and alert user there is a link. If I put my code on the clip, you must move the mouse over the arrow to display the link. If I put my code on the layer button, it causes all 8 of the boxes have the same action/link and if I change one that changes everything.

    What I am doing wrong? I can't understand it.

    I think the answer to your question is to duplicate the button in your library for each instance that you will place on the stage. Give each one a different name. What you use, with all eight buttons to behave about the same thing, is that you placed a button on the stage eight times so they all have the same behavior. Create 8 individual buttons with unique names and place them on the stage. There is a way around this with actionscript, but since you're a beginner, I think the above solution is simple, down and dirty. I hope this helps.

  • Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

    Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

    The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

    The site identity button | How | Firefox help

    Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

    Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

  • Problem with pdf for the opening of the health gov Web site.

    Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

    In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

    I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

    Thank you!

    Keren

    Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.

  • What is the problem with Safari?

    Since the last update of El Capitan, Safari has become almost worthless.  I can't use it. It will give me the beach whirling death ball. I can not click through links. the full page is not displayed.

    What the * is the problem with that?  It's the kind of shit that I would wait in a Microsoft product. I had started using Chrome.

    What the * wrong with Safari and when you're going to fix?

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • What is the problem with my iMac mid-2011

    Hello

    Need help find out what is the problem with my iMac to mid-2011.

    Yesterday during a reboot it just never came to life.

    On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

    VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

    Connected to an external monitor and shows nothing of too - no signal.

    Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

    From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

    Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

    I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

    If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

    If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

    That first, then write again for additional suggestions if you are still having problems.

  • What is the problem with kernel_task?

    Hello everyone,

    What is the problem with kernel_task?

    I explan: Macbook Pro early 2011 LION OS up to date.

    I bought 8 GB on China supplier, CRUCIAL...

    Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

    Well, I went back to a clean install, a manufacturing one, with nothing.

    Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

    Sometimes the kernel_task crazy sometimes not...

    Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

    Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

    I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

    So what?

    I bought something conivient on Support and friability so today he's dead?

    What should do?

    If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

    Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

    http://support.Apple.com/kb/ht2546>

    http://support.Apple.com/en-us/HT200553>

    The panic report should have "panic" in the name of the file.

    Kernel panics tend to come from 2 sources

    • Material:
      • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
      • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
      • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
    • Software
      • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
      • Other core 3rd party extensions are a distant 2nd.
      • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

    If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

    Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

    The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

  • "the problem with playback device" with Skype.

    receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

    Hi BeverlyBowers,

    Facing any problem with the sound on the computer other than on Skype?

    Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

    Method 1:
    I suggest you to run the Fixit and check if it helps.

    Automatically diagnose and fix the audio problems and Skype webcam
    http://support.Microsoft.com/mats/Skype/

    Method 2:
    If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

    a. go to Start and click on Control Panel.
    b. click on her, then a new window will open.
    (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
    d. now check if the speaker or headset is listed here and right click above and choose Activate.
    e. highlight the speaker or headphones and click on 'Set as default'.

    Method 3:
    If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

    I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

    and my phone

    iPhone 6plus

    You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

Maybe you are looking for