Logins: Message ACWLIcon.exe

Similar Questions

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Empire Total War installation and getting the error message "steam exe (main exception).

  I just bought a new laptop Assus with Windows 7 and bought the DVD Empire Total War.  I put in disc 1 and click on install.  He loads the updates and the steam but then stops and gives me the error message steam.exe (main execption) unable to load library Steam. DLL. I click OK and then install any more.  I have de-installed Steam, Steam sent a request for help, got another way to install the Internet, created a Steam user ID and password... Yet, it is still impossible to load the library. Can someone help me? I want fair paly this game and I am ready to kill people to steam.  Please tell me an easy way to install this game so I can play?

  Try to use a hard - wire to your router configuration and see if that helps.

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb.

  I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?

  Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.

  Hello

  Have updates you installed? You can check this in the history of the update?

  Step 1: To check the update history, follow these steps:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 2: Refer the article that could help you solve this problem.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
  http://support.Microsoft.com/kb/927385

• at startup I get messages, keyhook.exe. Impossible to find components

  When I start my computer I get messages, keyhook.exe. Cannot find the components,

  application has failed to start because

  sisbase.dll was not re - install the applictation may fix this problem

  any help would be good

  Hi philljag,

  ·          What is the number and the model of the computer?

  ·          Do you remember all the recent changes on the computer before the show?

  ·          What is the service pack installed?

  ·          You have security software installed on the computer?

  It seems that the problem is with SIS graphics driver installed on the computer.

  Try the methods below:

  Method 1:

  Check the display device status in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

  Method 2:

  Install the most recent and updated drivers for your screen reader and check the results. You can check the link for the steps below: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• Get error message - Activation.exe (0xc000007b).

  Original title: Activation.exe

  Hello

  I receive a general error message - Activation.exe (0xc000007b).  I have a Sony Vaio VPCEC3SOE, running Windows 7, anyone got any ideas?
  Thank you
  Mark

  Hello

  Often we see a strange behavior as the result of a program from loading at startup. To solve these, we use the clean boot troubleshooting. The following article describes this process: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• When I try to create a restore point, I get this message: Systempropertiesprotection.exe - corrupted file.

  When I try to create a restoration point, a message is displayed on the lower right part of the screen and I get this message: Systempropertiesprotection.exe - corrupted file.
  In addition, it tells me to run Chkdsk. I am doing and not of results. If I search for the file, Systempropertiesprotection.exe happens in several different directories along with one. Record of MUI with the same name. The computer seems to work very well, but my suspicions are triggered. Any suggestions?

  Hi Popo75,

  Let us try the following steps to solve the problem.

  Step 1

  Sometimes the malware could have disabled the files. Try to run an online scan and see if it helps.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If this does not help, try the next step.

  Step 2

  Try to run the Design Checker (SFC.exe) system files and check if the problem persists.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Check the link for more information:

  http://support.Microsoft.com/kb/936212

  Step 3

  If the problem persists, create a new user account and check if you still have the problem:

  To create a new user profile:

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link for more information on creating a new account below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• error message: sysdoc32.exe failed to start because 532stat.dll was not found

  I have no idea what to do about this error message: "sysdoc32.exe could start because stat.dll 532 not found."  I'm not very computer.  All I know is that I had to do a system recovery because the screen kept freezing, and often Internet Explorer has stopped.  I ran all the scans for viruses, etc. and no problem there.  So, what I do about the error message?  Can someone guide me through the process very carefully and in detail?

  Thanks advance!

  You run to the recovery of the system using Hp Recovery Manager?

• Unable to play the game Age Of Empires II, you receive an error message "AppCrash.exe".

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I want to play Age of Empire II...

  but it does not start...

  m make error appcrash...

  Please suggest solution for me...

  My Info system is as follows:

  System manufacturer: Alienware
  System model: M17xR3
  BIOS: InsydeH2O Version 1.0 A09
  Processor: Intel Core i7-2760QM CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 16384MB

  Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830) - 0333

  Display:

  Card name: AMD Radeon HD 6970 M

  Hi Girish,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems that you are having problems with the game Age Of Empires II, you receive an error message "AppCrash.exe". I'll help you fix the problem.

  (1) what version of the game is installed on your computer?

  (2) did the problem started recently?

  (3) have you made changes on the computer before this problem?

  Step 1: Let me inform you that the game is not compatible with Windows 7.

  You can check the link below:

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=Age%2Bof%2BEmpire%2BII&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Step 2: If the version of Age of Empires II is not compatible, I suggest to install the program under Windows XP service pack 2 compatibility mode and check if that helps.

  Make older programs to run on the version of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• Websheet login message

  APEX 4.2 if I put the message 'Login' in the property websheet I see what follows. He makes the same HTML.

  

  Currently on apex.oracle.com the message does not appear.

  

  Should it? known issue?

  Hi Scott,.

  interesting, thanks for the info! The login message probably was a victim of the IU 5.0 reorg. I filed bug #21651702 for that matter.

  Kind regards

  Christian