Logitech H530 being not recognized

Similar Questions

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• map of mSATA being not recognized on X 220-help

  Lenovo x 220

  Winodws 7 64-bit, up to this day

  MyDigitalSSD Super Cache2 50mm SATA III (6 G) mSATA SSD

  I installed my mSATA card by following the instructions and the party went well. As a couple of other people the player is not recognized by Windows 7. I checked storage management in windows 7 and the drive is not there in any form. I disabled all the caches as suggest some positions in the policies for the drive in windows 7. Once again no drive recognized.

  Any help you could provide would be really appreciated.

  Thank you

  Hi camjohnston,

  There are a few discussions about this on this map and a knowledge base article for you to check.

  Let us know what you find!

• Any update yet to USB sticks being not recognized?

  I searched for help and found similar problems have yet to see any real solution.  Seems that many face the same problem with key USB cannot be recognized on Windows 7

  Is there any solution yet?  I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!

  See you soon

  Hello

  Have you checked the player on other computers running Windows 7, Vista or XP?

  Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.

  It is SanDisk however, these methods can help with other brands of USB keys.

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Check with manufacturer's support the system, their drivers and documentation online and ask for their
  Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
  USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).

  If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
  -in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
  are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.

  If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
  is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
  Home service) or system manufacturer support can be requested.

  ============================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Being not recognized in dimension 8400 DVD drive

  Hi all

  I have a problem with my DVD drive in my dimension 8400 (about 3 years)

  I can open the DVD player and insert DVD/CD but they are not recognized,

  My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

  I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

  I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

  Im not a computer newbie, so I tried several things to try to make it work:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

  Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

  I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

  That's my problem.

  Thank you very much if anyone can help me

  Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

  Concerning

  Rowan Schaap

  
  

• (Mouse Logitech) USB device not recognized

  Hello

  I just bought a Logitech mouse and it is recognized of nto Vista. I use a dell vostro laptop 1310.
  I have uninstall it, scanned for new devices through the Manager of peripherals and same problem.

  It's the third mouse in 10 days. I used 2 mouse belkin that I had to send back because of the same problem.

  Any ideas? On the Logitech site, it says that the mouse came not with drivers such as native usb drivers are used.

  If anyone has had the same problem please advice

  Hello

  Please visit this link

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&ServiceTag=&SystemID=VOS_N_1310&OS=WLH&OSL=en&CATID=&impid=

• Functions in the script being not recognized after objects as some point

  Hi all

  I wonder if someone has understood why after normally 300 to 500 lines of JavaScript in a Script object, sometimes functions to the end are no longer recognized by the XFA processor when they are referenced ("' TypeError: Scripts.myFunction is not a function" ").

  When re-sort, further to the top of the script object, they work as expected. The line on which it no longer recognizes functions also is not always the same and I worked with some script objects with more than 800 lines with all functions still work.

  I tested Designer 9 and 10, Reader 8 9 and 10.

  At least let me know that I'm not the only one. I knew another developer who had encountered the same problem.

  Kyle

  I've never had a problem with big scripts, even with 1000 or more lines.

  Did you test your scripts JSLint?

  Dirty syntax can always have side effects.

  http://blogs.Adobe.com/formfeed/2010/09/JavaScript-lint-check-in-Designer.html

• Flash being not recognized as installed

  I had this problem last year and I was able to remedy this by copying the contents of the folder system32/macromedia/flash on firefox/plugins folder. This solution does not work for now. It appears to come to install the latest version of the player.

  I have tried absolutely all of the suggestions made for each similar survey posted. I've uninstalled and reinstalled Flash and Firefox so many times that I lost count. It goes the same for Firefox reset. Simply Firefox won't recognize the plugin. I, of course, checked the Firefox utilities for the identification of the plugins installed.

  I desperately need a fresh solution. Does anyone else have this problem?

  If Firefox does not have the Flash plugin in its installed location of the probably missing registry key that Firefox uses to analyze for the Flash plugin.

  • https://developer.Mozilla.org/en/Gecko_Plugin_API_Reference/plug-in_Basics#How_Gecko_finds_plug-ins

  You can copy the files of the plugin in the browser\plugins folder or in a folder plugins in the current Firefox profile folder or the Mozilla\plugins parent.
  The plugins folder in the Firefox program folder is no longer used.

  • http://www.gHacks.NET/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-Firefox-21/
  • http://Mike.kaply.com/2013/04/24/major-changes-coming-in-Firefox-21/

• Webcam stopped working says insert USB after that reinstalling but being not recognized help pleae

  I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.

  Hello

  1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
  2 do you see anything unusual (yellow bang) in Device Manager?

  Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.

  Step 1: Use Device Manager to find the hardware changes
  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.
  Note If you are running Windows Vista, click Start and then use the search box.
  b. type devmgmt.msc, and then click OK. Device Manager opens.
  (c) in Device Manager, click on your computer so that it appears highlighted.
  d. click Action and then click Scan for hardware changes.
  e. check the USB device to see if it works.

  Step 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

• BlackBerry Smartphones help please error 552 more being not recognized by computer on 8520

  Hello

  I was wondering if someone could help I have tried everything to fix the error 552 on my curve 8520 but nothing works, and now the phone will not connect to my laptop, I tried apploader now it says device current is updated, office says unable to connect to the device (from the outset) software and the phone does nothing except sitting on a white screen with "software reloading 552" written on it.

  Could someone please help?

  Hi Davidemmy2

  Welcome to the Forums of the BlackBerry Support

  As your device does not detect that you can try the Application loader to force detection of your device to load the operating system, please see the Knowledge Base Article:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  But remember, in this process, you will lose all data in your device, I hope you have your backup.

  Further information: KB18751 : error "Reload Software: 552" appears on the smart phone BlackBerry.

• being not recognized by media player MP3 player

  I just bought an mp3 player and as its been install a message popped up and said that a problem had occurred. Is to recognize the device when I put it in and devices but media player is the grateful, please help!

  Hello

  1. What is the brand and model of the mp3 device?

  2 are the device thrown into the Manager of peripherals, devices and printers? If Yes, do you think that no matter what exclamation point?

  Consult the following links.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  http://Windows.Microsoft.com/is-is/Windows7/install-view-and-manage-your-devices-and-printers

  3. What is the full pop-up message?

  4. other external USB devices work properly on your computer?

  5. have you tried to sync the mp3 player?

  6. have you made changes on the computer before this problem?

  Method 1:

  You can check the compatibility of the mp3 player. Check out the following link.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Method 2:

  You can run the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  You can follow the procedure.

  (a) open Windows media player.

  (b) click on tools.

  (c) select options.

  (d) under options, select devices.

  (e) click Refresh and check if you are able to see the mp3 player.

  Method 4:

  If you can not sync in Media player then try the synchronization manually. Consult the following links.

  Sync manually in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-sync-frequently-asked-questions

  For more information, see the following link.

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/sync.aspx

• vGPU, being not recognized in Windows (but visible of all kinds in the Device Manager with!)

  Hello

  I hope I found the right place to ask this question.

  Im trying to configure with network cards K1 on esx vGPU 6 and windows 2008 R2.

  I managed to get the GPU passthrough works fine but I want to continue vGPU (last n more)

  That's what I've done so far.

  Installed esx6 on Cisco UCS C240 M4 (CPU value high performance max flow and mem)

  installed the last grid VIB Manager

  
  

  i.e. esxcli vib software install - no.-GIS-check-v /vmfs/volumes/ISO/vib/NVIDIA-vgx-VMware-346.27-1OEM.600.0.0.2159203.x86_64.vib Result of the installation: Message: operation completed successfully.

  
  

  NVIDIA-smi reports 8 x 4gig GPU

  
  

  Using the vmware webclient service, I create a virtual machine and assign it a profile of vGPU (180 in this case). He tells me that I have reached the maximum number of devices of this type (google was not helpful about this message).

  
  

  In the vSPhere console, I see a PCI Device 0 added to the new virtual machine, it is said he has not supported with a note saying "this virtual device type is supported but support it is not supported on the current host... »

  
  

  When I install windows on this virtual machine, I get a yellow! on the standard VGA graphics card with error device cannot start Code 10. Any attempt to install NVidia drivers cannot complain that it cannot detect the graphics hardware.
  

  
  

  The thing is, I'm sure I got this work before, but now it feels like Ive hit some limits as suggested by the message "maximum number of devices.

  
  

  I tested using vmware 5.5 and 6.0 tools
  

  
  

  Any suggestions aside from just rebuild again?

  Hmm, it seems that the comment on the unsupported PCI device may be an effect to use instead of the web client vSphere client. I created a new virtual from Windows 7 machine and used the provided in the package VIB of nvidia driver and it worked. In the console PCI device said still not taken in charge. I will try to update the driver in our w2k8 server now.

  Update: Yes, it seems that I used the wrong driver package. It seems that I can have tried to use another driver which I suppose was for use with vSGA or pass through.

  nothing to see here, move along

• Card video PCI-e, being not recognized by system

  Hi all

  You are the very welcome.

  I agree with vynga that you should get integrated VGA video and digital display port.

  The advantage of the display port would be the Vice of analog digital video output, which is what you get on the VGA port.

  Display port is good for video display HD, if that matters to you.

  Me, I would get the video from HD 6450 card and have 3 options... VGA. HDMI and DVI out and a boost in graphics to start performance.  Free up system memory that would to the integrated graphics card.

  You should be able to run two monitors of VGA and DVI ports.

  Paul

• Network controller not recognized by Device Manager

  Device Manager cannot recognize my Dell Inspiron 15 network controller. It is marked as an unknown device.

  Can someone please direct me as to where I could download the driver network controller, if indeed that is what is needed for the Device Manager to recognize the network controller.

  My Dell is unable to locate any available internet connection and I think it has to do with the network being not recognized controller

  Thanks in advance.

  Ibou

  Have you also selected the right operating system before downloading all the drivers from there?

  If nothing helps, you ask Dell Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.