Logo on request

Similar Questions

• Request Logo theme 17 slide down...

  APEX 4.0, I have a simple application, with a logo, the logo fails in the upper left corner, because I think it should, it slides down and right a little bit...
  
  Can anyone offer a simple solution for this?
  
  Link is here: http://apex-outsource.com/pls/apex/f?p=220:2:8694934790256722:
  
  Thank you
  
  Tony Miller
  Webster, TX
  
  A lady came up to me on the street, pointed at my suede jacket and said: "do you not know that a cow was murdered for that jacket?
  ' I didn't know there are witnesses ', I replied: "now, I'll have to kill you too. '

  Add a style sheet embedded for the corresponding page templates. After this line referencing the CSS theme:

  include:

  (There is a rule of fixed height for the header DIV that should also be replaced...)

• Request LOGO

  Hello
  
  I have a logo image defined at the application level in the component shared under the application definition. This will make logo appears at the top of each page.
  
  However, one of the page must be part of an iFrame. Therefore, I don't want to display this logo on this page. Logo inside the iFrame display would not look nice.
  
  How can I logo tun show off just for this page.
  
  Thank you
  R

  Hello

  Copy your template to new name and delete the string substitution #LOGO #.
  Then use the new model of the iFrame page.

  There is another way for example using application point
  Re: Set the time LOGO throughout the application

  The iframe page worth claire app

  BR, Jari

• Dell computer with windows vista. I turn on my computer it boots up to the blasck with the dell logo screen, then goes to a black scree requesting a password, how can I get around this.

  Dell PC. When I turn on the computer Dell black screen appears as always put then it goes to a black screen asking for a password.  I don't remember set the CMOS passwords.  Help, please

  Hello

  If she asks for a BIOS password, contact Dell

  http://support.Dell.com/

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• My request for Firefox that I use on my desktop computer - Apple Mac is infected affirmatively - what is called intelligent shopperhow that I get rid of this virus?

  I got what I thought, it was a real request to answer a survey Firefox on its service, and as I am very happy with Firefox that I wanted to communicate that fact. I soon relised however that despite the appearance authentic logos etc., I had been duped. Now everything I do seems to be infected by the present. Documents and publications on workplace are littered an icon of circular shape with an arrow to break the circle about two hours. When the cursor is placed over this, you will get a text box offer jobs and contact sites etc.

  Your help would be appreciated.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• my request of Hürriyet

  my request of Hürriyet is off. I can't return my mainpage in my iphone. My mainpage button is also disabled.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

• Progress bar of logo and gray MacBook Pro Apple.

  MY MacBook pro is not terribly old. Not more than 3 years is not new.

  It has the apple Logo and underneath is a gray progress bar. It loads thar bar take some time, then just stops almost as some laptops do when they update

  anywyas what I need help with this!

  Please?

  Thank you!

  make a gray screen:

  your hardware works basically

  the charges Apple logo:

  The Apple logo can only be demonstrated that it was brought in by the initial blob of software boot loader. See gray what apple means that your player has responded to this request and produced the right stuff. That this kind of things, then initializes, and to get more data in the drive Initializes the file system. The file system then try to mount the boot disk to read the files.

  draws a progress bar:

  If this bar remains for more than a very short time, the boot drive cannot be mounted, because the directory is damaged. Your computer is now running the equivalent of disk utility (ERD) while showing you the progress for about five minutes.

  -If this unit can be mounted after the repair, the boot continues.

  -If the drive cannot be mounted, your Mac will stop, because it cannot continue.

  What to do:

  Start to recovery and run utility disk (ERD) repeatedly until it comes clean or gets stuck.

  -If it comes clean after a few passes, try to start again

  -If it gets stuck, you need another drive to make progress. Get another drive and an external enclosure to maintain and install it on Mac OS from scratch. Then you can use it to try to save some of the files, if necessary. OR if you have a reliable backup, you can perform a restore on the new drive.

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• TECHNICIAN WENT, BUT DID NOT CONNECT THE HP LOGO AND THE CD ROM (DRIVE).

  Dear Sir, a technician went to know the C.Sharma that does nothing to solve the problem of bluetooth

  and my Windows 8, 64-bit laptop heats than noraml. He opened the laptop brushed the fan

  area and the left HP light up sign logo and Unplugged CD ROM drive. Again, the complaint of the raised times is

  closed without solving and this continues for the last 10 weeks or more. You are requested to

  ensure adequate to the problems suffered by me but quick repairs.

  Hello

  The best of the people who can help you is HP Tech call back and let them know and rule on the dispute over the priority...

• by clicking on the apple logo, menus and check boxes do not work on the first click

  Strange behavior from El Capitan OS X 10.11.1.

  When I click on the Apple Logo, menus, and check boxes, the action does not stick.

  To open the Apple Logo, the menu appears quickly but then folds upwards, as if I had not clicked.  Pretty well, click on the third, the menu opens.

  In the Finder, when I click on a menu like file, edit, or display, the menu appears, and then restores upward. Again, after three clicks in opens.

  In Safari, on a page Web, clicking on a checkbox does not stick. I need to click three times.  I when in Safari settings to clear the cache, I also checked the box to request the site "don't follow me." And even in the actual application of Safari, the box wouldn't fit.  I clicked it three times before the box stuck.

  Installation program:

  iMac 24 - early 2008

  4 GB

  El Capitan 10.11.1

  I changed the mouse, and this has solved the problem.

• LOGO! PLC driver based on LabVIEW

  1024 x 768 Normal 0 21 false false false EC ARE X-NONE X-NONE MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Tabla normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin; mso-fareast-language: EN-US ;}"}

  I'm happy because these last 2 weeks I worked to decode and interpret the communication between the LOGO! PLC and PC. Well... I finished this work and achieved the following:

  -Request the State of communication between PC - LOGO! PLC

  -Ask the State of the automaton (RUN/STOP The PLC status replies)

  -Force the State of the controller to the normal OPERATING mode.

  -Force the State of the automaton in the STOP mode.

  -Ask the current values (in real time) of all the channels of the controller:

  o 24 entered digital

  o digital 16 outputs

  o 8 inputs analog

  o 2 analog outputs

  o 24 digital brands

  o 6 analog brands

  o 4 sliders

  The application developed in LabVIEW performs the main function to communicate to desktop / laptop with PLC LOGO! (IE link National Instruments with Siemens... ja ja). The software performs the following functions:

  -Monitors and shows all the layers of the LOGO!

  -Choose the communications port.

  -L' user can save a file all data, each configurable period.

  I did several tests with different logical modules, and it has not given any problems.

  In the attached picture, I show you some topologies that can be implemented in knowing this communication protocol. I ask you to spread this to engineers and technicians who design and implement these MICRO-AUTOMATION systems, in order to offer this applicable to the monitoring system or data logger devicesoftware.

  I'm ready to be able to help

  

  Thanks for sharing...

  I send you a few interesting articles:

  -The PLC data frame depends on the version of the API

  MISTRA generation 4 and 5 do not send the data frame.
  The Generation 6 sends a larger data frame.
  The generation 7 mmmm. I do not know. Siemens is it has not yet broadcast in Latin America.

  -For what is PLC - PC data cable. This link can help you.

  Siemens LOGO PC cable pinout

  

  S ' with regard to orders...

  

  

  -Finally, with regard to the graphical interface

  

• Request: HP Pavilion DV6 2011 first Login wallpaper (6c50Tx)

  Hi everybody, this may seem like a rather silly request but...

  My laptop, after a reformat, in the first login screen would display a pretty blue HP custom login screen where I can click on my account and go into windows 7. The login screen background was something like that, without the big HP logo,

  

  However, unfortunately, the computer laptop after the first connection, removed by himself and is custom login screen returned to the annoying windows 7 login screen

  I went to C:\Windows\System32\oobe\Info\backgrounds, but could not find the blue login screen background

  Can anyone here download this login screen background? I want this on my login screen

  Too bad everyone, I found after digging through my recovery disk.

  In case someone wants to download those, they can be found here:

  https://docs.Google.com/file/d/0B6xCnhLl8qf8U3NycXZ4Y3JDbHc/edit?USP=sharing

  And that's what it looks like. Soon all the world!

  

• Windows XP SP3 upgrade freezes at widows logo screen during installation

  Windows XP home SP3 update installation hangs at logo screen of widows at the end of the installation process. I then have to restart the computer Windows XP load how fortunately but it then immediately starts trying to configure documentviewer and is unabe to find the installation files. At this point IE also will not work reports an error "the requested lookup key was not found in any active context"

  Now, I'm sure that the last problems are caused as a result of the installation of Windows XP SP3 update does not complete. I tried to do a manual update via Windows update, but after 105 update files that still has not solved the problems. I tried a system restore, but this also was not a success.  Can someone please help with advice as to how I might remedy the situation?

  OK, after more research I found that documentviewer.msi was the issue that prevents installation ended. The file is part of HP Imaging software, so I uninstalled the HP software & the upgrade was able to complete resolution of the problem with IE in the process.

• My computer displays the windows logo, but fails before I can log on, it keeps looping to the admin. password. by pressing the F8 key disables the system.

  turn on computer

  request password to connect

  Enter the password

  Displays the windows logo

  loops back to enter the password to connect

  If I press F8 repitedly monitor goes blanck (upper left) SYSTEM DISABLED

  You can get as an administrator (you know, fake out)?  If so, you can check in Applications under all users of Docs & settings for a kind of beginning of the app that is a failure; worst case, you can at least create a new user from there...

• Laptop Notebook screen black after the windows logo

  Hello

  I've had my laptop for a year now & recently installed AVG 2013. But when I started to run a full scan I get error of reference memory (keeps changing the process or service) and the system freezes or get a BSoD (kernel related). the only change I did was enable DEP for programs because I thought that I was associated with DEP. Then leave my computer, run chkdsk /f /r from one day to the next and now my windows 7 does not start after windows logo. Safe mode is inaccessible, which means get the same result if it was after finishing charge I get black screen where I can only move the mouse. I tried memory diagnostic as well as memtest86 + passing. Then performed a test drive (press ESC then gives you option to run the System Diagnostics) which only failure was the short DST (happen before, but don't really think much of it since windows 7 was always start) but the other test that was in the past of primary hard drive in the bios test. Using disc of windows 7 installation to fix this problem that left me no option because the startup repair does not give me a hard drive error. History of the system does not since it says it can not detect the previous operating system. I can use command prompt on drive here where I can see my old files to disk.

  Will display the error code when I get home from work & model number.
  -windows 7 64 bit home premium, 8 GB ram, 750 GB HDD, Intel core i5 processor

  to work so will later if requested model poster
  1. I have to reinstall the OS.
  2. is there anything I can do to get less back to my normal BONE to save the files that I need.

  Thank you

  Hello

  sad to know that your warranty has expired, you should have done the warranty extension is added value to any kind of failure that could happen.

  Errors can be due to several causes as moving a place at a different time unit is on, power outages sudden, virus, etc., there are several factors.

  I´ll leave you a link to when possible he looks there very important data :

  http://h20345.www2.HP.com/Nr/Rdonlyres/463052B0-1169-4409-A077-BF5F9DFEAFB5/0/HPHardDiskTroubleshootingGuide050617.PDF

  Any questions or doubts Don t hesitate not if need help or advise how to replace the hard drive has just said.

  Best regards