Logon key Bluetooth does not recognize mobile phones during the installation procedure
Hello
My Portege M400 with bluetooth stack 4.00.25 (bought in July 2006) doesn't recognize any mobile phone during the implementation of how to connect key wireless - except once with a foreign mobile PHONE a few days ago.
Mobile phones are also recognized as bluetooth devices, only the logon key wireless implemented the procedure shows:
"No mobile phone not found, check if bluetooth is enabled" (in German, so this formulation is my translation).
To my confusion, I tried to connect with someone elses phone to make sure that this isn't my phone (MDA) and this foreign phone has been recognised at the time. I'm not throughout the implementation of procedure, as I didn't want someone elses phone to log on my computer.
Now, a few days later, I decided along with that foreign mobile, just to check the operation of the entire wireless log on procedure, but now the phone that worked a few days ago is not recognized, too?
I can't find out what is the cause. Is there anyone who has an idea?
Help would be very appreciated.
Kind regards
Papak
Have you turned on the Bluetooth on the laptop with FN + F8?
Tags: Toshiba
Similar Questions
-
Satellite M30-241 IR - laptop computer issues does not recognize mobile phone
Hi experts,
hope you can help me.I would like to transfer photos from my phone to my mobile phone via infrared, but for some reason, both devices recognize each other (I have activated the function on my laptop and I think that I put in place the IR function on my laptop properly).
It's strange because my cellphone is able to communicate with all (and much more) cell phones/mobile phones, but it does not work with my private Toshiba laptop. I wonder why?
I have already transferred photos of different laptops to my cell phone in the past and it worked without any problem.On my laptop, I see that the IR light is on.
Who can help me? I don't know what I should do.
Your response is much appreciated.
Best regards
[Edited by: admin on 21 January 06 15:07]
Hello
Your device certainly has an IrDA port, and it should work properly. I put t know which IrDA light you mean, because there's no lights for IrDA. Always for wireless LAN and is not the same!
AFAIK, you can enable the IrDA feature in Control Panel. In this case, please check if this option is enabled.
In addition the IrDA port is placed on the front side of the laptop.Good bye
-
HO FOR LAPTOP 15 AC 122TU: MY LAPTOP DOES NOT RECOGNIZE MY PHONE USING THE USB CABLE.
I bought laptop 3 months ago. Her works are properly that day there at far but these last days, it can't recognize my phone using data cable which works properly before this question.
How can I solve this problem.
Try another port.
Normally, mobile phones are recognized as storage devices when you connect them.
It is not necessary to install the software of the phone.
-
iTunes does not recognize my phone
iTunes does not recognize my phone
See the troubleshooting steps in this document support. If iTunes does not your iPad, iPhone or iPod - Apple Support
-
I have a very strange problem.
I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.
So, I bought a new generic keyboard.
The problem
1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.
2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.
However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.
It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.
I tried many things
1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.
2. I tried using different USB ports on the desktop. He has not made a difference.
3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).
4. I tried to start Windows in safe mode. That did not help at all.
Any help would be greatly appreciated.
Hello Pauliw,
Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.
You can try the steps in the following Microsoft article and see if it works for you.
Note: There is place for Windows 7 also.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.
Click Start
In the Search box, type command prompt .
In the list right click on command prompt and select run as administrator.
At a command prompt, type the following command and press ENTER:
Set devmgr_show_nonpresent_devices = 1IN the following line from the command prompt, type the following command and press ENTER:
Start devmgmt.msc.When the Device Manager opens, click on view
Now, click Show hidden devices.
Remove all the entries that exist for the keyboard and the USB category.
Close Device Manager , and then restart your computer.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
iTunes does not recognize my devices after the last update
iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.
Help, please
Thank you
Cyana
Found this solution here:
Re: Does not recognize devices in iTunes on PC
works very well
-
My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.
Hello
What program are you using to burn CDs?
Follow the steps in the link below and check:
http://support.Microsoft.com/kb/324129
It will be useful.
-
My bluetooth does not recognize my bluetooth phone?
For some reason, my computer does not recognize my bluetooth phone. How can I fix this problem and how can I be sure that my bluetooth works on this computer?
Everything and allllllll help appreciated...
Rick
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection
How to setup a Bluetooth connection.
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
Set up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices
Using authentication keys compatible Bluetooth devices
The problems with Bluetooth devices
Read the above and, if necessary, contact the manufacturer of the phone.
See you soon.
Mick Murphy - Microsoft partner
-
I was updating the ios on my Iphone 5 and there is a message that says it does not recognize, and I have to reset to the factory settings. The only thing at this point, I can do is to turn the phone on and it displays the logo itune with an arrow pointing upwards and a port of loading. I can't use my phone at all now.
Hello
Make sure that your iTunes software is up to date before you try to update your iPhone.
Help here > get the latest version of iTunes - Apple Support
-
I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.
I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!
She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.
Is it possible to access something in the BACK or other so he could recognize the external monitor? What is finally toast?
Connect the external monitor to the laptop.
Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.
-
Windows XP Home edition does not recognize new HDD on the Qosmio G20
I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.Do you have any idea how to fix?
Thank youHello
Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.
On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.
-
T60 does not recognize xp disc in the cd drive
What could cause this?
Trying to install XP from the CD including defective HD have been replaced. BIOS recognize the new drive to HD & CD, but then error 'no valid OS found. By Lenovo Article here I've disabled dual mode for cpu & have the CD-ROM drive as first boot. The Lenovo's Article also said get the Intel 'Matrix Storage Manager Driver' file (for a "diskette"). But this isn't a boot disk. For use during the installation of the OS, so no help for me where OS even not recognised!
I had 2 machines which in time, so very little likely, it's a CD drive problem. & OC have checked it is not the disk.
Search on the Internet shows that many older posts on this problem, & perhaps not only T60. A lot of confusion, not a good solution. I mean shame on Lenovo. A matter of having what crazy!
You can put your Windows on a USB key. Boot from USB stick & install
-
computer does not recognize a dvd in the drive
Hello
My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD. This happens regardless of what dvd I insert.
Thank you very much
PAM
Try this; Restart your computer before trying again the disc that plays on your DVD player. If this does not work then there is only one possibility; your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive. He comes to the end of the mystery.
-
Vista does not recognize any disk in the disk drive
Vista crashed when I was loading photos on a cd. Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically. If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc. Any help gratefully received
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Does not recognize my internet connection for installation
never it don't let me do the final registration, because it does not recognize my internet connection
Needs of Internet cloud
Maybe you are looking for
-
ThinkPad R61 Fn keys do not work in Windows 7
Greetings! I have the following problem - after the upgrade to Windows 7, I only work volume controls, but not the combinations of keys Fn + Fx. The details are: (1) Fn key physically works - he worked on Vista (2) in order to have the volume control
-
Buffer with data multiple plots solutions
How to create a buffer zone of 5 min with multiple display of data plots? My data consist of a waveform (worms, dt and y) there is a 2D array. I tried to use the circular buffer found on the forum EITHER but who can't do several display field data. A
-
Help, please. My C7180 all in one is not printing black. I tried aligning the print heads and it tells me that something is wrong. How can I fix this problem or can I?
-
Hi all I'm going to HO and BR Office connected using DMVPN. It worked before but suddenly it has stopped working. HO is to have a contract line rental and the branch having DSL link. It will be very appreciated if someone could help me solve this pro
-
linking two accounts of vmware's mylearn
Hello guys...I have two vmware's mylearn account and I need to link / merge these accounts.Having the information with my full current account (this account is for work) and the other account have my transcripts reviews (this is my personal email acc