Logs archiving not required for recovery
Hello
I have a basic test of 200 GB with backup running every night. He made a full backup with a cleaning of the archiving log
The backup has not happened for the past 2 weeks and the archivelog filled the disk free space available.
Now, if I take a backup completes, or a backup of level 0 in the database right now, can I go ahead and remove the logs of archiving that were created before backups?
Unfortunately, archive logs are too big to make a backup of it to the backup location
According to my understanding of the current backup should have all changes recorded in the archivelogs created before she and I should be able to remove the archive logs
Thank you
Hello;
I remove all but the last two days and then do an overlap archivelog all;
And then do the backup.
And then ask the boss to drive more!
Best regards
mseberg
Tags: Database
Similar Questions
-
Hi Oracle Community,
I have a few databases (11.2.0.4 POWER 2 block and 12.1.0.2) with Data Guard. Back up this database with RMAN to ribbons, only on the primaries.
During the backup, sometimes I got RMAN-08137: WARNING: log archived not deleted, necessary for intelligence or upstream collection procedure
By reason of this global warning to backup status is "COMPLETED WITH WARNINGS". Is it possible to remove this warning, or perhaps change RMAN configuration to avoid the appearance of this warning?
Concerning
J
Where is the problem on these warnings? If you do not want to see such warnings, why not simply to perform the removal of the archivelogs in a separate step? For example:
RMAN> backup database plus archivelog; RMAN> delete noprompt archivelog all completed before 'sysdate-1';
-
Log archiving is mandatory for the integrated implementation of Capture?
Required for the implementation of integrated Capture ARCHIVELOG.
I tried to implement without archiving log and it seemed to work for a while. However, after you turn off the archiving log, got the error below and extract added. IC is supposed to use recovery logs is not it?
Extract get all LONG columns because the archiving mode is disabled.
No valid default archive log destination directory found 1 wire.
Database ERROR OGG-02057 The Oracle source is not properly configured to support integrated capture.
Mode ARCHIVELOG of OGG-02055 ERROR must be enabled on the Oracle database.
2012-10-12 08:56:32 ERROR OGG-01668 PROCESS ABENDING.
Receive your answer.I think that the log mode archive must be on for IC. It's oracle documentation
OGG-02055: ARCHIVELOG Mode must be enabled on the Oracle database
Cause: Integrated Capture is not supported for this Oracle database because in ARCHIVELOG mode is not enabled on this database.Action: Enable ARCHIVELOG mode on this database, or not use integrated capture.
-
RMAN-08120: WARNING: log archived not deleted, not yet applied watch
I get RMAN-08120: WARNING: journal archived not deleted, not yet applied watch on primaries
but when I run under query, I get the same result of primary and backup
SQL > select max(sequence#) from v$ archived_log;
MAX(SEQUENCE#)
--------------
44051
SQL >
Eve is a log switch behind only!Hello;
If RMAN tries to remove an archive which is not yet applied in standby log, you see the RMAN-08120
It's a good thing. As long as you don't have any archives for days on standby, you probably don't have a problem.
What are your RMAN settings for the database of the day before?
MetaLink Note: 361182.1 can help too. Or Note 1079953.1
Your main, make sure that:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Please consider closing some of your old issues to clean up the forum.
Best regards
mseberg
-
TMS 14.3 - PIN is not required for endpoints imersive
Hi people,
I am facing a strange with TMS 14.3 + driver problem XC2.2 + TP Server 3.1. This is what happens:
Schedule us a conference in TMS conductor like MCU, click an alias that points to the server TP conference bridge. The Conference has a self-generated PIN 6-digit. We use the type of conference "No connection", where all participants must manually dial into the Conference and insert the PIN.
Well, when at the request of conference starts, all participants can join the Conference successfully using ID number and then insert the PIN code. However, for the endpoints imersive telepresence (CTS 3000), when the user dials the ID number, it is connected to the conference without having to insert the PIN, TP Server don't ask the user to insert the PIN, endpoint imersive is automatically connected to the Conference after dialing the digital ID.
I have no idea why this is happening, and I confirm that this happens only for CTS 3000, the same problem does not occur for 500 CTS, for example, which is registered to the same CUCM with the same version of firmware. Extra points that I realized:
- This problem seems to be related to MSDS. Because, if I create an alias Chief conductor associated with a model of the Conference which has applied the PIN, so the problem does not occur. All the endpoints are required to insert the PIN, 3,000 CTS. But when planning through TMS, the problem occurs.
- The problem happen if the CTS 3000 is selected in the list of participants when planning or not. In addition, no matter if the CTS 3000 is the first, second or last member to join the Conference, the problem always happen in any time.
- No matter if I use Conference alias set of a driver to be "imersive" in configuration of TMS or alias of the common, the problem still occurs.
- In the web page of the server TP, I can see the Conference he indicated "PIN protected" information
Everyone here knows about a problem like this before?
I'd appreciate any suggestions really.
Concerning
Paulo Souza
My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."
CDETS ID is: CSCum29993.
VR
Patrick
-
Bit-locker will not unlock my drive and me is not prompt for recovery key or password I have both
That's my problem even let me not use a password to access or use a recovery key there is no way ether of these entry to unlock
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
Please go through the link below:
In Windows 7 BitLocker Drive Encryption: frequently asked Questions
https://TechNet.Microsoft.com/en-us/library/ee449438 (v = ws.10) .aspx
I suggest that you try to recover the bit locker drive on another computer with a volume protected by BitLocker on the drive to diagnose the problem.
When you unlock the BitLocker active hard disk on the other computer, the operation only available authentication shall be resumed. The drive appears in the element of the BitLocker control panel with an option to unlock the volume using the password or the recovery key.
If this does not resolve your query, I suggest you to ask your question in the TechNet forums.
http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking
Let us know if you need more assistance. We will be happy to help you.
____________________
Thank you best regards &,.
Isha Soni
-
I hate this new update. I basically can't use the browser more. I only need firefox to do things properly, but if she cannot do these things I can't use it
1. If firefox crashes (it does every 30 minutes it completely closed), then I need to be able to restore / recover all previously open windows when I start it back up again. There is no more.
2. I use the bookmarks toolbar all the time, but often it appears completely blank. So now, the only way I can see bookmarks is if I go to options and uncheck bookmarks toolbar option and reselect then toolbar of bookmarks.It's so frustrating and worse still make you sure you can't do restorations! It of insulting and makes me want to not use your browser. A browser is a tool not criticizing a toy, but you guys will not stop playing with it.
Also, older versions of the extension, meet bugs, you can refresh by using:
Firefox orange (or the Tools menu) button > Add ons > "gear" button > "Check for Updates".
For example, GM 1.5 (November 2012) vs GM 1.11 (July 2013).
-
Satellite U940-108 does not account for recovery media
Hello. My laptop came with Windows 8, but I upgraded to 8.1, and then to 10. However, I wanted to return to his original, since State it worked better for me. But the recovery partition was no more, so I ordered a USB recovery media, who came today.
However, no question I try, whenever I try to boot from the USB, the computer skips and boots 10 Windows instead. I don't know what to do, please lend me a helping hand. Thank you.
I finally managed to boot from USB and install Windows.
-
I get the following error message, but the updates always try to download. All solutions?
Hi HuntisChase,
1. did you of recent changes on the computer?
2. update you are trying to install on the computer?
3. do you have security software installed on the computer?
Method 1
I suggest that reset you the Windows Update components by default and then try to install the update.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2
If the previous step fails, so temporary disable the security software installed on the computer and try to install the update.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
-
password not required for internet access
Hi all
We use BBSM 5.3 Server to control our Wi - Fi access point in meeting for comments so that they can access the internet, but in a box, users can access the internet without any password. I don't have an idea on the BBSM server could please guide where should I look to fix the problem.
Concerning
Eliane
Also, here is a link to the 5.3 SP1 guide http://www.cisco.com/en/US/docs/net_mgmt/cisco_building_broadband_service_manager/5.3_service_pack_1/configuration/guide/configsp.html.
Lee
-
keyword - not required for import
Every time I have import images as a 'gray heron' keyword appears in each image - can't think why I turned it, so how can I disable it please?
See you soon
Graham
It'll be in the preset metadata you are applying to imports
-
ORA-38754: FLASHBACK DATABASE not started; required redo log is not available
Hello
I am getting below error when executing the activities of flashback. Currently we have backups, so when I tried the command flashback in RMAN my question solved.
But if I want to do the same thing using SQLPLUS what steps should I take?
ERROR:
ORA-38754: FLASHBACK DATABASE not started; required redo log is not available
ORA-38762: redo logs needed for SNA to SNA 20062842936 20062842926
ORA-38761: redo log sequence 4 in thread 2, 65 incarnation cannot
consulted
DATABASE:11.2.0.3.0 (UAT)
RMAN will automatically restore logs archived redo required for the operation of blowback when they are not present on the drive, while (as meyssoun said) when using sqlplus required archived redo logs must be available on the disc.
Concerning
AJ
-
Windows Update download but does not install for XP Pro SP3 - receives the 800704dd error Code
Reinstalled Windows Update agent, wups2.dll recorded, tried to use Microsoft Fixez_ the (claimed he fixed), but none of this seems to help install updates for over a year now. Here is a copy of the last part of my WindowsUpdate.log. Any help would be most appreciated.
-----------
2012-05-10 13:01:10:357 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
2012-05-10 13:01:10:357 4804 12e8 COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
2012-05-10 13:01:10:373 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:10:373 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:10:389 1108 c4c Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
2012-05-10 13:01:10:404 1108 c4c Misc Microsoft signed: Yes
2012-05-10 13:01:10:498 3084 ACC Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
2012-05-10 13:01:10:514 3084 ACC Misc = process: C:\WINDOWS\system32\wuauclt.exe
2012-05-10 13:01:10:514 3084 ACC Misc = Module: C:\WINDOWS\system32\wuaueng.dll
2012-05-10 13:01:10:498 3084 ACC DtaStor update service properties: registered with AU service is {7971F918-A847-4430-9279-4A52D1EFE18D}
2012-05-10 13:01:10:576 4804 12e8 COMAPI - added service, URL = http://update.microsoft.com/microsoftupdate/
2012-05-10 13:01:10:576 4804 12e8 COMAPI - COMAPI: IUpdateServiceManager::RegisterServiceWithAU -.
2012-05-10 13:01:10:576 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
2012-05-10 13:01:10:576 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:10:607 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
2012-05-10 13:01:10:607 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
2012-05-10 13:01:10:607 4804 12e8 Misc = Module: C:\WINDOWS\system32\muweb.dll
2012-05-10 13:01:10:607 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2012-05-10 13:01:10:732 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:10:795 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2012-05-10 13:01:10:810 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:10:857 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
2012-05-10 13:01:10:889 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:10:951 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
2012-05-10 13:01:10:951 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:154 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
2012-05-10 13:01:11:170 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:264 4804 12e8 Setup * configuration: check if it is necessary to update *.
2012-05-10 13:01:11:264 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
2012-05-10 13:01:11:295 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuweb.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:295 4804 12e8 Setup * IsUpdateRequired = No
2012-05-10 13:01:11:295 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
2012-05-10 13:01:11:310 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
2012-05-10 13:01:11:310 4804 12e8 Misc = Module: C:\WINDOWS\system32\wuweb.dll
2012-05-10 13:01:11:295 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2012-05-10 13:01:11:310 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:342 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2012-05-10 13:01:11:342 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:373 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
2012-05-10 13:01:11:373 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:435 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
2012-05-10 13:01:11:451 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:451 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
2012-05-10 13:01:11:467 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:529 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
2012-05-10 13:01:11:529 4804 12e8 Misc Microsoft signed: Yes
2012-05-10 13:01:11:545 4804 12e8 Setup * configuration: check if it is necessary to update *.
2012-05-10 13:01:11:545 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\cdm.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuapi.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuapi.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:764 4804 12e8 configuration NOT required for C:\WINDOWS\system32\wuauclt.exe update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:826 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:826 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:889 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:889 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wucltui.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:935 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wucltui.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:11:935 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:12:014 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups2.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
2012-05-10 13:01:12:014 4804 12e8 Setup * IsUpdateRequired = No
2012-05-10 13:01:12:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:12:232 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:56:217 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:01:56:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
2012-05-10 13:02:39:218 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0Problem has been resolved. The permissions on the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\SensLogn had to be reset. This enabled the settings of this key be restored and Windows Update works now. I suspect that this problem occurred initially because of a crash of an Acronis image training program that was causing problems.
Thanks for your reply.
-
Hello Tech community.
Is required for high availability and the DRS Vmware-AAM service? Has it been renamed with ESX3.5 U3?
On one of our ESX 3.5 U3 infrastructure, VMware Ha and DRS work very well, and the following list of services are started, view VMware-AAM
Here is an exit of an ESX 3.5 U3 system
service - status-all | grep running
crond (pid 1900) is running...
gpm (pid 1851) is running...
VMware-pass (pid 1942) is running...
ntpd (pid 1842) is running...
cimserver (pid 2452) is running...
snmpd (pid 1557) is running...
sshd (pid 4074 4037 1566) is running...
syslogd (pid 1321) is running...
klogd (pid 1325) is running...
At least a virtual machine is still running.
VMware VMkernel authorization daemon is running (pid 1911).
VMware-vpxa is running
webAccess (pid 1880) is running...
openwsmand (pid 2534) is running...
xinetd (1827 pid) is running...
Now on our production VMware MCC cluster ESX 3.5 Update 2 we do not find "vmware-aam" this service but HA and DRS work very well, and the logs in/var/log/vmware/MAA indicate that everything is fine.
service - status-all | grep running
crond (pid 2033) is running...
gpm (pid 1882) is running...
cmanicd (pid 2703) is running...
cmasm2d is running... [OK]
hpsmhd (1986 1955 pid) is running...
VMware-pass (pid 3502) is running...
ntpd (pid 1873) is running...
USE: Departure from OVCtrl | stop | restart | START | STOP | activate | Disable
USE: Departure from OVTrcSrv | stop | restart
cimserver (pid 3536) is running...
Ramchecker is not running
snmpd (pid 1745) is running...
sshd (pid 1861 1447 1754) is running...
syslogd (pid 1684) is running...
klogd (pid 1688) is running...
At least a virtual machine is still running.
VMware VMkernel authorization daemon is running (pid 3472).
VMware-vpxa is running
webAccess (pid 1984) is running...
openwsmand (pid 3642) is running...
xinetd (pid 1854) is running...
I did a few Google queries and couldn't find a definitive answer
The service of AAM is required for HA - it is not required for DTH
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
TMS Provisioning Extension required for Jabber Video
All,
I'd check that commissioning Extension is not required for TMS (14.x) allow video exterenal Jabber users to participate in a video conference on a microcontroller. These will be not registered in VCS video external Jabber users.
Thank you
John
I guess video Jabber users will be registered to someone else is VCS or using the free video by Cisco Jabber service? If so, that Yes, you don't need TMSPE, it is only necessary if YOU are commissioning and providing video Jabber service to others.
Maybe you are looking for
-
I can no longer access my work because you have disabled SSLv3
I need to be able to access the site of mytupperware.ca ! Your new version of Firefox won't let me and is more annoying because it is a part of my JOB!
-
the FF update section is missing from my newly installed FF14! My OS is Ubuntu.
the section 'Update of FF' is absent from my newly installed FF14! My OS is Ubuntu.
-
A copy of no-upgrade to iPhoto
I recently got an old mac running OS 10.7.5, (2006). iPhoto has been deleted and I would like to get a copy no-upgrade to iPhoto to install. Any suggestion would be appreciated. Thanks for the help in advance!
-
Can I start again with time capsule 2 TB existing using an existing iMac and a new iMac.
Trying to understand several iMacs and Time Capsule. Can I save a 2 iMacs on my Time Capsule? I am running AutoCAD LT 1015 on my new iMac, so far, I've not put back up on my Time Capsule. I'm worried it might be a problem with the existing backup
-
HELP, always pressing the SPACEBAR opens the file search application, which allows you to type a real pain.