Long property

Similar Questions

• Backup of property intellectual for iC-how long should it take?

  Hello

  Backup of property intellectual for iC-how long should it take?

  Was support for 12 hours and only at half way.

  The amount of data and what is your connection?

  There is no possible way to answer your question. How long is a piece of string?

• The previous records 1.1.1 Add-on is no longer works for the newer versions of Firefox?

  I asked this question once before (eight months ago), but never got a response, and no one else seemed to have the problem. I have been accustomed to the use of this module, called previous folders:

  https://addons.Mozilla.org/en-us/Firefox/addon/previous-folders/

  but he has worked ever since Firefox Version 22.0 (about eight months ago), is no longer. Its function is to retain the last 20 locations you have saved to and keep it in the menu bar drop down for easy access to addresses.

  I just reinstalled Windows 7 (I had other problems), and I thought that maybe it (the add-on) could function again after the re-installation... but it seems that it still does not. If someone knows something, or if someone also has this problem (it seems that very few people use this add-on or even knowledge), any help would be appreciated.

  The maxVersion property coded in the install.rdf file of the extension shows Firefox 14.0. So there is a good chance that it is not really compatible any longer, as Firefox 22 had changed the code download manager.

• My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

  Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

  I have some technical knowledge, but I'm not a COMPUTER guru.

  Ch6tty

  Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?

• the property attribute

  Hi all:

  I am a new learner of teststand, and I confused questions! There are two:

  1: property attributes

  TS help file tells that we can create a property attribute, such as step or sequence; and I don't know under what conditions we can use it,

  Show me the examples may be better; I was confused on this subject for a long time.

  2: the attribute named "TestStand Hyperlink"

  I find a sample for PDM and the attribute named "TestStand Hyperlink", and I don't know where it set?

  Which version of TS are you using?

  It seems to me that you are not aware of how to examine the attributes of propertyobjects.

  Research in the example, that you are referring to, the Locals.WebAddress, the Locals.ImagePath and the Locals.HTMLFilePath have an attribute of type container named "TestStand. You can check this on your own by right clicking on the variable (PropertyObject!) and select Advanced > change attributes...

  For implementation stuff, I've not found much too much. It seems to me that this is part of the modelsupport2.dll which allows to view the data in TS and then creates the string hyper link on the HTML page. Please note that to do this, the PropertyObject with attributes must be "AdditionalResults" of the stage. I fear that only the 'Hyperlink' attribute is implemented in the modelsupport2.dll.

  Norbert

• Name of variable or unknown property 'ReportFilePath '. Error in article "Runstate.Root.Locals.ReportFilePath". in TestStand

  Hi all.

  I used Teststand 4.2 until last week and set to level to 2013 TS. 4.2 I used the following to get the location of the teststand report:

  Runstate.Root.Locals.ReportFilePath

  
  but with TS 2013 this no longer works... is the following error message:

  Name of variable or unknown property 'ReportFilePath '.
  Error in article "Runstate.Root.Locals.ReportFilePath". in TestStand - get property .vi (String) value->

  I tried the following now with no success:

  RunState.Root.Report.Location

   

  So my question is how can we get the location (path) of the report during the test by program file please?

  Please find attached a copy of the report configuration screen:

  Hi Herb,

  By default, the path expression is evaluated once at the beginning.  However, there are 2 ways to force another assessment at the end:

  1. include the macro in your expression of path of the report.  This macro can only be evaluated once the executing State is known
  
  
  2. In the sequence to calculate the report of the NI_ReportGenerator.seq plugin path, set Parameters.ReportOptions.NewFileNameForEachUUTStatus to true before the first, if the statement is evaluated.  This replaces the UUTStatus macro check and force the revaluation.

  You might also be interested in this idea exchange post associated with this request:

  http://forums.NI.com/T5/NI-TestStand-idea-exchange/add-option-to-force-the-report-file-path-expressi...

  Let me know if it works for you!

• Tables property multi-column Listbox property node and value

  I'm putting a common use case I have with MCLs in a nice utility reusable VI, where I want the user to select zero, one or more elements of a MCL and decant the content selected for an another MCL. The best way to achieve this is by the way a reference to my source and destination MCLs to the Subvi and then access the properties Value and Ref.

  However... knots of property for the strict MCL types return a Value equal to a scalar I32 property, rather than the table of I32s I need for 0 or more modes of selection.

  There are a few approaches that I can use here:

  -Move in the control of the appellant VI values table

  -Disconnect the data type of the control, which means that statements of value a Variant, then the variant to the data in the table of I32

  -Set the reference to a generic control type, then do the above

  -Convert the reference to a MCL contained inside the Subvi

  The first would be my favorite long term, which allows me to group the utility in a polymorphic VI. The second option would be my favorite, I know that the Subvi is going to live within a set of exclusive MCL utilities.

  Did I miss something? Is there a way simpler, easier to do this?

  In fact, you can create a polymorphic VI for each type of strict.  See the sample code attached or published excerpts.

  Table Type code:

  

  Scalar Type code:

  

  Main VI.  Average review is broken because of a type mismatch.

  

  I hope this helps.  I can be paid in congratulations or solutions.

• Error: The property node (arg 1) in .vi VISA set up a Serial Port (Instr)

  Hello

  I've seen people once they have gotten this error, but none of them really apply to my situation.

  Right now I use LabVIEW example code to read from a device manufacturer. This device is connected using a Tripp Lite USB adapter series (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=2430) for the connection from the PC to device with RS232. The adapter works fine when using the software prepared in advance (not LabVIEW) given by the manufacturer and the COM port is seen by LabVIEW. When I run the program, I get the property node (arg 1) visa set up a Serial Port (Instr) .vi (I've also attached the VI but it's a standard VI I got of LabVIEW). I get this error despite the fact that I use the same COM port, who has worked with the manufacturer's software.

  I have attached manual of Protocol RS232/debit BUS (not sure if this applies) that requires the device. The device is a mass flow controller whose operating instructions is: (http://nemu.web.psi.ch/doc/manuals/device_manuals/Bronkhorst/917023--Operation%20instructions%20digi...

  I'm using LabVIEW 10.0.1

  Any help is appreciated

  Try to restart the PC and then try the LV version before trying other software.

  I have seen thrid party serial interfaces work on the first try but fail when you switch to another application. It was as if the pilot did not know that it was no longer the first process.

  Ben

• Is there a quick shortcut to create nodes of property?

  Hello

  I'm trying to avoid local variables and instead use property nodes, because they are supposed to be the best in terms of performance. But the creation of a property node takes a long time. I have to carefully click on the point of the façade (or even find it in the block diagram) and navigating through a maze of menus and submenus.

  Is there some shortcuts where I can just select an object and use certain key combinations to create a property node (the default property could be the last opportunity this object property)?

  I don't remember if there is some special subforum or a thread dedicated to tips and tricks (I checked the wiki for that page), so posting here.

  Thanks in advance!

  
  

• Insert a property root data in a text object

  Hello

  I am writing a script to create a default report with a variable number of pages.

  For this, I use objects DIAdem to create these new pages, but I got stuck trying to correctly configure some textbox.

  I would like to display a property of data root in all the pages, don't forget that pages are created as the script goes.  "In theory", this value is a user input (get via a DlgBox when the script runs) so what I did was to assing the value: Data.Root.Properties ("Report_Number"). The value to the new text object (by using the TXTTXT command).

  By doing this, the new report shows the value (as a simple text, no longer tied to the property) which is fine as long as the user knew this value. But here's the problem, sometimes this value cannot be specified until the last moment so that users may have to change and now it's not that simple to change the value of the property, and then click Refresh. He or she would need to go one by one in order to change this "number".

  I am looking to start a new modeless dialog box or a new buttom that opens/closes all these objects refreshing their text of values but move before I would like to know if there is something easier to keep the link between the value of the property and the text object.

  p.S. I use 11 DIAdem

  Thank you

  Javier

  Javier,

  I think that I thought about it!

  You simply send the property textbox as variable instead of just under form of text. Here is an example

  TXTTXT = "@Data.Root.Properties(""Report_Number"")." "Value".

  You can see that I added the @ on each end of the property and also quote the string so that the script he interpret correctly. I also had to quote the string Report_Number so that the VB script would interpret it correctly.

  Give that a try and let me know how it goes - I think it should work fine for you. After you run the script, I can change the property and then refresh the report and see the updated value.

• Bytes to Port property node. When to use and when not?

  Hi all

  Ive frequently used bytes to port property node performing bed series and have not experienced any problems.  I've heard mixed on this subject reviews and I would like to know when to use and when not to use it.

  Thanks for any input.

  I will start by when it should not be used.

  When there are (as readable) ASCII data to come through and it is separated by a termination character.  Select the stop character and read more bytes than you ever expect a given message.

  When there are binary data, but a protocol where you know clearly how the message package is put in place.  In this case, you want to disable the stop character because any octet can be given legitimate and be interpreted as the stop character.  With these protocols, if you know the message is always X bytes, read X bytes.  If the message is of variable length, but the Protocol is set to tell you low for a long time the message is, and then make partial readings.  So if each message starts with 2 bytes that says follow X bytes.  Then read 2 bytes, which converted to a number, then read this number of bytes.

  When to use:

  The only time will really use bytes to the port is if you use a terminal of the installation type.  Just enter and display on-screen what never happens happened at the port since the last time it was read.  When you don't care where are message breaks.

  If you use bytes to the port and care message breaks, then you're obligated to all your new message concatenated to a string, you store in a shift register and each reading analysis through data to determine if you have a complete message and valid.  If you do not, do nothing and go back and read more.  In fact, you will need to run through the chain of data several times in a row before coming back to reread in the case where the message ever resulted in a single reading packets.

  The vast majority of applications falls into one of the above situations.  The last situation is not as common, and if you use bytes to the port with a system of e-mail that has defined a defined protocol or packages, you do a job more in programming to maintain a software buffer of data as well as the hardware buffer to the serial port.

• property of the mouse to the image control

  In LV 8.5 I noticed that if you reset your image to the default control (using the menu drop-down), the position property of the mouse no longer works, it will always return 0.0 no matter where the mouse is in control.  You must destroy and recreate your image control to fix right here.

  Perhaps this problem has been fixed in later versions of LV but I didn't know any documentation of the present.

  Good afternoon Garvacious,.

  When you say that the pop-up menu, I guess you want to tell the menu that is displayed if you right-click on the control.

  I just tried this in LabVIEW 8.6.1.  My position of mouse cursor reads 0.0 when the mouse is over the control and -1, -1 when the mouse is not over the control.  It is a bug.  I have filed the appropriate internal documentation (Corrective Action Request #167102), while R & D is aware of the issue.

  Thanks for letting us know about this behavior.  I'm sorry for any inconveniencce this bug you has done.

• Strange behavior of "RT Get CPU Loads.vi"; first call lasts a very long time!

  I spent a considerable time of debugging a new application, after that we decided to migrate to the new architecture. When a more common coding errors where eliminated, the application started running smoothly for short periods before suddenly freezing until the moment where the connection to the target RT has been lost.

  I finally understood as a Subvi, which returns the data to the system (use of memory, the cpu load, etc.) lasted if long run than the queue to feed this consumer loop filled with tasks causing eventually the memory fills. I have done some testing of the Subvi separately and noticed that "CPU Get RT Loads.vi" takes forever to run the first time, it is called after a target restart and then quickly runs during subsequent calls.

  Is this known behaviour? Other ways to solve this, except 'RT Get CPU Loads.vi' call during initialization?

  The VI has an entry "session in? If she uses the system of screw configuration, he may have to create a session on the first call you can do outside of your loop. If not and you have installed system configuration tool, you can try to use the nodes property to get the CPU - in more recent versions of RT, I think that the function you are using is obsolete.

  Can you post a snippet of your code / the VI?

• Word: selection of nodes of property-> Ref.Number is 0!

  Hello

  I'm trying to set a property of Word in LabView. The problem is that the property selection node always gives me a 0 return ref.number!

  This is why I can't put anything because of an error that is generated later. I use the version of word 2010 with the SP1 of 2012 of LabView.

  Someone knows how to fix this? Is a registry key missing, perhaps? Joined a demo-vi.

  Thanks in advance

  The code works OK for me.  I open MS Word, type some text, select text, run your VI and it returns without error.

  Of course if I run that without open MS Word or any selected text it returns 0.

  Edit:

  Also makes long MS Word is open tracks VI OK (even with no selection)

• Why overlays take much longer on grayscale images single precision

  Hello

  I came across a rather curious problem. In a Visual inspection machine, we create 8-bit 16MPixel images. These are then calculated in single precision images. After processing the image display us certain types of images of result to the user. Here, the user can use the mouse on the image display and gets a reading of the current image of the sector where the mouse is currently positioned. If the image is RGB or U8, fine.

  However, if the display holds one of the 32-bit grayscale images things become quite slow, by a factor of 5 to 10 about. Now I can see that 32-bit is quite a bit more than 8 bits, so I guess an increase in lap by a maximum factor of 4 times.

  Since the images are large enough, an update takes about 90-100 ms with the 32-bit image, while the same action requires little more than 10 to 20 ms with U8 and same RGB. Because the movement of the mouse is caught by a structure of the event, all movements are processed and finally the tail to cause a blockage of the software that all these events are processed. This leads to ridiculously long 'freeze' time in the software, sometimes as long as 20 sec, as I saw through a log of the events has been implemented for this purpose.

  Attached is an example of code that shows the unusually long processing time for overlays on SGL-images. If there is any suggestion, I would be happy to read them. Thanks in advance.

  Falk

  After in-depth discussions with German support NOR we have understood that it is not primarily the recovery action that consumes time, but rather my screen image update after each action of the event. As my goal was to provide the user with the most recent image information available as close to the position of the mouse as possible there is no another way to do it without compromising the goal that I have explained.

  Several alternative ideas, we had (some don't work well) are briefly explained below:

  1. Use the property of the band of the art instead of creating an overlay
     • PRO: ultra fast response because no update of the display image is needed, easy to implement
     • Cons: Stationary, takes advanced band rest a while to appear, requires the user to stay in the same place on the screen for a while, the band faded unpredictable (in my test) and reappears only after leaving and returning to the display picture more keep the mouse pointer for a few seconds
  2. Use an extra (classic style) indicator string to display the desired text in the desired position
     • PRO: also very fast
     • CON: kind of hassle to the code, because it implies the correct calculation of the desired position of the channel indicator using the position of the window of the façade, the image appears indicator and the position of the mouse. Actually not hard I know, but nothing that see you with your mind on your dinner... You'll need a bunch of different reference types here to acquire the position necessary to window VI, indicator to display Image and mouse properties
  3. As 2 but without moving the indicator
     • PRO: fast and easy to implement
     • CON: not as easy to use since the indicator is stationary somewhere around the display of images and not at the mouse position.
  4. copy/typecast image SGL U8 image and move forward with overlays
     • PRO: the response is improved to the level that I used
     • CON: 'problem' with the update of the display image remains and therefore increases the response time the picture gets
  5. Use the property of the information string Image instead of creating an overlay
     • PRO: would be faster than 1., since no required update picture
     • k.o. - CON: property seems to be Read-Only, so no changes defined by the user of the text is possible

  I guess my choice will be 2.

  If anyone has other ideas on this subject, I will be always happy to hear about them.