Long run Insert Session

Similar Questions

• How to stop a script of long-run, or leave in the first place?

  How to stop a longrunning script to stop or start in the first place. It does in itself. I don't know what it is. The only reason for which we know that it is running is because from time to time, we get a box popping up to say something like "this can't start/work due to a long-running script. Is this something that is important for our computor or is she something harmful, or simply unnecessary?

  Hi Anna-KarinEdvardsson,

  1 did you change on your computer before the show?

  2 are. what scripts you referring?

  3. when exactly the script starts?

  I suggest you to set the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After the installation of updates to the clean boot follow step: 7 article to reset your computer to normal startup.

• Error: BT Yahoo is not available due to a long-running script. How can I remove it?

  Original title: a long-running script

  Why constantly to make the message-' BT Yahoo is not available due to a long-running script.

  How can I remove it?

  Why constantly to make the message-' BT Yahoo is not available due to a long-running script.

  How can I remove it?

  a. on the Tools menu, click Internet Options.

  b. on the Advanced tab, click to select the checkbox disable the script debugger .

  c. click OK

  Error message: "a script on this page slows down Internet Explorer runs slowly.
  http://support.Microsoft.com/kb/175500/en-us

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

• I frequently get a pop up that says "' web page addresses do not cause of long-running script." "

  * Original title: pop ups

  I frequently get a pop up that says "' web page addresses do not cause of long-running script." "  It's maddening.

  It's all web sites that do, or just a specific or both? If its just one or two sites, try them as 'compatibility mode' - http://windows.microsoft.com/en-US/internet-explorer/use-compatibility-view#ie=ie-11

  If this does not help, it occurs to these sites if you run IE (assuming you're using IE) "mode without modules? ( [Internet Explore (No. Add ons)])

  If still no joy, then see if anything in this article allows --- https://support.microsoft.com/en-us/kb/308260#cause it is a long read but has a few things to try for script errors in Internet Explorer.

  The default base heal - use another browser like Mozilla Firefox - https://www.mozilla.org/en-US/firefox/new/

• I want to uninstall my new imac CS4, because CS4 is no longer running.

  Hello, I want to uninstall my new imac CS4, because CS4 is no longer running.

  The problem is: before I sold my old mac, I put all programs in the trash, without no deinstalltion.

  The new mac is installed with a backup and so, if I want to run photoshop, par example, I get this:

  

  ... and so its impossible for me, uninstall CS4.

  Can someone help me?

  Excuase my bad English:)

  Error "Licensing has stopped working". Mac OS

• Disable the input from the user during the long running process

  Hello
  
  I use JDev 11.1.1.4.0.
  
  When the user clicks on the 'save' button, I have to call a procedure stored prior to validation. This procedure takes about a minute to complete the race. My problem is, while the process is running, the user can click or change the values in the page. Is there a way to lock the page until the process is complete and ok to return control over the user?
  
  Thank you
  
  Bones Jones

  Another example:
  http://www.gebs.ro/blog/Oracle/Oracle-ADF-glass-pane-for-blocking-user-input-in-case-of-long-running-tasks/

  Thank you
  Nini

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• With the code to run the session timeout

  I saw this problem asked and addressed on many other furums, but nobody came with a response, yet.

  I am trying to disconnect a user and end their session when they leave my site. How can I know when they leave my site? The only way I know is to wait a few seconds, and if they make a request to the server, they are gone. Disconnect them.

  I tried to just do a < cfajaxproxy > call to a cfc that returns just their application.sessiontimeout to 5 seconds, but it does not work. The session has no expiration time. I need to connect the outside user and the disconnection notice in a newspaper on the server and a logfile (not my idea. "This is the requirement of the customer.) I can get the cfc that I call by the tag < cfajaxproxy > to run log entries and I could kill the session here, but I need to give the page time to update and see if the user requests a page of my site or on an outside website. The problem is that if I do those things within the time of announcement of EFA execution with a counter or loop dlay, the page is not unload until the end of the call of CFCs. So, no matter how long lasts the delay, the session is already cleared bfore that loading of the next page.

  It's the old problem of want to logoff user when they leave the site, but not having is not a way to know where is located the landing page or the ability to delay a server action while the browser passes to the next query. If I can get a delay at work, the user can request a page on my site and I can reset the session before timeout. If they go to another site, eut session outside and they disconnects.

  Any help will be GREATLY appreciated. I spent days on this.

  Thank you

  CFGunny

  I had completely forgotten this post. I know it is very old, but I thought I'd post the real answer. The key was I needed establish if the user has left my site, unloading not only the current page and disconnect them if you leave my site. It is in fact not possible because there is no way to determine the URL TO which the browser will due to browser security restrictions, so I don't know if it's going to another page on my site or on another site. It's a little more complicated that just end a session when the page unloads. I didn't disconnect the user or kill their session each time that an empty page.

  The answer was to write a 'onUnload()' script that records the time of the unload event and the user's session ID (I actually used our user ID and put it in the database) and write a scheduled task that verifies all entries in the database against the current time and disconnects any users having a longer period, say 30 seconds. In order to avoid disconnecting all users (running every two minutes with a maximum time of 30 seconds, return all users), I wrote a script block in the onRequestStart in Application.cfc that checks the database for a record for this user and function, if the record exists, compares the time registration at the present time (now()). If the difference is greater than 30 seconds, the recording is marked and, if still connected, the user is disconnected and have to log in again. This ensures that the user is disconnected after thirty seconds, because the scheduled task runs only every two minutes. If the time is less than 30 seconds, the user continues without interference. Thus, if the user went to the site for more than two minutes, the scheduled task handles the database and actions disconnect. If the user is off-site for more than thirty seconds, but less than two minutes, the script in the onRequestStart function does the work.

  Thirty seconds time was a requirement of the customer and gives enough time for the next page to load, even if the user is on a slow network, but is short enough so that the user probably not going to another site, first. This method also allows the detailed collection of metrix, including the user, how many times they visit, how long they stay (on each page and an agregate), what URL, they came, etc., as well as normal metrix on-site as what pages they visited. These metrix became very important to the customer, is an agency of the federal Government and that they must justify their existence every year to get funding for next year, which part was my paycheck.

  I apologize to not include the code, but I left this project a year ago and do not have the code, not more. If I did it again, I'd probably write it a little differently (cleaning and CFScript), anyway. I hope this helps someone.

• can you run two sessions of firefox, in privacy and confidentiality not in a mode

  You can run two Firefox sessions, one in privacy and confidentiality not in a mode.
  Basically, in chrome, I can connect facebook with 2 different account, I opened got chrome FB and login (account1), then I click on ctrl-shift-n and go on FB and login (Account2)
  Here, the question is, is it possible with firefox?

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How to use the structures of the event for long-running tasks

  I created a state machine that scans a cluster of Boolean controls in a State of 'home '. Most of the States run a Subvi or two in ~ 100 ms or less.

  However, a State run for 10 seconds.

  The code works but the user interface is limited because the controls are outside the cluster because they provide inputs to the structure of State machine case but do not cause changes in the State. In other words, I all orders cluster stacked vertically on one side of the main panel and do not have the flexibility to move the controls to the more intuitive positions on the Panel.

  My question: How can I convert this code in a structure of the event and keep this long term 'event' and prevent that the operator by clicking another button event during the execution of this event?

  Thank you

  You say you have controls outside of your main code... You should really put these inside and manipulate them in a State of your state machine is initialized. This allows you to make changes to the code easier and limits of line entering your outside loop.

  You can do different things to lock the user.

  You can disable specific controls so that they can't be clicked or edited.

  You can use the palette of the mouse to define the busy cursor and disabled again once finished, I do this a lot during treatment when my code something loads the user just clicked.

  One of my favorites is to set a Boolean value in your data that passes through you event titled structure "disable mouse." When the value is True, a mouse down event will effectively reject the event, clicking on disable. I also added an event mouse move where if the bool disable the mouse is set to True, it moves an indicator of string with the mouse by telling the user why it is disabled.

  If you want more specific suggestions, I suggest to post an excerpt of your code, or attach your screws, so that we can better help you.

• Long running newsletter

  My Newsletter is running long. Just wanted to see if someone has encountered this problem during the development of a newsletter - I have a lot of content and it runs more than a normal e-mail page in Eloqua. How can I get the email to adjust the size and incorporate all the content?

  Hello

  I think that is the best solution for enewsletter long;

  1. make sure that you don't have more than 10 items in your newsletter.

  2. keep the content short & brief but have a button "Read more" to direct to your web page to read detailed information.

  3. This will help generate good traffic to your site & high readability to your newsletters.

  4. you can increase the page size of your newsletter by clicking Tools > icon page style > and increase the width & height adjustment for the page.

  

  By following the above with the correct target segmentation, I got great rates from 70%.

  Good luck!!

• Long-running query

  I have a query that has been running forever. I ran this query yesterday and he finished in 100 seconds (which is normal for this scenario). But today it's forever. The plan of the explain command seems good and I made sure all the tables used in the query have updated its stats. Can someone help me please on other factors should I look to find the root cause of this long term query.

  OS: Windows 7

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  Hi Vpolasa,

  You can diagnose it the problem with help from under article by arup nanda: -.

  Article from tech s/n

  Thanks and greetings

  Maxou

• Run several sessions Jdev 11.1.2

  Hello:
  
  Thanks for this post by looking at...
  
  Is it OK to run Jdeveloper multiple times on the same machine under XP? For example: I start Jdeveloper and start to handle the project. I want to watch project B then I start Jdev and open the project B. basically, I want to look at the two sessions of the Jdev at the same time. The two instances of Jdev are 11.1.2 in the same House of middleware. Is this ok? I will damage the project A or B of draft with two instances of JDev running at the same time?
  
  
  Thanks for the help.

  Yes, you can run two instances of JDeveloper at the same time.
  However, note that you can also open two projects in the same JDeveloper and have two opened files at the same time - this will require less memory on your computer.

• UDM for long running sql

  Hello
  
  I intend to use enterprise grid control manager to create a UDM for the following sql which alert me for the sql that runs to learn more then an hour for all the basics of ideas on how to do this
  

  SELECT 
          substr(swn.sql_text,40),
          ||'SQL is Running on Instance ' ||s.inst_id || 'Since '|| ROUND(sl.elapsed_seconds/60) elapsed_mins,       
  FROM   gv$session_longops sl,
  gv$session s ,
  gv$sql swn
  WHERE  s.sid     = sl.sid
  AND    s.inst_id = sl.inst_id
  AND    s.serial# = sl.serial#
  AND    s.inst_id = swn.inst_id
  AND    s.sql_address = swn.address
  AND    s.sql_hash_value = swn.hash_value
  AND    sl.sofar  <> sl.totalwork
  AND    sl.totalwork <> 0
  AND    round((sl.elapsed_seconds)/60,0) > 60
  order by 7

  Published by: user9243284 on June 7, 2010 03:48

  Could you tell us please my useful answer?
  Thank you

• Jdev 11 g, error when you try to run the session bean

  Hello
  
  I created a session façade for my entity beans. I don't know what happened but when I try to launch it I get the error below. I restarted my computer.
  
  Someone has an idea?
  Thank you.
  
  
  Redeploy the Application...
  < 7 May 2009 22:27:22 CEST > < WARNING > < hats > < BEA-149124 > < failures have been detected all introducing deploy task for application 'wd_tickets '. Error is: "[Deployer: 149164] modification of domain lock belongs to another session in exclusive mode - where the deployment operation cannot continue." >
  weblogic.management.ManagementException: [Deployer: 149164] modification of domain lock belongs to another session in exclusive mode - where the deployment operation cannot take place.
  # Incomplete deployment. # May 7, 2009 16:27:23
  oracle.jdeveloper.deploy.DeployException
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
  at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
  at oracle.jdevimpl.runner.adrs.AdrsStarter$ $5 1.run(AdrsStarter.java:1365)
  Caused by: oracle.jdeveloper.deploy.DeployException
  at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
  at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
  ... 11 more
  Caused by: oracle.jdeveloper.deploy.DeployException: deployment failed
  at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
  ... 13 more
  # Failed executing wd_tickets request because of the deployment error to DefaultServer.
  
  Published by: amcgator on May 7, 2009 13:38

  Once you start your weblogic Server

  Enter the URL: http://127.0.0.1:7101 / console

  username: weblogic
  password: weblogic

  hope this helps,

  Thank you