long writing time
Hi friends,
in my project of mtech, I made an image using some calculation.but when I want to write it in image, needs a lot of time why?
concerning
Ragil
It is not only the calculations that you make in this loop, you make image also writes for each iteration.
-Instead of this, you will need to use imaq write only once.
Tags: NI Hardware
Similar Questions
-
I can't open all the Web sites in firefox(version 25), its long loading time, help please
Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update
-
What is the difference between them?
Timer.Schedule (task TimerTask, delay, long) vs timer.scheduleAtFixedRate (...)
The difference is the way it handles trolling and catching up.
If schedule() is used and a performance falls behind his scheduled execution date, consecutive executions are also delayed.
With scheduleAtFixedRate() If execution falls behind, he'll try to 'catch up' and do a run right after the other.
-
Satellite Pro U400 - how your last long battery time
Hello everyone!
I bought a toshiba laptop (satellite pro u400), but I think he has a very short range, about 1 h.
Someone like that have a computer toshiba laptop?How long your battery last time?
Thank you!!!
GLO :-)
Hello
I have a U400 and I also use it with the battery.
I use it for surfing the internet and writing
Execution of the laptop with battery I always set the brightness to the minimum, and in this case I can use it for about two hours.If the screen light is set to max and the HARD drive and the CD/DVD drive works then your battery time will likely decline at a time.
So, as you can see the battery time work depands defintialy on the use of the laptop...
Welcome them
-
Qosmio F60 - 11F - Long startup time
I have a Qosmio F60 - 11F and I install Windows 7 ultimate 64 bit, when starting my computer laptop take a long time to get on the desktop and over time increase the problem.
After that I format my laptop with Windows 7 ultimate 64-bit (SP1) with all the drivers only.
Now when I push the power button to get office it's take 5 min, I can't used my cell phone during this time, the led HD is running (non-stop) and charge of the mouse pointer.
Hey,.
> Once I format my laptop with Windows 7 ultimate 64-bit (SP1) with all the drivers only.
That means with all the drivers only?Qosmio F60 was delivered with Windows 7 Home Premium 64-bit, if you have installed Windows 7 Ultimate from a normal disk of Microsoft. If you do this, you must install all drivers and step by step tool yourself because Windows 7 is doesn t contain all the drivers.
So have you installed all the drivers for the Toshiba driver download page?
In addition, you should test it with the factory settings. On Toshiba Recovery disk, you find an image pre-tested with all drivers and tools. If you use this disk everything will work correctly.
-
HP pavilion slimline s5-1114 (win7) Long loading time
Hi, my s5-1114 recently got extremely load times long(2-5min) when I start a program (games, internet explorer, etc. etc) for the first time, after I turned on the computer. I tried to load the pc in safe mode and the LAG disappeared but I can't seem to find the problem.
Thanks in advance.
Hello
Please try this link might help you solve your problem.
-
PC Windows 7 after authentication of login take longer startup time for show desktop
My PC takes longer to show desktop. It's really annoying. I want ot fast to the top of my PC. According to me, it's a starter problem or due to a lot of useless data. Below more details on my PC Configuration:------------------Information System------------------Time of this report: 06/01/2012, 21:32:21Computer name: USB - PCOperating system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111025) - 1505Language: English (regional setting: English)Manufacturer: Hewlett-PackardModel: HP Pavilion dv4 Notebook PCBIOS: Default system BIOSProcessor: Intel (r) Core (TM) 2 Duo CPU T6600 2.20 GHz (2 CPUs), ~2.2GHzMemory: 4096 MB RAMAvailable OS memory: 3038MB RAMPage file: 2180MB used, 10856 MB of available spaceWindows Dir: C:\WindowsDirectX version: DirectX 11DX setup parameters: not foundDPI setting: Using System DPISystem DPI setting: 96 DPI (100%)DWM DPI Scaling: disabledDxDiag Version: 6.01.7601.17514 32 bit UnicodeHi GOWTHAMU. S,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Disconnect all external devices and try to start the computer.
Method 2: Run the troubleshooter of performance.
Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
Method 3: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 4: Follow the steps in the article.
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
Method 5: Update the chipset and other drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
Need a help. Please, I beg you. the project long render times.
Hi there everyone!
If im new in the world of Adobe AE. I need help. Watched a 100 videos and searched, but... I did an audio visualization for my youtube channel and want to restore the mix of 50 min. My PC config is 8 GB ddr4, skylake quad intel. GTX 960 m. Then, when I try to make it take so long! 24 seconds to display a preview is about 5-7 min. and for 50 minutes, it would be around 7hours! my laptop from heating even after 7 min of render. How can I speed up the rendering, and I have to do with the size of the video? I made in adobe encode. h.264 - 8 mb full HD - advice read on youtube too for the best settings. People please help
Have a great day and tons of positive emotions!
Unless your 50-minute video is one-shot with effects applied to the same shooting and there is no cuts nuts is to try to do this in a single computer in AE. According to effects applied to only one made of several minutes, that a framework can be normal and expected. The usual workflow for a project of 50 minutes would be to break into small pieces, if the effects on each segment are complex or very slow return, then you make each room when this is done. If the effects are simple and fast make you can consider using Dynamic Link to each piece in Premiere Pro for final assembly. More than 90% of my comps AE are less than 10 seconds, because most of the shots in the films that I produce are less than 10 seconds. Several times my compositions contain dozens of layers and can take up to four or five minutes a frame to render. Most comps are effectively created composite or motion graphics restitueront at the rate of 3 or 4 frames per second. Nowadays about half of my work is 4K, and I produce masters 4 K that are made to the HD for final delivery using Adobe Media Encoder to create an h.264 MP4.
I'm just guessing that you have very long shots in your comp with a sort of music visualizations. If this is the case, every time that the music changes or there is a break, you break the project down into a separate model and then make this model in a lossless format visually. Because your system is currently taxed I would use the Cue Render to render these masters of the production. When you have all the parts made I would bring them together in the final project in Premiere Pro, which is the only way you'll be able to get an overview of real-time editing. Then use Premiere Pro to make the file available. This will save you time in the long run because rendering Cue and the output module will make faster than Adobe Media Encoder because TEA running AE in the background to do the rendering, it is less effective. The probability that a rendering of 50 minutes will fail repeatedly during rendering is very high, if all this makes your system resources. This will also give you time to check each section to see if you like it before moving on to the next section.
I hope this helps. I would never and have never tried to edit one to animate a sequence in AE who was only a few minutes longer because it is simply too inefficient. I put a whole feature in AE to make color correction, but he is already gone and it is a layer that already went to a master of production. Therefore, unless all your effects are applied to a single video track for 50 minutes together, break the project and make it into pieces.
-
Long loading times, XPguest - opensuse 11.1 host
Ref: workstation 6.5.1
openSUSE 11.1
After compiling the modules using the tip of raid3868
(mv/usr/lib/vmware/modules/binary/usr/lib/vmware/modules/binary_old)
This is the behavior of VMware
1. If I load a VM with opensuse 11 (it's just one of the guests I have available) it loads and runs like when I was with opensuse 11 as host. So in my opinion works well
2. I have that I load a VM with XP, the initial screen of XP is fast and then takes a long time until the final screen comes and XP loads, as if XP is looking for drivers etc.
After it loads, it works as before (way OK).
Time of loading for XP using opensuse 11 = 43.5 sec
Loading time for XP using opensuse 11.1 = 5 min 20 sec.
What is the best way to open a session to the events I have described? I tried to start mode full screen and the whole system froze and the VM doesn't work anymore, so I had to make a new. I'll try again.
I'm sure it's a problem with the kernel, and it may also appear in fedora 10 etc. I am interesting to solve because is the only thing now is can't me upgrade to opensuse 11.1
Happy new year!
Terry =-
Post the vmware.log file and the file .vmx since the directory containing your comments.
-
ATTENTION: newspaper writing time
Hello
so many warnings:
This means that writing to disk is a concern for our system?mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 5010ms, size 1KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 18930ms, size 3KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 4210ms, size 1KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 3800ms, size 3KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 1520ms, size 0KB
Thank you.user522961 wrote:
Hello
so many warnings:mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 5010ms, size 1KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 18930ms, size 3KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 4210ms, size 1KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 3800ms, size 3KB mydb/bdump/mydb_lgwr_8716376.trc:Warning: log write time 1520ms, size 0KB
This means that writing to disk is a concern for our system?
Thank you.
These messages can be ignored.
Also check * file LGWR is followed by production with "WARNING: 540ms journal entry time, size 5444 Ko" in 10.2.0.4 Database [601316.1 ID] *. -
Hello
I want to run the loop for a long time in my application. If I do it in a few seconds I get a warning message like "Script of this film do flash player to run slowly. you want to cancel the script. " How to overcome this. Please tel me how to overcome this.
Kind regards
Kelifaoui has
file - > settings-> flash-> Script Date tab limited publication (change this)
-
Ridiculously long download time Sierra.
I did not start the download Sierra yesterday until after I am home from work here in the Central time zone, thinking the manic rush put to the test the Apple servers would be more after 5 to 6 hours.
That I was wrong.
I started the download and was initially thrilled to see it would take less than 30 minutes. But none. After about 25% of the download, I was informed the time needed for downloading amounted to 5-6 hours, and in the course of the next hour, the time required regularly rose at the top, no kidding, "someday, 11 hours."
So I called my ISP and after I restarted my computer, my router and my modem, I ran Speedtest (see below).
http://www.Speedtest.NET/my-result/5649708170
I then restarted the download, and in a few minutes, the total download time estimated again exploded within 30 minutes for well over a day.
I have a life, so I gave up the download from one day to the next, with the hope, once again, that the race would be seriously reduced by the time wherever I tried again this morning.
Ha! I write this, now the estimated download time is "two days."
I am happy that Apple is a success of these days (I remember the dark days of the mid - 90s), but C'mon - it is of nuts!
What gives?
It's a popular download, is a large download, it is free to download but just as importantly, it's a download of TCP/IP, so, to do a checksum for all data sent. It's not like a UDP stream movies Netflix or XBL HD where the data does not have to check so it is much more complex. Your ISP can be the fastest thing out there but it is still limited to the Apple bandwidth limited when something this big and with all these factors and expected goes live.
-
Long boot time and the gel boot drive selection window
Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).
My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.
I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).
I always have Apple Care left. Help, please. Thank you.
Hi Herojeff02:
It seems that you have some SSD problems.
Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support
You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.
See the following links: OS X: on OS X Recovery - Apple Support
Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support
If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.
-
How to restore an application from a date longer than Time Machine?
Hello! I had to throw my old Firefox browser. Something was wrong in the middle of an upgrade and it broke. Rather than download a new copy on the net, is anyway that I can go in my Time Capsule via my Time Machine to restore? This way I can get all my settings and bookmarks. It would save me a lot of time! Or is this kind of thing not stored in Time Machine? I went back a few days and could not find Firefox in applications. It was like she didn't show what I have now. Any suggestions? Thank you.
This way I can get all my settings and bookmarks.
Mac OS X is a multi-user system. The user files are stored in separate directories for system files. System files are not changed by your settings that apply to them in system folders, your settings are stored in preferences files in your own user ID.
Feel free to re - download or restore from backup any version of Firefox that you like. But their preferences are in your own ID user, not in Applications. Download a new version does not change your settings at all.
-
Hey guys,.
I have a clip attached.
This code snippet runs in a loop timed with maximum speed 500 ms = 2Hz.Only LIA values must always be the most recent. I2C and analog values are not sampling that fast in another loop, so it's ok, if the last value is saved two or three times.
How do I set the timeout, that the loop is still able to finish in time?
Any other suggestions how to improve performance?
Kind regards
Slev1n
In these situations, I generally use a global variable or the library of the current value (CVT) table to contain the latest data instead of the notifier. You don't need to follow a reference in this way, nor do you need to close. A little easier.
Maybe you are looking for
-
I found a cottage on HomeAway last year and stayed there. Then suddenly I could no longer find my computer, it was as if she did not exist on the site. But others may see their computers, and I can see it if I opened a private window. I have no probl
-
Satellite P300-1BB (PSPCCE) - good software for the FN key features needed
Hello I upgraded my laptop for Windows7 64 bit and now I need the OSD software that appears by pressing the FN button. Unfortunately, I was not able to find it in the downloads section. Thanks, Gerd
-
KB954430 installs whenever I stopped Vista Home Premium 32
It again me successfully, but there no date every time I stopped since 02/08/09. Why is this and how do I stop? I have not updated each time out. Thank you Hugh
-
Data Execution Prevention is blocking programs
I am an avid player of spades on Pogo.com. I was very frustrated to find that I am not able to play because the Windows Explorer is stopped by the data execution prevention program. It is a new problem (in the last 3 days) which seems to after a Wi
-
Storage space does not connect to a drive
Whenever I have restart my computer storage does not reconnect to one of the disks. If I take the cover off of the computer unplug and reconnect the drive (all voltage) it recognizes the drive, but I know that the drive is connected, it is recognized