Look at a 'page by page' over the computer brochures

Similar Questions

• HP officejet 4500 G510n-z: impossible scan of pages of the computer

  I'm unable to scan pages from the computer. I replaced the 10 window XP operating system. In the 10 window it is not scanner in my hardware list.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series-G510/3919445/model/3986394#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• I am disabled and I use Windows speech recognition. If I work in Word or any text editor a document of 50 pages, how the computer for to jump me from page 1 to 10?

  Well, I started using Windows speech recognition, and everything went very well, is a great tool for me because I can't type on the keyboard, why I have disabled hands. I happen to work with Microsoft Word 2010 on the platform of Windows seven, a project of 50 pages and constantly say I need to change the page from one to ten, or five to twenty years. My question is if there is a way to say loud and clear to the computer I have jump off page one ten, twenty to forty years and so on.

  Well, I started using Windows speech recognition, and everything went very well, is a great tool for me because I can't type on the keyboard, why I have disabled hands. I happen to work with Microsoft Word 2010 on the platform of Windows seven, a project of 50 pages and constantly say I need to change the page from one to ten, or five to twenty years. My question is if there is a way to say loud and clear to the computer I have jump off page one ten, twenty to forty years and so on.

  Victor,

  In Word 2007 and 2010, the Page indicator is in the lower left corner of the document window. I said, "show numbers". Number 85 flashed on the Page and I say: '85. " Then the discovery of a dialog box replace opens the tab go to say something don't like, "sign more (give a short break) space 10" or "minus sign (pause) no space 20" after entering the + 10 or - 20 etc. say, "go to" ".

  Marty Markoe,
  2010-2011 Microsoft MVP

• No control over the computer for printer 8600

  My printer 86600 suddenly has no control of the computer. For example, no option to scan and email, scan and save etc. What happened and how do I get that back.

  Thank you for that updated information.

  If you only have these options as you said, I would recommend uninstalling/reinstalling the HP software. Also, what is your operating system on your computer? Windows. Please follow these steps:

  First of all, please uninstall the software by following this document HP uninstalling the software of the printer. Then, you want to clean your Temp folder. Please follow this document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system and download the software. If you need help to install the software, I'll give you a document from HP on install the software of the printer on a wireless or wired (Ethernet) network.

  Please post your results again. Have a good night.

• How to look at two pages at the same time

  While working on master pages and normal pages, it would be useful to have side by side.

  is it possible to do?

  You can do it from Windows-> arranges and you can take each window and adjust the width and height according to your need.

  

• If I have a page on the computer and to open another page it starts outsmall and I have to type a Max to come to full page why?

  When I have a page up and to open another page it will appear to half way and I have to type max sign so he could see the full page.

  Hi AngeliaNovel,

  · With what application this behavior is displayed there?

  To work around this problem, try the steps:

  a. open the window you want to open in maximized and close by pressing the cross of the window button.

  The next time you open the window, it would open an enlarged page.

• Taken over the computer privacy corrector

  Problem - privacy corrector pop - up yesterday to know where and is forcing quiting any program that opens after about 15 seconds. Impossible to update when I tried to update provider license.

  How can I remove this program?

  Hello

  You can access the Taskmanager in Windows or Safe Mode? CTRL + SHIFT + ESC?

  If so then complete the process on protect.exe to see if this allows more access. There may be other thugs
  loaded both parts.

  You can search by protect.exe? That type in the box search-> protect.exe and if it appears
  above, then right click top and REMOVE. (You might have to finish first on this process).

  Another way to complete the process in this regard is to use Process Explorer from SysInternals - Free.

  Run process Explorer and right click Protect.exe and KILL PROCESS. Remember there may be
  be other processes or services are running that are among the thugs so looking for some
  them.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• image of first page to the browser

  Hello

  My AppendFrontPage.VI uses the function in addition to the report cover page to get the other VI cover page. AppendFrontPage.VI creates the new HTML file in a report, then it adds two hyperlinks in the report. The image of the first page is added to the report and after that, the report is saved to the directory to overwrite an existing file. The directory where the HTML file is saved is published as a web server. If the idea is to get the image of first page to web site and implemented to date as all the minutes. In the program, this means that the whole AppendFrontPage.VI is "infinite loop" as well as a timer.

  But here's the problem: the function Append cover page of the report seems to create a temporary image files which are not temporary. The VI replaces the HTML code to each cycle loop, but 'temporary' image file, like this example: LVtemp034555102214, will not be replaced. So the VI creates a new image every time. I do not want the files to plug in my hard drive. Can someone tell me how to replace these files, or if someone has a better way how to train my program?

  I also tried to make the program with node as Front Panel: Get Image method of appeal. It works, but the image will appear in the web browser if I use the IP address pointed to the HTML file in the address bar. It only works if using the address of the file directory. You know, only locally. But the idea is to access the web page besides the computer, the web page has been done since.

  Need help, please

  Thanks in advance,

  Aaalright, I managed to solve this problem on my own.

  If none of the solutions not needed, thank you

• When I start my computer, I get a screen that tells me the EULA has expired and I need to call the computer of the company rented to renew, however is not a rental?

  When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a password to enter, tells me that I have to wait 10 minutes, then it resets a chipset and allows the computer to, and then starts. I can't even take a screenshot of this message, because what it comes to control over the computer. I've scabbed virus and comes back clean. All this shows is a name of agent: HLZR4G1, then the Version 5.6.5 (Build-a-1028). The password was Wanker that seemed fishy, now the password is numbers and letters. Can someone explain this to me?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Speaker Bluetooth is recognized in the computer. In "playback devices" bluetooth is not an option.

  Hi, I'm looking to plug a bluetooth speaker. The computer recognizes very well, but when it connects just connects like a helmet. In "playback devices" bluetooth is not an option. Any help is very appreciated

  Original title: connect the Bluetooth speaker

  Hello

  What is the make and model?

  Note: Check if the Bluetooth speakers are listed in Device Manager.
  
  Method 1: Run the hardware troubleshooter and check if that helps.
  Follow the below mentioned article:
  
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
   
   
  Method 2: Follow the steps mentioned below:

  (a) right click on the speaker in the taskbar icon.
  (b) click on playback devices
  (c) right-click on the empty space
  (d) select Show disabled devices and Show disconnected devices
  (e) see if the Bluetooth speakers are visible.
  (f) if they appear, select and make a default device.

   

   
  Method 3: Install the software that came with the speakers, then check.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
   
  Note: The article also applies to Windows 7.
   
   
   

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• What is the icon on the far right that looks like a circle and a small number that changes depending on the page of the site? in the lower right part of the

  I wonder what this thing.
  It's an icon to the far right of the page next to the search toolbar. It has the shape of a circle with a number on the bottom right edge. The number changes depending on which tab I opened. A blank tab has no number. This page gives a 1. I have another open page which translates as a 4. The number shows white in a little orange box. The circle is described with a thick black line. What does this icon?

  Thank you.

  John

  Hi John, I'm guessing that this icon is created and updated by an extension. I do not know that, though. Maybe something that keeps track of the Tracker, like Lightbeam? Have you tried pointing your mouse over the icon to see if a ToolTip is displayed, or by clicking on it?

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• How MSN and Bing take over my computer and not allow me to change the default fox web page... Are they not actually a virus?

  During the loading of a free software download - MSN and Bing took over my computer at the same time, I loaded the free software. I did a system restore and they cannot be deleted. When I go to options on Foxfire to select the web page by default, they will not default to Mozilla web page. (He returned as a shaded light gray color - when I put the default - with no real http: address appear) I get the message "they try to reset your web site you want to block the change in your web page"- but it does not work. Bing and MSN are so desperate for business that they have built a network of hackers who force people to accept they crappy products. Fox needs to write software that will stop these vultures to return to our home page of web. I now have to delete Fire Fox and reload, and then reset all the functions of my add-on. It should be criminal when everyone including Microsoft needed a change in someone's computer that they did not. How to remove MSN and Bing from your computer? Your current software is to be more mounted and burned them. Turn on programmers that hole in your software's cheese at best - what perverted very hard for the little guy because of these idiots. I let anyone ever mess with my computer - it drives me to the extreme to rid my computer of the intruders. I hope that Bing and MSN will be destroyed by this scam. I have of course they give advice to software vendors free to sneak their software in the computers of unsuspecting people. They are always responsible.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  A search engine Bing associated addon could be in Firefox, like the so-called default tab or Search bar, Search Toolbar, Search Helper, default handler or Bing.

  Remove search Helper and extensions of Bing bar
  
  Uninstall search Helper
  
  By default, Manager 2.2

  Also, after support for threads, Bing has been installed through various modules not Microsoft, including:

  StartNow toolbar (remove by using the control panel)
  
  PDF Lite (remove under the Extensions)
  
  Vuze Toolbar (remove under the Extensions)
  
  BigSeekPro / Hypercam toolbar (remove by using the control panel)

• HP CP4525DN print black all over the Page

  Hello, I have a HP CP4525 that prints black all over the page with the exception where there are printed words.  I reinstalled the fuser unit and tried to swap black ink.  It's a brand new printer from the box.  I have attached a picture of one of the printing as kind of hard to explain what the question.

  Any help would be appreciated.

  Edit - added an another attachment with the print quality test pages

  Has started sharing a printer of spare parts in another office.  Turns out be the formatter Board.

  Thank you.

• How can I get the image of the Web page when my mouse over the icon in the taskbar?

  I used to get the image of some Web pages I look at one when I spent my mouse on the browser used in the taskbar, now, I only get the Scripture that says what pages are open, how to get back the images? It facilitated visually for me to see.

  Hello

  Are you referring to the feature Aero Peek in Windows 7?

  You can use Aero Peek to take a quick look at other open windows without clicking away from the window you are currently working. For more information, see Preview an open window on the desktop using Peek.

  You may experience this problem if PEAK Aero is disabled on the computer.

  If you can not see the effects of glass window, or if you are unable to use Aero Peek and Aero Shake, use the Aero troubleshooting tool to diagnose and fix the problem automatically.

  Solve problems Aero in Windows 7

  http://support.Microsoft.com/kb/976170

  You can also go to the Control Panel - Performance and options (find it by typing in the search box) - and set for the "look better".

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.