Look at the symbol when I press cmd R on an Imac

Similar Questions

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• I uninstalled norton sec., but it always appear in the list when I press start. as a result, I can't install kasperky, what can I do?

  I uninstalled norton sec., but it is still present on the list when I press start. so, I can't install kasperky dry what can do to remedy this?

  Hello

  Download and run the norton removal tool

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  If you then still problems contact norton

• Mouse Sonar: Registry key? Specify the location of the pointer when I press the CTRL key

  Windows 7 Home Premium 64-bit
  (But this feature existed for several years, at least as old as XP).

  In Control Panel mouse pointer Options tab, there is a checkbox option:

  [b] "see the location of the pointer when I press the CTRL key". [/ b]

  When this field is selected, pressing the CTRL key causes concentric circles around the mouse pointer, to help you find it quickly. HE often called mouse Sonar.

  I want to activate this option, but my mouse control panel does not have a pointer Options tab. I installed a mouse of third-party providers of hardware, software and drivers, and they hid the pointer Options tab. If I knew that the registry key for this option, I can activate it via regedit.

  Someone knows the active registry key or disables this option?

  This option is stored under this registry key:

  HKCU\Control Panel\Desktop\UserPreferencesMask
  However, it is coded to store several variables, and this direct modification is very far from a supported scenario.  You can try to install the Microsoft IntelliPoint software instead.

• Creation function Interior package Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back

  Hello

  I am trying to create a function inside the packaging.

  In the Package BODY I've defined the function, but in the definition of the package, it gives me syntax errors.

  • Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back
  • Error (39.1): PLS-00103: encountered the symbol "END" when waiting for one of the following values: start the function pragma procedure subtype type current cursor removal exist prior

  What can I do wrong here.

  Thank you

  Ken

  Inner package BODY:

  / * FUNCTION to form the query * /.

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2

  )

  RETURN VARCHAR2

  AS

  varSQLQuery VARCHAR2 (10000);

  BEGIN

  varSQLQuery: = "test query";

  RETURN varSQLQuery;

  DBMS_OUTPUT. Put_line (varSQLQuery);

  END UDF_FORMQUERY;

  Definition of package inside:

  create or replace PACKAGE BODY MY_SQUERY

  AS

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  VARCHAR2 IN_SRC_CONDN( )

  RETURN VARCHAR2

  AS varSQLQuery VARCHAR2 (10000);

  END MY_SQUERY;

  your package definition is incorrect, you have included the part of the declaration of the variables of the function in the package definition. It should be like

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2)

  RETURN VARCHAR2;

• PLS-00103: encountered the symbol "" when expecting one of the following values:

  Hello
  
  When running under pl/sql block get below error...
  
  Please advice me where I am wrong
  
  DECLARE
  T_DATE date: = sysdate-813;
  v_last_closing_book_bal_amt (19: 4) NUMBER: = NULL;
  v_txn_amt (19: 4) NUMBER: = NULL;
  v_max NUMBER (5): = 100;
  NUMBER (5) v_count: = 1;
  
  BEGIN
  
  FOR I IN 1.30
  LOOP
  
  WHILE (v_count < = v_max)
  LOOP
  Insert into AI_ODS_TXN (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,CR_DR_IND,BOOK_DT,VALUE_DT,TXN_KEY,TXN_TYP_DE,TXN_CAT_DE,TXN_CD,TXN_AMT,FUNDS_TYP_CD,RPT_REF_TXT,INSERTED_TS,UPDATED_TS,BANK_ABA_NO,BENE_PARTY_BANK_ID,BENE_PARTY_BANK_NM,BENE_PARTY_BANK_ADDR_LINE1_TXT,BENE_PARTY_BANK_ADDR_LINE2_TXT ,BENE_PARTY_BANK_ADDR_LINE3_TXT,BENE_BANK_ID,BENE_BANK_NM,BENE_BANK_ADDR_LINE1_TXT,BENE_BANK_ADDR_LINE2_TXT,BENE_BANK_ADDR_LINE3_TXT,DETAIL_LINE1_TXT,DETAIL_LINE2_TXT,DETAIL_LINE3_TXT,DETAIL_LINE4_TXT,DETAIL_LINE5_TXT,FED_CLEAR_TS_TXT,CR_DR_PARTY_NM,CR_DR_PARTY_ADDR_LINE1_TXT,CONTROL_NO,INTERMED_BANK_ID ,INTERMED_BANK_NM,INTERMED_BANK_ADDR_LINE1_TXT,INTERMED_BANK_ADDR_LINE2_TXT,INTERMED_BANK_ADDR_LINE3_TXT,ORG_BANK_NM,ORG_BANK_ADDR_LINE1_TXT,ORG_BANK_ADDR_LINE2_TXT,ORG_BANK_ADDR_LINE3_TXT,OGB_BANK_NM,OGB_BANK_ADDR_LINE1_TXT,OGB_BANK_ADDR_LINE2_TXT,OGB_BANK_ADDR_LINE3_TXT,INSTRUCT_BANK_NM,INSTRUCT_BANK_ADDR_LINE1_TXT ,UNCLEAR_DT,UNCLEAR_ITEM_IND,INSTRUCT_AMT,INSTRUCT_CCY_CD,SENDER_CHARGE_LINE1_TXT,SENDER_CHARGE_LINE2_TXT,SENDER_CHARGE_LINE3_TXT,SENDER_CHARGE_LINE4_TXT,REGULATORY_TXT,BANK_REF_TXT,EXT_REF_TXT,YOUR_REF_TXT,FED_DR_ACCT_NO,SWIFT_STMT_NO,NDC_CD,BAI_CD,SWIFT_CD,CNS_SEQ_NO,LOAD_NO,UPDATED_WORKFLOW_NM,EXCHANGE_RT,ORG_BANK_ID ,OGB_BANK_ID,INSTRUCT_BANK_ID,SRC_MSG_TYP,CLEAR_DT,JOURNAL_NO,SERIAL_NO,SWIFT_STMT_DT,CR_DR_TXT,SUPP_DETAIL_TXT,GVC_CD,BOOKING_TXT,ITEM_TYP_DE,ORG_BANK_ACCT_NO,RETURNED_DDT_TXT,DETAIL_LINE6_TXT,DETAIL_LINE7_TXT,DETAIL_LINE8_TXT,DETAIL_LINE9_TXT,DETAIL_LINE10_TXT,DETAIL_LINE11_TXT,DETAIL_LINE12_TXT,DETAIL_LINE13_TXT ,DETAIL_LINE14_TXT,EXTRA_BCS_DETAIL_IND,OGB_BANK_ACCT_NO,INTERMED_BANK_ACCT_NO,CR_FLOOR_LIMIT_AMT,DR_FLOOR_LIMIT_AMT,MT942_TOTAL_CR_AMT,MT942_TOTAL_CR_NO,MT942_TOTAL_DR_AMT,MT942_TOTAL_DR_NO,INTERIM_FINAL_TXN_IND) values ('DBBRUSSELS','825-0004665-47','EUR','C',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), '2009102201521911232172' + v_count, "TRANSFER", "TRANSFER of FUNDS", "SWF", 100, "VT", "I000424906808216", to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), null, null, null, null, "AAAAA35AAHNLEITEN GMBH", null, null, null, null, null, null,'IHR KT 0000002056/200000044 ', 4 NR.5100000835 09.03.09/N','ETTOBTR. NR.510000', ' 0872 6.627,01 10.03.09/NETTOBTR. 4', 559, 21 NR.5100000891 11.03', null, null, null, null, null, null, null, null, null, "DUROPACK AG 1235 WIEN", "XXN33XXXXROHNLEITEN GMBH", null, null, null, null, null, null, null, null, null, ' n, null, null, null, null, null, null, null, ' PET326000108PAGE AND ', 'I000424906808216', 'I000424906808216', null,' 102/1 ', null, 195, 'TRF', null, 0, "w_MT940_PROC - Type: first STMT ', 0, '15150', null, null, '940', null , null, null, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'), 'C', null, '051', ' GUTSCHRIFT ELEKTRON. ", '76VB', '501057590',"QQQ34DQQQROHNLEITEN GMBH ", 09/NETTOBTR. 5.093,33 NO.5 ',' 100000899/12.03.09/NETTOBT','R. 2.302,58 NR.5100000917 / 13.03.09/NETTOBTR «,» (831,37 no, 'R.5100001006 2', null, null, null, null, null, null,' n, null, null, null, null, null, null, 'F');
  COMMIT;
  
  v_count: = v_count + 1;
  
  END LOOP;
  
  
  
  
  
  Select nvl(last_closing_book_bal_amt,0) in the v_last_closing_book_bal_amt of ai_ods_acct_tbl
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = "EUR";
  
  Select nvl (sum (txn_amt), 0) in the v_txn_amt of ai_ods_txn
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = 'EUR' and book_dt = to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM');
  
  
  
  Insert into ai_ods_BOOK_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_value_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, VALUE_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_CATEGORY_agg (TXN_CAT_DE, BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ("TRANSFER of FUNDS", "DBBRUSSELS", 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  
  Insert into ai_ods_acct_bal (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,BOOK_DT,INTERIM_FINAL_BAL_IND,LOAD_NO,BOOK_BAL_AMT,VALUE_BAL_AMT,COLLECTED_BAL_AMT,TOTAL_DR_AMT,TOTAL_CR_AMT,TOTAL_CHECK_CR_AMT,TOTAL_LBX_AMT,TOTAL_IMPREST_DR_AMT,TOTAL_IMPREST_CR_AMT,ONE_DAY_FLOAT_AMT,TWO_DAY_FLOAT_AMT,THREE_DAY_FLOAT_AMT ,FOUR_DAY_FLOAT_AMT,MTD_AVG_COLLECTED_BAL_AMT,YTD_AVG_COLLECTED_BAL_AMT,INSERTED_TS,UPDATED_TS,UPDATED_WORKFLOW_NM,OPEN_BOOK_BAL_AMT,SWIFT_STMT_DT,SWIFT_STMT_NO,MISSING_STMT_IND,SRC_MSG_TYP,TAG_60F_DT,TAG_60F_AMT,STMT_TYPE_IND) values ('DBBRUSSELS','825-0004665-47','EUR',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), 'F', 0, v_last_closing_book_bal_amt + v_txn_amt,.
  v_last_closing_book_bal_amt + v_txn_amt, 0, 0, v_txn_amt, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), ' w_MT940_PROC - Type: first STMT ", v_last_closing_book_bal_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'),' 102/1 ', ', '940', to_timestamp (17 April 09 ',' DD-MON-RR HH.MI.) SSXFF AM'), v_last_closing_book_bal_amt, '=');
  COMMIT;
  
  T_DATE: = sysdate-809;
  T_DATE: = T_DATE + I;
  v_count: = 1;
  
  END LOOP;
  END;
  /
  
  
  ERROR
  *=====*
  
  T_DATE date: = sysdate-813;
  ***
  ERROR on line 2:
  ORA-06550: line 2, column 7:
  PLS-00103: encountered the symbol "" when expecting one of the following values:
  constant exception < an ID >
  * < a double-quoted delimited identifiers > table double Fedya Ref *.
  char time timestamp interval date binary national character
  NCHAR

  Hello

  First of all, you said T_DATE as DATE data type

  v_date                                      date := sysdate -813;
  

  And then you try to use a timestamp like this

  to_timestamp(v_date,'DD-MON-RR HH.MI.SSXFF AM'),
  

  T_DATE's DATE, not VARCHAR2.

  You should try CAST to convert the TIMESTAMP DATE. Or. first convert the VARCHAR2 DATE, then by TIMESTAMP.

  Kind regards

• Why won't my Macbook Pro start in recovery mode even when I press Cmd and R

  Why don't my Macbook Pro starts in mode of recovery even when I restart and press Cmd and R or also I tried Cmd Alt and R

  Is the EXACT year/model of your MBP a mid-2009 as the current OSX?

  Depending on the circumstances, you may need to use the drives original installation to help you MBP rerun.

  Ciao.

• Address bar does not go to the address when I press on enter

  I just upgraded to Firefox 4.0.1. When I click on an address or enter an address in the address bar and press ENTER on my keyboard, it takes me to the address, the tab remains empty, as I him did not do anything. I have to click the small arrow to the right of the address bar so that he can go anywhere!

  How can I fix it? I went to tools > Options menu and check the box which says "When I open a link in a new tab, switch to it immediately", but that did nothing.

  Thank you

  AVG Safe Search has been known to cause this problem. Turn it off (modules, click on it, click 'Disable') and restart Firefox, and then test.

  Check with AVG for an update.

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Shockwave Flash 10.1 r102
  • Next-generation Java plug-in 1.6.0_23 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update the Flash plugin to the latest version.
     • Download and SAVE to your desktop, so you can find the Setup program later
     • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
     • Once the download is complete, exit Firefox
     • Click on the installer, you just download and install
       • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
     • Launch Firefox and recheck your version or up to the download link below to test the installation
     • Download and information: http://www.adobe.com/software/flash/about/
       • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
       • Use IE to go to the site above to update the ActiveX to IE
     • Download manual installers.
       • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
       • Note the separate links for:
         • Plugin for Firefox and most other browsers
         • ActiveX for IE
  3. Update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
  
  
• See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
• Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
• Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
• Java test: http://www.java.com/en/download/help/testvm.xml

• Change the State of the button when you press another button

  Hi all

  I have a simple enough question, but just does not know how I can do this... I'm trying to switch between the two types of waveforms (sine and square) on a graph using buttons and a box structure.

  I currently have two buttons A and B. When I press A, it turns into real and displays the waveform 1. When I press B, B turns into real and displays the waveform 2. However, when B is true, I still have a permit as true (hurry)

  I can't figure out how to change the status of a return to false when you press B and vice versa.

  I am fairly new to Labview so if anyone can refer to a position where it is already the answer or point to the right direction, that would be appreciated

  Thank you

  Rather than clutter up the code with the event hidden cases (!), controls (!), value properties (!) and variable (!) local (as suggested above but not recommended at all!) In addition, it does not even work correctly!), all you need is a control radiobutton that allows also to "no selection". See attached (LabVIEW 2013). You could also add a third Boolean value for the sine wave and not dismiss "no selection" to make the code even more if auto-documentent.

  I made the transparent container radiobutton to match your existing style.

  

• How can I get update AF light to appear in the eyepiece, when I press the shutter release to halfway?

  The development AF indicator appears when I press the command AF-ON button on the back of my 70 EOS D camera, but not when I press the shutter button to halfway.  How to do the update lignt on the eyepiece turn on when I press the shutter button to half way down?

  You must go to the menu AF & re assign AF for the shutter button. It can be set to one or the other. (back button)

• Look for the timestamp when the file is moved

  I want to find when my file is moved from one folder to another folder with in the same drive. Suppose I have a text file and I just cut this file to a folder and paste to another folder, but in the same drive then I see that none of the date changes i.e. Date_created, date_de_modification, Date_Accessed. Could any body tell me how can I identify when the file is moved from one place to the other place.

  Can anyone help please as it is necessary in an emergency.

  Thanks in advance!

  I suggest you do this:

  1. Change the first two lines of the script more far down to suit your needs.
  2. Save the script as Filemonitor.vbs in an appropriate place.
  3. Invoke the script from a command prompt. He will continue to run in the background until you press Ctrl + C.
  4. Add a file in the target folder. Within 10 seconds, you should see the output in the log file.
  5. Add the name of the script to your startup or logon script so that it runs automatically.

  sTargetFolder = "D:\Test."
  sLogfile = "D:\Log.txt".

  Set OFSO = CreateObject ("Scripting.Filesystemobject")
  «sFldr = "" "" & Replace (sTargetFolder, "-","-") & "»
  Set oWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
  Set cMonitoredEvents = oWMIService.ExecNotificationQuery _
  ("SELECT * FROM __InstanceCreationEvent WITHIN 10 WHERE" _)
  & "Targetinstance ISA"CIM_DirectoryContainsFile"and"_ ".
  (& ' TargetInstance.GroupComponent ='Win32_Directory.Name = "& sFldr &" ' ")
  Do
  Set oLatestEvent = cMonitoredEvents.NextEvent
  Set oLog = oFSO.OpenTextFile (sLogfile, 8, True)
  oLog.WriteLine Date() & "" & time & "" & Replace (oLatestEvent.TargetInstance.PartComponent, "-","-" "")
  oLog.Close
  Loop

• How can I change level games from beginner to intermediate Internet games - sting? Game keeps returning to the beginner when I press on enter.

  No matter how many times, I'm trying to upgrade the level of play that soon I push enter again game, it comes down to benner

  The solution was to choose the play button just after connecting with a new game and choose change level.  The message is that microsoft will look for a set of intermediate level available the next time that you click the game Spades to play.  / i do not know if he did the very next time, but it certainly made the second time.  Beginner level will not change on the initial graphics, but when I choose intermediate, I can see correct statistics for intermediate level AND although the level remains at the beginner when I go to play another game, the level I play is intermediate.

• Why is there the lag when you press the SPACEBAR for playback in edit mode?

  When I press the SPACEBAR to start playback of a file in edit mode, a second of 2-3 delay before playback starts ago, this makes editing very difficult competently. does anyone know of any settings that may resolve this problem or may have another reason for why this might be happening?

  It may happen if the sampling frequency of your hearing file does not match that of your audio interface as hearing should make a conversion of the prior sampling rate it loads the audio buffer.

• Can't see the animation of the symbol when it is placed on the timeline? Flash Pro CS6

  In Flash Profesional cs6 - I created a symbol (a MovieClip) with simple animation. It just grows. When I test the symbol I see that it works. But when I go to the timeline, put the symbol on frame one - add enough frames to account for the animation of the symbol - I can't see the animation happens. Can someone help me understand what I'm ins step sing? Thank you very much!

  BTW: If it's useful info: I am currently taking a simple picture of burst / star growing up – and you want to use 10 or so instances of that symbol to create fireworks in the sky.

  BTW 2: I don't see Flash Pro CC in the 'Community' dropdown - where should I post this?

  MovieClips defined in the timeline panel do not play when you scrub the timeline. You will need to use Test movie... to see the animation of the movieClip.

• Different looks of the bookmarks when you merge documents with Acrobat Pro DC

  Hey guys

  When you merge several PDF Acrobat DC creates bookmarks for each original file but the bookmarks different as standard bookmarks, you can create by clicking on 'Add bookmark' in the navigation bar.

  When you add other documents that already merged, the look of the modification of bookmars for the newly merged to the standard pdf looks like.

  As shown in the picture below, the first 4 documents have been merged in a single step with the merge tool and one more has been added with the "Page management" tool

  .

  Can someone explain the difference between the two types of bookmarks and how to homogenise them?

  Thanks for your help!

  Robin

  Not that I know of.

  Friday, October 23, 2015 21:03, robink27733514, [email protected]>