looking for a little help with 'ownership' of a virtual machine

Similar Questions

• Need help with copy/move a virtual machine to Mac Pro for MacBook Pro

  Hello

  I have Fusion 7.1.1 installed on my Mac Pro (lap) and my MacBook Pro (laptop). I am copying my virtual Windows machine 8.1 of the tower to the laptop. I copied the. vmwarevm file from the tower to the laptop. When I try to import the virtual machine in Fusion on the laptop it is grayed out. I don't know why 'find Virtual Machines' does not work either.

  
  

  Thanks for any help,

  
  

  Steve

  Have you tried "Open and run" in the file menu of Fusion with the 8.1 Win as target VM?

  Note that if it works, ask if it has been copied or moved. If you Copied, renewal may be necessary because the MAC address has been changed.

• Need help with these questions of virtual machine?

  HI GUYS I NEED SOME HELP WITH THIS MATCH THE FOLLOWING

  EVERYTHING IS POSSIBLE! POST RESPONSES FROM RITE?

  Thank you

  

  Answers are

  A

  D

  B

  F

  Post edited by: Vikas

• IP number looking for PSI - need help with a sql solution better and faster

  Hello

  I have a table (one) with more 1 000 000 IP addresses and numbers (the digital equivalent of the IP address)

  I have a second table (b) which contains a mapping between the ranges of the ISP and IP. The table looks like this and more contains 150 000 entries:

  BEGIN_IP_RANGE END_IP_RANGE ISP_NAME

  --------------------------   ----------------------   --------------

  600000000 700000000 ISP_X

  800000000 900000000 ISP_Y

  I'm creating a third table (c) which connects (a) IP numbers to identify the ISP from (B). The query looks like this:

  CREATE TABLE c

  AS

  Select a.IP_ADDRESS

  b.ISP_NAME

  IP_NUMBERS a, ISP_LOOKUP b lkp

  where a.IP_NUMBER between b.BEGIN_IP_RANGE and b.END_IP_RANGE

  ;

  There is no key join between the 2 tables and so I use TO search for the access provider. The performace of it's terrible and table (c) takes several hours to create.

  Does anyone have any thoughts/ideas/suggestions on how this research can be achieved by using a solution better and faster?

  Thank you very much

  Shah

  The performace of it's terrible and table (c) takes several hours to create.

  Hours what do you say?

  See if the following can help.

  Cardinalities are similar to yours. The ETG takes 7sec. :

  SQL> create table ip_numbers (ip_address, ip_number) as
    2  select cast(to_char(level,'fm099G999G999G999', 'nls_numeric_characters=,.') as varchar2(15))
    3       , level
    4  from dual
    5  connect by level <= 1000000 ;
  
  Table created.
  
  SQL> select * from ip_numbers where rownum <= 10;
  
  IP_ADDRESS       IP_NUMBER
  --------------- ----------
  000.000.000.001          1
  000.000.000.002          2
  000.000.000.003          3
  000.000.000.004          4
  000.000.000.005          5
  000.000.000.006          6
  000.000.000.007          7
  000.000.000.008          8
  000.000.000.009          9
  000.000.000.010         10
  
  10 rows selected.
  
  SQL>
  SQL> create table isp_lookup (begin_ip_range, end_ip_range, isp_name) as
    2  select 1 + (level-1)*5
    3       , level*5
    4       , cast('ISP_'||to_char(level,'fm099999') as varchar2(10))
    5  from dual
    6  connect by level <= 200000 ;
  
  Table created.
  
  SQL> select * from isp_lookup where rownum <= 10;
  
  BEGIN_IP_RANGE END_IP_RANGE ISP_NAME
  -------------- ------------ ----------
               1            5 ISP_000001
               6           10 ISP_000002
              11           15 ISP_000003
              16           20 ISP_000004
              21           25 ISP_000005
              26           30 ISP_000006
              31           35 ISP_000007
              36           40 ISP_000008
              41           45 ISP_000009
              46           50 ISP_000010
  
  10 rows selected.
  
  SQL> create index ip_address_number_ix on ip_numbers (ip_number);
  
  Index created.
  
  SQL> set timing on
  SQL>
  SQL> create table ip_mappings as
    2  select /*+ use_nl(a b) */
    3         a.ip_address
    4       , b.isp_name
    5  from isp_lookup b
    6       join ip_numbers a on a.ip_number between b.begin_ip_range
    7                                            and b.end_ip_range
    8  ;
  
  Table created.
  
  Elapsed: 00:00:06.94
  SQL> select count(*) from ip_mappings;
  
    COUNT(*)
  ----------
     1000000
  
  Elapsed: 00:00:01.22
  

• looking for a little help

  Hello Board and all members!

  I'm new to the Dell system.  I have a Dell latitude CPI that has windows 2000 sp5 OS.  The question is (and probably responded several times) that I can't play the DVD on the CD.  I installed Real Player v10, producer of energy DVD, Windows media (new version and 6.4) and various others.  Is there something I'm missing?  I want to use this laptop as a portable player when we continue camping as well as other projects I have going.

  Any help will be enough, and thank you for your time and concern.

  
  

• Looking for a little clarity with Photoshop

  I'm new on this forum, but not Adobe products. I've been using Photoshop for over 10 years working on my photos and create logos and designs. On the trial version of the creative cloud for 27 days. Am plans to use the offer of creative photography of cloud for $ 9.99. My question is, it says it includes Photoshop, Lightroom and much more.  This is the full version of Photoshop? In other words, it's not Photoshop Elements, etc.?  Thank you.

  Yes, this is the full version of Photoshop. It also includes the bridge.

• I am looking for camera wizard compatible with toshiba satellite a300

  I am looking for camera wizard compatible with toshiba satellite a300

  This is an English forum. Click on the globe at the bottom of the page and select your language.

• Looking for solution flip 3D with Adobe Muse map

  Hey all,.

  I'm looking for a way to have 2 images to return back to back.

  What I have are two images: the front of a card and a back of a business card

  What I need, is that when you mouse over the image before flips back image

  I tried a flash option that does not work well, especially if I have more than 1 set of images that I want displayed.

  I also tried a jQuery option that has gotten me more closely, but maybe I'm just having problems with my jQuery.

  Here is what I tried

  I took the .css file downloaded who - took the .js file and uploaded - added HTML as an embedded object (under the head of <>< / head > part I put in the < head > section page properties) I made sure all the CBC links indicated in the right places... but still nothing.

  Did anyone had success with the addition of images flip card at all?  And if yes, what do you use?

  Any help would be great.  Thank you

  -Jeff

  Hi Jeff

  You can try using Flip cards in Exchange:

  http://Muse.Adobe.com/exchange-library/flip-cards

  Thank you

  Sanjit

• Looking for VMUG members help create our site VMUG

  All,

  I'm looking for a volunteer to create / maintain the VMUG DFW website. I've already registered and hosted on godaddy. Is there someone would be able to help to build and maintain the site? It is only 5 pages and should not need to be updated often.

  Shoot me an email if you are interested.

  Thank you

  Tony Gradig

  VMUG Leader

  [email protected]

  I am the game and I can add you to my WordPress setup you can remote admin with a variety of tools (even from iPhone or iPad). Calendar of events and other plugins already there from my other sites.

  -

• Looking for examples of customized with folder KD with paged results search

  Hello
  
  I'm looking into writing a portlet that is customized for the search for one or more specified folders of knowledge (Community preferences) directory and display the results, "inline", in a table with pagination. This seems to be a fairly common thing to want to do; and snapshot of search doesn't have the ability to customize the results of how I would like to display.
  
  It would be fantastic if someone has a code that they were willing to share who does that canned; but I'm really looking for a good example to get results of research via the API (.net) and link these results to a grid to display.
  
  Any help is appreciated.
  
  -tomS.

  Hey Tom, shoot me an email and I can send you our code for this canned as well as screenshots and explanations of how it works.
  And Yes, its to .NET and works very well in 6.0 - 6.1mp1, have not yet tested in 6.5.

  [email protected]

• Looking for a helmet system with double docks rechargeable wireless

  I am looking for a very specific product and I was wondering if anyone knows a product that will do the trick.

  I want a system of wireless headphones wireless with a loading for each helmet Bay. Transmitter should accept level line of double RCA Records. I would have preferred a 900 mhz transmitter, but IR is acceptable. The system should come with two headsets, or there should be a system with transmitter/headphones with the possibility to add a loading dock and an additional heaset.

  My old system was a Sony which is at his last breath, and I found a replacement for another manufacturer with two headsets, but it lacks the loading docks - connect the heaset in the transmitter and the two heasets cannot be pursued at the time. In addition, the manufacturer says not charging headphones for more than 24 hours or you may damage the battery.

  Anyone know if Sony or someone else does what I want?

  Hi, Verne.

  Sony factory not wireless headphones double. You can perform a search on the Internet, check for any third party double helmet.

  If my post answered your question, please mark it as an "accepted Solution".

• a little help with a modification form?

  Hi all:

  So, I tried to fold a rectangle shape with rounded corners with a radius of 30px using the anchor to add and convert tools... just don't have a lot of luck to al and so I'm looking for some advice.

  Here's what I'm trying to accomplish

  

  Seems no matter how I go about it I am not close #2 so for those who master powerful Pen... I ask for pointers, you may have to offer

  Thank you!!

  The easy way would be to use Edit > transform path > Warp > Arc

• I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

  My site appears much too big in firefox. And I want all browsers to view my site properly.
  I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

  You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

  Possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

• With the help of modern.ie of Virtual Machines to test the App

  I'm developing a freeware desktop application and test on older versions of Windows. Terms of the license modern.ie declare the following

  1. You can use the software for testing only. You can use the software for commercial purposes. You can use the software in an operational environment.

  Although the site is intended for testing of web sites on Internet Explorer, allows to test the desktop apps as well? The app does not interact with IE in some way, if that makes a difference.

  Well, I am not a lawyer, but looks like you can use it for any test you want.  You could do this with your own virtual machine running an evaluation version of Windows also.  All these expire so you can't use them constantly, but you can always go back or download a new when it expires.

• What SDK / API is more suitable to interact with a web server virtual machines?

  Hi all!

  I am a beginner with virtualization / VMWare and currently have an ESX Server I can get with vSphere. I am trying to perform a certain task and just noticed the different API and SDK Kits available for users of VMWare but do not know which is best for what I'm trying to do.

  Here's what I want to do: for demoing purposes, I would like to automate the creation and management of virtual machines in such a way so that these tasks are linked to a web application. In other words, I want to run a simple web application (ideally with a PHP backend) which allows visitors to create accounts that correspond to the virtual machines. Connect to one account, I would like to start their corresponding VM and hand them a connection. And when they connect, I would like to disable this VM.

  It seems to me that the vSphere Web Services SDK might be the most appropriate resource to manage that kind of thing. Is this fair?

  And - I know that it is not relevant to virtualization, but bear with me if you know the answer - how do I get Java or c#, the language supported by the SDK, to interact with the backend PHP web app? Or would I be better off just working with .NET so that I can use c# from the beginning, or even with Java in the same way?

  Thank you for any recommendations!

  OK, I was playing with it.  I think the example is a very old constructions of SOAP has changed, or modified nusoap.

  I got it to work, but you have to build your soapval a little differently.  This could become tedious if you keep working with it (you'll have to learn that SOAP built).  You can just use Perl based on your project (I've been messing around with Mason/Perl and the SDK).

  The virtual execution code don't mess with expectation that vim25.  For example, does not have the constructor of soapval type = "ServiceInstance"but he defines simply as xsi:string (which is good IMO).  You will have to develop the construction of soap message, which I think you might find get a bit tedious when you start dealing with complex queries later if you project requires it.  You almost create a wsdl-> wrapper of php class for your objects in SOAP or dig in the soap envelope body.

  In any case, this can help you get started...

  
  
  getError();
          if($err) {
                  echo $err . '
  ';
          }
          $namespace = "urn:vim25";
  
          unset($soapmsg);
          $soapmsg[this] = new soapval('_this', false, 'ServiceInstance', false, false, array("type" => "ServiceInstance") );
  
          print(htmlspecialchars($soapmsg[this]->serialize()) . "
  ");
  
          $result = $myconnection->call("RetrieveServiceContent", $soapmsg, $namespace);
  
          $err = $myconnection->getError();
          if($err) {
                  echo $err . '
  ';
                  print_r($result);
          }
          else {
                  echo "No Error
  ";
                  print_r($result);
                  echo "
  
  ";
          }
  
          unset($soapmsg);
          $soapmsg[this] = new soapval('_this', false, $result[sessionManager], false, false, array("type" => "SessionManager") );
          $soapmsg[userName] = "root";
          $soapmsg[password] = "VMware1";
  
          print(htmlspecialchars($soapmsg[this]->serialize()) . "
  ");
  
          $result = $myconnection->call("Login", $soapmsg, $namespace);
  
          $err = $myconnection->getError();
          if($err) {
                  echo $err . '
  ';
                  print_r($result);
          }
          else {
                  echo "No Error
  ";
                  print_r($result);
          }
  
  ?>
  
  
  

  My outings are not pretty, but you can see his recording with success:

  <_this xsi:type="xsd:string" type="ServiceInstance">ServiceInstance
  No Error
  Array ( [rootFolder] => ha-folder-root [propertyCollector] => ha-property-collector [viewManager] => ViewManager [about] => Array ( [name] => VMware ESX Server [fullName] => VMware ESX Server 3.5.0 build-153875 [vendor] => VMware, Inc. [version] => 3.5.0 [build] => 153875 [localeVersion] => INTL [localeBuild] => 000 [osType] => vmnix-x86 [productLineId] => esx [apiType] => HostAgent [apiVersion] => 2.5u2 ) [setting] => HostAgentSettings [userDirectory] => ha-user-directory [sessionManager] => ha-sessionmgr [authorizationManager] => ha-authmgr [perfManager] => ha-perfmgr [eventManager] => ha-eventmgr [taskManager] => ha-taskmgr [accountManager] => ha-localacctmgr [diagnosticManager] => ha-diagnosticmgr [licenseManager] => ha-license-manager [searchIndex] => ha-searchindex [fileManager] => ha-nfc-file-manager [virtualDiskManager] => ha-vdiskmanager ) 
  
  <_this xsi:type="xsd:string" type="SessionManager">ha-sessionmgr
  No Error
  Array ( [key] => 52494642-84e1-33d1-92f3-95c044257a44 [userName] => root [fullName] => root [loginTime] => 2009-07-14T15:37:21.820431-07:00 [lastActiveTime] => 2009-07-14T15:37:21.820431-07:00 [locale] => en [messageLocale] => en )