Looking for driver PCI device

Hello

My friend's daughter's boyfriend decides to clean up his laptop (with XP) and removed all kinds of things, that it should not have.
I managed to get all the drivers and back stuff and work well except for one annoying thing. Whenever the machine restarts the 'found new Wizard"starts looking for PCI device, but then cannot find the driver. This happens each time twice.

This PCI device with a yellow cross in Device Manager under system devices so it's a bit strange with the XP installation disk, is not that it is. I searched on the net and you have to pay for the driver. But because we don't know what it's for, I've disabled in Device Manager and I check 'do not ask for this new' in the wizard. But the Assistant appears twice on each reboot.

Ideas please!
J

Yeay I think it is solved!. I noticed after installing all the SP3 update the new found material now sought device Modem, not to PCI and more. So I went ahead with it and who seemed to have done. More no errors in Device Manager and no new no found Hardware Wizard when you restart.

Thanks for all the answers because they are really helpful to know

J

Tags: Windows

Similar Questions

  • Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

    New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

    Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

    I get the same error message.

    It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

    I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

    To access the printer on any PC, I just have the icon in my taskbar.

    The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

    I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

    Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

    So, in my case, the messages themselves were the only mistake!

    FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

    I hope this has been helpful!

  • I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

    Hello

    I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

    Any ideas, please?

    Hello

    I did a system image (drive C :) and a rescue of dvd of Windows 7) Cool, it uses a Volume Snapshot.

    Then, I installed the Vista 64 bit drivers successfully.

    The drivers are:
    -ENE PCI Memory Stick Card Reader Controller

    -Card Secure Digital ENE PCI / MMC Card Reader Controller

    -AuthenTec Inc. AES2501A (fingerprint)

    -Trust Webcam 15007

    Unfortunaly, the imprint does not work. I thnik my fingerprint is not compatible with the new Windows Biometric Framework (http://windowsteamblog.com/blogs/windows7/archive/2009/01/08/windows-7-puts-it-s-finger-on-enhanced-biometric-support.aspx)

    Thank you all, bye.

  • Looking for driver CanoScan D646U

    Looking for driver CanoScan D646U

    CanoScan D646U drivers:
    http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_d646u?selectedName=DriversAndSoftware

    Note: they do not have Vista or Windows 7 drivers, the latest drivers Canon has are for XP.

  • Dell Optiplex PC 390: the driver for the PCI device is not installed

    In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.

    When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.

    I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:

    PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00

    PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4

    PCI\VEN_1FD4 & DEV_1999 & CC_070800

    PCI\VEN_1FD4 & DEV_1999 & CC_0708

    I don't know where to take from here. Can anyone help?

    Thank you

    Kathy

    Hi, Kathy:

    Here is the link for the driver you need...

    http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=DMD90&FILEID=2967023673&osCode=W764&ProductCode=OptiPlex-390&LanguageCode=en&CategoryID=cm

    For later use, there is a Support Forum of community Dell for Dell desktop PC.

    http://en.community.Dell.com/support-forums/desktop/

  • Looking for driver for SD-R2102

    Hello! My computer does not recognize that I have a CD/DVD (SD-R2102) and I can't find a driver to download - can someone give me a clue where to look?

    [Edited by: admin 7 May 05 20:49]

    Hello Embera

    It is not easy to give you advice if you don't give any more information on this issue. It will be interesting to know what model of laptop you have. Have you changed the device alone, and why? Is there an error message? Please write a little more about it. It may be useful.

    Anyway as I know it is not necessary to install a device driver. Devices for specific cell phone model is only important.

  • Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

    Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

    Try this one from HP:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

    Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

  • Reinstall Winwows Xp, no driver PCi device

    I have a Compaq Presario SR2013WM and I reinstalled Windows Xp Home Edition and now I have no drivers for one of my PCI devices. Also I can't get on the internet because I'm using a D - Link DWA - 130 Wireless N USB Adapter and my USB port does not recognize my software. I only have the driver for the adapter wireless on a CD, but the computer does not recognize the card. I think my problem with the adapter is because I only have service pack 1 and the requirements for the adapter must have service pack 3 installed. My computer has a processor of AMD Athlon 64 3800 +.

    My devices with no driver are:

    PCI bridge device

    Other PCI bridge device

    PCI Simple Communication controller

    SM Bus controller

    Unknown device

    Video controller (VGA compatible)

    Each device has a yellow question mark next to it in Device Manager and no driver installed.

    My wireless adapter also has a yellow question mark with no driver installed.

    I don't have an ethernet connection, but I don't know if it works, I have always used a Setup wireless on this computer.

    I am posting this from another computer I own.

    Thanks for any help you can offer.

    CherylG

    Thank you for your help and point me in the right direction to start. I found most of my problems were when I reinstalled Windows XP Home Edition that it came with IE6 and some very outdated Windows updates. I didn't have Service Pack 1 installed, I noticed that, after the download of Service Packs 2 and 3 and have Windows Update help me to install the proper drivers that that most of my problems "cured." Whenever I tried to download another program, I get an error of not having programs right prerequesite installed so I can get on my other computer and download some program that I needed on my flash drive and I have several times until I finally got up all drivers and functioning. Then I went to Windows Update and scanned my system, only to discover that there are 162 updates that I lacked, installed all and computer seems to be running fine. Thanks again for all the help.

  • stop looking for other bluetooth devices

    I'm having a lot of problems with my Oticon Bluetooth Streamer and iOS 9.3 x

    The BT connection is down about 60 seconds in a conversation, in other words, the phone connection is still active, but Bluetooth has fallen. When I go back to settings > Bluetooth it shows that it is not connected and I have to type to reconnect. I use this Bluetooth Oticon workflow with my hearing aids and all versions of iOS 4-5 years until this "update" for iOS 9.

    When I go on the Bluetooth setting on the iPhone, I see that he is still looking for other devices and I wonder if there is a way to stop this behavior because it can be interrupted the existing connection from BT. I'm just trying to solve the problems because I am dependent on this device in order to be able to use the phone. I have a profound hearing loss, and it's the only thing that works for me. Oticon is, of course, blame Apple, but who knows and I don't like who is at fault, I just need to fix it.

    Please do not suggest that I get another device or something else that a fix suggested on this specific point. I have an iPhone 6 s passing.

    No, you can not stop from looking for other devices, but this isn't your problem, anyway.

    Try the settings > general > reset > reset network settings and pair them up again. A second possibility is that something could interfere.

  • Satellite M40X driver PCI Device and NetworkController problem.

    Hello..

    I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
    Any suggestion on which driver files may resolve this problem.

    Thanks in advance
    Shine

    Hello

    As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

    Good bye

  • 2000-2d19wm HP: I need drivers for the PCI device and SM Bus controller

    I have a Hp 2000-2d19wm and I have downgraded to win8 to win7. Now I am trying to install the drivers and I can't find it on the HP website. Please help me.

    Hello:

    You need this driver for smbus controller...

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_118001_1

    You need this driver for the PCI Dev:

    Realtek card reader driver

    File name: sp64801.exe

  • Looking for Driver of instruments Boonton 9242

    I'm looking for an instrument driver for a voltmeter of RF Boonton 9242. Any help is appreciated!

    Is this consistent SCPI instrument? If so you don't necessarily need drivers for the exact model.

    SCPI defines interfaces for several types of instruments - including voltmeters.

    Mike...

  • 9850ed upgrade to windows 7, looking for driver coprocessor

    Anyone here who can help me in the right direction.

    Got a yellow questionmark on the coprosessor.

    Looking for a good driver to get rid of this problem.

    Your listing:

    Link to the plug

    Did you install 32-bit or 64-bit Windows 7?

    This driver should work for 32-bit Windows 7:

    nVidia nForce chipset driver for Win7 32 bit

    Post back if you need 64-bit driver or just look for him... nvidia.com 730 chipset nForce

  • Looking for pinout - PCI - CAN 18472E-02 d - SUB 9-pin

    Hello

    I have a 2003 PCI - CAN card that I can't seem to find much information on:

    NOR CAN series 1 card. Connector D - Sub 9 pins - Part Number is: 184726E-02

    Someone at - it a pinout or know if this follows the normal output of 9-pin NI CAN?  Nothing in MAX and nothing Google or OR from what I've been able to find.

    Thank you!

    Hi Waterppk,

    The pinout of the connector 9-pin D - Sub CAN is basically the same for PXI, PCI, PCMCIA, 1/2, series, USB AND interfaces (Center of differences around the use of the PIN 9: "V +").

    You can find the latest version of the manual here: NI-CAN hardware and software manual and specifications

    Chapter 4, "Connectors and cables" describes the pinout in detail (see page 4-2).

    -B2k

  • You can send me a link to a driver for my PCI device. Pavilion g6-1152ex

    PCI\VEN_10EC & DEV_5209 & SUBSYS_1670103C & REV_01

    PCI\VEN_10EC & DEV_5209 & SUBSYS_1670103C

    PCI\VEN_10EC & DEV_5209 & CC_FF0000

    PCI\VEN_10EC & DEV_5209 & CC_FF00

    Hello

    The hardware id is for the Realtek card reader driver on the corresponding link below.

    Realtek card reader driver - Windows 8

    Realtek card reader driver - Windows 7.

    Kind regards

    DP - K

Maybe you are looking for

  • Satellite L40: Need driver WLAN for XP

    I just bought this laptop and I removed Vista and installed Windows XP. Since then, I can't use my wireless LAN. Does anyone know, what wireless LAN chip is on board and where can I find the driver.

  • How can I keep MS Money Bills (function) to add to the budgeted amounts?

    How can I use the function of invoices in MS Money Plus and there not add to the budget categories?  Bills to use work as a reminder of the drafts of the auto, etc., which I add to the registry check manually.  I just noticed that the 2013 budget tha

  • MS Wireless mouse cursor freeze in XP

    I was getting a random freeze cursor 2 or 3 times a week for a month and a reboot might solve the problem. Yesterday, cursor freeze happened and a restart had no effect. I changed the battery, no change. I replaced the mouse and receiver with one ano

  • XP runtime errors in by reinstalling

    I had to reinstall Windows XP and am having problems setting up again. When I try to install microsoft fix Center, he said cannot do, runtime error... When I try to start my Winword.exe or msaccess.exe (2007), he says "operating system is not current

  • HotSpot Mobile blackBerry Smartphones

    I have a BB Bold 9700 and I try to activate the Mobile Hotspot mode.  On the BB site, I realized that in the management of connections, I should get an option to select the Mobile Hotspot.  However, this option is not displayed to the top.  I should