LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

Similar Questions

• receiving error code 39 for dvd, driver will not load.

  replace corrupt cdrom.sys

  small management business of vista 32 bit.  receive error code 39 for dvd.  driver will not load.  I tried to uninstall.  same question on re - start.

  I tried regedit suggestions.  UpperFilter deleted, no lower filter exists.

  In addition to the above on the excellent advice, cdrom.sys is not corrupt.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• CD/DVD drive will not open a picture disc

  My CD/DVD drive will not open a photo record, any ideas?  It used to work and now will not, it is not an old computer

  Hello

  Here's what you can try to solve the problem: http://support.microsoft.com/kb/330135

• CD / dvd drives will not read / write to any disk

  Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!

  Hello

  Its not unusual for the same problem have an impact on both drives, in fact its very common.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my cd/dvd drive will not read or burn.

  When trying to burn a cd it just telling me insert blank disc, but there is already an in

  Hello

  Used speed, the actual brand of discs, burning and if file Live or mastered all come into play.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ==================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Toshiba cd/dvd drive will not read or eject or anything like that!

  Cd/dvd driver for my Toshiba laptop will not work. It lasted about a year, then he became gradually sporadic to read/write or ejection and by last winter, he stopped all together. I've uninstalled and reinstalled the drivers for it, and in Device Manager, it says that the device is functioning normally; every once in a blue moon it will suddenly eject, but then if you put something in nothing happens, even not with the original disks. With the repair utility, it says something like unreadable media, at best. I'm a little confused as to what is happening here, so, what steps should I take to verify if it is indeed the drive disc or something in the software?

  Thanks, Bruce

  Hello

  You may need to check with Toshiba Support, documentation online & drivers and their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive is not burning DVDs

  Help, please!

  I bought a writer of CD/DVD Toshiba SD-R5372 a couple of months. I had it installed by a pc repair shop. When I gathered my computer that they don't give me not all discs pilot etc... for the product. They say now that they do not have the disks.
  My problem is that I recently had to reformat my hard drive due to problems with viruses etc... Although windows argues that it recognizes my DVD burner and it plays DVDs fine, but it will not burn them. They tell me that it could be a driver problem and searched the site of Toshiba, in circles, but can't seem to find the drivers for my product.
  Can someone please help?

  Thank you

  Hello

  As far as I know that it is not necessary to install a driver. The device should be recognized by the operating system. If there is a burning problem, I really put t think that this may be caused by wrong driver.
  I put t know what media you can use with this camera, but please be careful about this. If you want to try to use Nero software of engraving. It is very easy to use and there is also a small tool called Nero info tool. You can use it to pick up all the info on your drive.

  Good bye

• My CD/DVD drive will not appear in the Device Manager, but present in the BIOS.

  DevCon didn't find it. It will not open even if I don't get to Device Manager and check for changes to the system. I deleted the registry entries upper and lower limit. Any other suggestions? For additional emphasis, he does not show even in the Manager of devices so I cannot restore or reinstall the drivers from there. It might also help that I use Vista Home Premium on a Compaq Presario F755us.

  Hello

  (1) does the BIOS see the main hard disk drive or a secondary hard drive?

  (2) remember to make changes to the computer before the show?

  You know may not be not that most systems are set to show only the splash screen. If you go into the BIOS Setup, it should show the disks that have been detected on two primary and secondary IDE channels.

  Note: the basic procedure to change the setting of the disk controller is to restart your computer and enter the system BIOS. The most common method is to press F2 to enter Setup, (another PC may use a different key). On the BIOS screen, find the setting that offers the AHCI, ATA or IDE and RAID. If the parameter is set to AHCI, change the setting to ATA. Restart the PC on the Windows installation disc

  Warning: Incorrect settings in the system BIOS can cause your PC function incorrectly. If you are not familiar with the configuration of the BIOS of the system, you must contact the PC manufacturer for assistance.

  Try the steps in the following article and check if it helps.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  You can also check the following items.

  CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.Microsoft.com/kb/929461

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk: http://support.microsoft.com/kb/952951

• I have a Dell Inspiron 1525. The player/cd-DVD drive will not work. The help section it says it is (code 10). The drivers seem to be installed. Can you help me please? Operating system is Windows Vista Home Premium

  I tried the support centre and followed their advice, but no luck yet.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Optical drive will not burn

  I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.

  My specs:

  Windows 7 64-bit SP1

  H8 HP desktop PC - 1360t

  My optical drive: DH16ACSHR

  My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver

  When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.

  I HAVE ALREADY TRIED:

  Remove/uninstall the driver

  Checking the registry entry for the upper and lower entrances, THERE ARE NONE

  Being run/scannow - Windows comes up saying that it could not find any problems, all right.

  Update driver - he says I have the latest driver

  Roll back the driver - he says that there is no driver installed previously

  I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.

  I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.

  I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.

  Hoping someone has an idea where I can get a newer than 2006 for this device driver.

  Hello

  Hope the following patch helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Good luck.

• Satellite A200-AH5 CD/DVD drive does not burn any CD

  I have a laptop Toshiba Satellite (A200 AH3) under Windows Vista Home Premium.
  For what it's worth, there's a T2085 @ 1.73 GHz processor. It is a 32-bit operating system.
  In the Device Manager when I click on the CD/DVD-Rom drives, I get CD/DVGW TSSTcorp TS-L632D ATA Device.
  By clicking on this that I find that the driver is working correctly and up-to-date. I was not able to burn a CD on this system...

  I have not tried to burn a DVD.
  I ran through all the steps to burn a CD, however, but even if he goes through the process to show the progress that each song to a playlist is burned to disc, when the disc is supposed to be finalized... nothing on the disc when I try to read, and with the exception of iTunes or another program open when I place the CD in the drive to be played absolutely nothing happens.
  I tried to burn music on a CD on the desktop of my sister, and it burned fine.

  Then... It is not a problem with the discs.
  When I took the disc to my sister had burned and placed in the disk drive on my laptop, it displays the tracks that had been burned and he played the music very well. This really threw me a loop for.
  The laptop is only a year old and I can not burn anything.

  Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I don't know if he's going to burn a DVD, but I ruined 2 boxes of CD - R discs already. After disk supposedly burned music... even if no music has been burned... the disc is ruined and must be discarded.

  I'm not terribly knowledgeable about aspects of warming of the computers, so I hope you can tell me in general terminology if you answer to my problem. I really hope someone out there can advise me as to what is happening or what I should do to fix the problem.

  Thanks for any help in advance!

  Thank you.

  Gord
  Canada

  Hello

  In your case, I recommend trying the different CD s from different manufacturers.
  You should know that not all CD or DVD would be fully compatible with your internal CD/DVD drive.
  In many cases no compatible CD or DVD would lead to exactly the same problems that you described in your post so trying different media!

  In addition, I recommend checking the Toshiba driver for a CD/DVD drive update page s firmware.
  As I m not wrong not the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for a new firmware. Maybe a new firmware is available

  Last but not least, you can switch to other burning software I m using Nero I think it s the best applications for such purposes

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• HP Pavilion p7-1234: functional CD/DVD drive will not boot Clonezilla disk recognize

  Have three HP p7 in small desktop running Win 7 64 bit. (Avast free version)

  None of them will recognize a bootable Clonezilla ISO or Zip, whether on CD/DVD or USB.

  Measures already taken:

  BIOS set to boot from CD/DVD

  In turn the BIOS configured to boot from USB

  Have used any compatible version of Clonezilla downloads based on my operating system and the processor, including the generic i686 ISO and Zip. (and makes bootable USB drive)

  CD/DVD and USB function perfectly well otherwise. Able to access the other disks and USB media with no problems.

  Also able to see the Clonezilla ISO when I look at the CD/DVD drive.

  It starts simply what whether Clonezilla.

  If someone has encountered this, I would like to share your experience.

  Thanks for your time.

  One rookie mistake.

  Problem:

  Bad, I carved the Clonezilla ISO to CD/DVD disc.

  Solution:

  1. download the ISO Clonezilla appropriate for your computer, on your desktop.
  2. place the disc in the CD/DVD drive
  3. "right click" on the Clonezilla ISO on your desktop.
  4 Select "Burn Image" and follow the default values.

  Now you have a proper boot Clonezilla disk.

  Next:

  1. make sure the BIOS is set to CD/DVD is bootable.
  2. place Clonezilla disc in open the tray of the CD/DVD drive.
  3. restart the computer and close the CD/DVD tray
  4 put your finger on "F9" key and now wherever the blue HP screen appears, press "F9".
  5. boot Menu loads.
  6. move arrows down to the first line indented under "ATAPI CD/DVD DRIVE...
  SATA2 or SATA3 will be according to your system.
  7 hit ENTER.

  Clonezilla immediately, boots and loads.

  I hope it works for you.

• Qosmio G20 - CD/DVD drive does not burn

  Please can someone help?
  I rebuilt my qosmio g20 and the thing what it is great except my cd dvd player that plays audio and video but simply will not register.

  When the folder now, he says no. RECORDER and when I click on check for other readers of anything.
  Select record is selected. Before the reconstruction, it all worked but did not.

  I have nero has always worked well even with the sound stuff installed. So I reinstalled nero and nothing.
  I tried to delete the upper and lower entrances in regedit, which is a common difficulty that offered among various forums but nothing again.

  Sick as a parrot, so glad of any help here... Thank you

  Hello

  It's very strange
  Have you tried to reinstall the OS again?
  Try this.

  I recommend also to remove the CD/DVD drive Device Manager, then restart the laptop.
  Usually the operating system should recognize the drive of the CD/DVD device correctly and must reload the driver again.

  I see you are using Nero burning ROM. I know sometimes the BONE can be confusing upward if several burning applications are installed.
  So remove the sonic software and use only one. Nero.

  Best regards