Looking for help developing code labview [Urgent]

Similar Questions

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? T

  I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? Thank you!

  ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv

  You will need Acrobat to convert files > 100 MB.

  [subject moved to cloud Document PDF Services forum]

• Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Can I migrate and then upgrade?

  Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?

  You don't want to think in terms of migration when it comes to Adobe software.  You must install using installation files.  There is no need to have installed CS5 unless you plan to use it.  There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted.  You get the first annual subscription for almost half of the normal price.

  Creative cloud plans

  https://creative.Adobe.com/plans

  Director of the installation:

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Looking for a developer

  I'm looking for an experienced project developer.  Contact me to discuss.

  -Perry

  I would say that this be posted in the Java developer section, more frequented by developers.

  Please do not republish, a moderator will move to it.

• I'm looking for the Pin Code of the card UMTS Vodafone

  Hello

  I bought Lenovo T400s and was surprised to find a Vodafone SIM inside!

  Now I want to use a seaching for the PIN Code, dose sombody knows where I can find?

  I only find a card with a no. P. and an ICCID Code, it not there no manual or any other information.

  Thanks for the help!

  larsspo, welcome to the forum,

  the PIN code for the previously inserted in Germany SIM cards is 0000.

  Hope this helps

• Looking for help of Flex

  I'm looking for someone to work with me for a flex project. I'm well-studied in Flex (all the books and familiarize Lynda.com tutorials and Flex in a week several times tutorials), but can't put the pieces together to finish my project. I've posted questions on this forum and people have been incredibly helpful and responsive. The problem is that whenever I have a question, I have to review the entire project to get to the point where I have a question, so I'm looking for someone to become familiar with the project to help me over the hurdles. I looked at individual support options in the Adobe support section but I can't to go round trying to make that support work for using the option. If anyone is interested (I expect to pay for this support) please contact me at [email protected].

  I have provided this type of basic support to others at $50 / hour. I charge sliced 15 minutes, so for quick questions you would pay in general
  $12.50 per issue, $50 / hour for more involved questions.

  One thing, I'm more a front-end guy, so that I can help with HTTPService connection to PHP scripts, I'm not aware about ColdFusion,.
  Java, etc.

  I have a day job, so I have to answer outside the hours of 9-5 hour standard Pacific.

  I have you emailed about this, please respond to this email about this.

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• Looking for examples of Code clone the virtual machine

  Are there any sample code for cloning a virtual machine using the VISDK webservices? I have programming in C++ but a Java / c# application will also help.

  Thank you

  Jan

  It can include both existing and newly added and other disks components.

  It is correct, you must make sure that the unitNumber is unique, I think that if you pass "-1" it will automatically increment the counters for you

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Looking for programmable hardware with labview

  We are fairly new to labview.  We intend to move to labview for many of our control systems, we develop and use the PC Panel. We still have many applications that we use a traditional controller, and these do not require a graphical interface of any kind.  We still want to find a solution to switch completely to labview but I'm having a hard time finding a solution of low cost hardware to run a labview program.  Someone at - it good ideas?  Thanks in advance

  
  

• While blue screens as windows starts and looking for help!

  Hello world

  I'm a big computer noob and I don't know much about it that's why I will ask my questions here, to get help from people who do not know how to solve this problem. So please try to explain it very easily so I can understand you.

  Let's head on the problem; Sometimes my computer completely random stops and restarts immediately after that it stops. It is not a normal shutdown, but it's as if I pressed the button stop or restart button, it stops immediately. To this problem in the past, but well, months when I started my PC upward once again, everything was going well, then I thought it was OK to use my PC with that bit of inconvenience. But yesterday my PC did the same thing but when I clicked on "Start windows normally" it appeared a blue screen which lasts only 0.5 seconds and disappears after it restarts my computer again. Then when I tried to start windows with recoveryoptions it gives me, after windows files have been loaded, another blue screen that doesn't go away until I have shut myself. I tried to boot my PC with a windows CD, but when I did it wat windows departure after loading files and then showed a blue screen.

  Information:

  -Windows 7

  -Asrock H61M-GS is the first thing with a menu of options when I start my PC.

  ------------------------------------------------------------------------------------------------

  A picture is to make it more clear

   <-- first="" i="" see="" when="" starting="">

  

  It is one of the blue screens, I was yesterday. But he continues to change when I do something different. Thus, the blue screens are not the same and error codes keep starting with 0x000000 but the last 2 digits change sometimes.

  I really hope that someone can help me... And if you're Dutch like me you can answer in Dutch... Would be easier for me to understand :D

  Sincerely,

  Etienne KT

  Problem solved. Taken from the video card of the computer and back in and it worked.

• Error - looking for help to recover or restore my data reading disk Windows 7

  My Windows 7 Pro machine restarts automatically while I had an open browser window (I didn't actually see it happen) but now I just see a message that says "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» By pressing this key sequence does nothing. Just see a black screen with this message.

  I have booted from the CD of Installation Win 7 then went to repair. I tried to do a system restore, but no restore points could be found, so I chose the first option. No bones were listed in the list. A few diagnostic tests was performed and I looked at the details. The series of tests except the last System Volume has been altered. It says to reboot to see if that could fix the problem. Unfortunately, it does not and I still see the same black screen with the error message. BTW, as you know, I can't start in safe mode. Also restart on a Win 7 CD now is no longer gives me an option of just complete repair install. I tried to use this boot drive as one secondary drive on another machine to Win 7, but the OS tells me I need to format the disk before it can be used.

  I'm willing to put in the time to try to get the data restored on this boot drive, but don't know what I should try next. Reload the operating system completely wipe the file allocation table and make the data unrecoverable? Please notify.

  -darksquare

  Thanks for the help everyone. I was able to restore all my files to the best of my knowledge. Just a quick overview in case others are experiencing a similar problem:

  1 SSD with Win 7 wouldn't start. Message displayed "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» I restarted the machine and went into the BIOS to check that the drive was detected, which it was.

  2. started to Win 7 install DVD and select the repair option. Ran chkdsk on the drive affected with FixMbr and FixBoot, BootRec. I tried to restart after each of these executables, but he led the original disc reads the message. Along the way, the error messages I received were that the System Volume was damaged and Windows cannot recover master file table.

  3 reinstalled Win 7 on a separate startup disk (HDD) and mounted the SSD corrupted as a slave drive. Win 7 brought a dialog box to reformat the SSD drive as the data seem to be unreadable. Has rejected the format option. At this point, I am unable to browse the files on the SSD via Explorer.

  4 pitted some tools part 3 the SSD which indicated that the partition table on the disk doesn't have the hexadecimal value of appropriate endpoint.

  5 Ran chkdsk /r. Finally, some luck. This process lasted several hours and repair the files of nearly 1 million. The reader become navigable via Explorer. The directory on the disk structure has been restored and files (so far I have not found the missing files).

  -darksquare

• looking for a replacement code instead stage.invalidate

  Hello. I have a project

  I have an image that hold a flvplayback

  also I need an mp3 player, so I want to when I get the flv frame break and after the audio synopsis image output mp3 sound, the video also stop (cause otherwise the sound of the flv has played in another frameworks)

  I use this script:

  stage.invalidate();
  
  mene.addEventListener(Event.RENDER,exitingF);
  mene.addEventListener(Event.REMOVED_FROM_STAGE, removedF);
  
  function exitingF(e:Event):void{
  
              controller.gotoAndStop(2);
              pausePosition = sndChannel.position; 
              sndChannel.stop();
              isPlaying = false;
  }
  
  
  function removedF(e:Event):void{
              mene.stop();
              controller.gotoAndStop(1);
              sndChannel = soundClip.play(pausePosition);
              isPlaying = true;
  }
  

  Shiner is the name of the instance of FLvplayback, all function work very well

  the problem comes when I want to convert and create exe Flash projector with other third-party tools like ZInc, Swfkit

  After I compile my swf to exe and running prjector, when I click on the menu that load frame contain flvplayback, watch the video, the healthy break and everything is ok

  but when I want to go to another frame, and then click the other menus, my projector having replied to the questionnaire and no closed shot!

  
  I check, step by step and remove this framework code to find what cause this code and I found, its: stage.invalidate ();

  I don't know why but it seems its none compatible or confilict with these thirdparty app

  can someone help me find a replacement for stage.invalidate (); and help me run my projector?

  Thank you

  I've been wrong onstage.invalidate();

  I have thoghth it used for removedF function, but it seems he used to Event.RENDER

  so I just remove all script associated with exitingF and add:

              controller.gotoAndStop(2);
            pausePosition = sndChannel.position;
            sndChannel.stop();
            isPlaying = false;

  for the goto frame playback flv button.

  solved my problem and I think I don't need to use Stage.invalidate (); Event.Render or more

  lucky, Dear Kglad give me a real simple way to run the script on a specific image here: http://forums.adobe.com/message/5148931#5148931 , so I need never really stage.invalidate.

  Thank you sinious for advise and answer too