Looking for help of Flex

Similar Questions

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? T

  I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? Thank you!

  ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv

  You will need Acrobat to convert files > 100 MB.

  [subject moved to cloud Document PDF Services forum]

• Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Can I migrate and then upgrade?

  Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?

  You don't want to think in terms of migration when it comes to Adobe software.  You must install using installation files.  There is no need to have installed CS5 unless you plan to use it.  There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted.  You get the first annual subscription for almost half of the normal price.

  Creative cloud plans

  https://creative.Adobe.com/plans

  Director of the installation:

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Looking for a module Flex do Login, registration and license management

  I'm looking for an Adobe Flex module open source or commercial for connection management, registration and user license. The back-end can be either on my site (PHP and MySQL) or secure 3' rd party.

  User interface would be the following:

  • Register (new user)
  • Log in (registered user)
  • Purchase of a new (user) license
  • Apply the license to enable the features of Flex app (user)

  Any suggestions are appreciated,

  OutputLogic

  I saw someone mention this yet, so check the NitroLM

  http://www.Nitro-LM.com/

  On paper, it looks like that's exactly what you're looking for.

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• Error - looking for help to recover or restore my data reading disk Windows 7

  My Windows 7 Pro machine restarts automatically while I had an open browser window (I didn't actually see it happen) but now I just see a message that says "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» By pressing this key sequence does nothing. Just see a black screen with this message.

  I have booted from the CD of Installation Win 7 then went to repair. I tried to do a system restore, but no restore points could be found, so I chose the first option. No bones were listed in the list. A few diagnostic tests was performed and I looked at the details. The series of tests except the last System Volume has been altered. It says to reboot to see if that could fix the problem. Unfortunately, it does not and I still see the same black screen with the error message. BTW, as you know, I can't start in safe mode. Also restart on a Win 7 CD now is no longer gives me an option of just complete repair install. I tried to use this boot drive as one secondary drive on another machine to Win 7, but the OS tells me I need to format the disk before it can be used.

  I'm willing to put in the time to try to get the data restored on this boot drive, but don't know what I should try next. Reload the operating system completely wipe the file allocation table and make the data unrecoverable? Please notify.

  -darksquare

  Thanks for the help everyone. I was able to restore all my files to the best of my knowledge. Just a quick overview in case others are experiencing a similar problem:

  1 SSD with Win 7 wouldn't start. Message displayed "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» I restarted the machine and went into the BIOS to check that the drive was detected, which it was.

  2. started to Win 7 install DVD and select the repair option. Ran chkdsk on the drive affected with FixMbr and FixBoot, BootRec. I tried to restart after each of these executables, but he led the original disc reads the message. Along the way, the error messages I received were that the System Volume was damaged and Windows cannot recover master file table.

  3 reinstalled Win 7 on a separate startup disk (HDD) and mounted the SSD corrupted as a slave drive. Win 7 brought a dialog box to reformat the SSD drive as the data seem to be unreadable. Has rejected the format option. At this point, I am unable to browse the files on the SSD via Explorer.

  4 pitted some tools part 3 the SSD which indicated that the partition table on the disk doesn't have the hexadecimal value of appropriate endpoint.

  5 Ran chkdsk /r. Finally, some luck. This process lasted several hours and repair the files of nearly 1 million. The reader become navigable via Explorer. The directory on the disk structure has been restored and files (so far I have not found the missing files).

  -darksquare

• Looking for HELP online, HTML is broken

  Just noticed that the search for online help for the form is broken. Instead of keys/form fields, it displays an error message.

  Yes, just looked at him and his is fixed now!

• Looking for help on the restructuring after several virus attacks

  Hi all!

  I want to reformat my laptop (Compaq Persario CQ61).

  I caught a backdoor, Trojan a few months back and I can't keep my computer virus. It takes all the Anti Virus software that I install. I ordered and received Windows 7 operating and the CD of drivers a few days ago. But I'm not too computer savvy when it comes to something like this and everything I read about reformatting is scare the heck out of me--looks like a lot of problems trying to do this?

  Can someone give me an overview more and help me?

  Thank you

  Tammy

  Hi Tammy,

  I'm sure it will be fine, but you can always post if you meet problems.

  Kind regards

  DP - K

• Looking for help developing code labview [Urgent]

  Hello
  I need assistance in the development of labview code. I'm new to labview and will appreciate if someone can help me in this matter. I need to control the intensity of charge of ca (halogen with 2kW, 230V, 50 Hz) using Labview and Arduino. But my project with interruption in the Arduino, so it is not possible to use the Labview Interface for Arduino (LIFA).  I searched and it might be possible to use VISA series in this case. The circuit and the Arduino code is attached. Someone who is a subject matter expert can help me?

  The concept of my project is almost the same with https://www.youtube.com/watch?v=oeVJ5bs6E8M&feature=youtu.be

  Hello

  You will find all the information you need and examples of LabVIEW VI from LabVIEW Interface for Arduino

  Interface LabVIEW for Arduino

  Kind regards

• Computer laptop HP DV6 freezes when on the power of the battery, for the most part using Firefox. Looking for help in debugging

  Is there anywhere I can look to see what is running or happening when my PC crashes?

  BACKGROUND:

  My PC has been freezing more frequently lately.

  It seems to happen more often when I am on battery, usually when I am online using Firefox my default browser.

  I tried checking the event viewer, but did not find much, and do not know, I am interested in the right part.

  I can say without a doubt it happens when it is on battery power, almost never when it is plugged.

  In addition, it seems to happen more frequently when I use Firefox, but then I'm usually just surf when I'm on battery.  When I don't really work, I tend to sit at a desk and connect.

  Here are my specs:

  HP Pavilion dv6-3120us laptop

  Product number: XG871UA

  OS: Windows Home Premium Service Pack 1

  Browser: Firefox Chrome for the most part, other times

  I'm starting to capture when / where it happens the more frequntly in a strive to locate the problem.

  I'll try to turn off Firefox addins / extensions as a first step, but would like any other tips.

  Thank you!
  Ian

  I did a quick check this week, surfing on the battery while using Firefox, I fell two times.  Once run it normally, first with all add-ons disabled.

  When I switched to Chrome I had any problems.

  I'll close this and call it a problem of Firefox, I'll open a new ticket if it appears elsewhere.

  But I'll check the both battery test.

  Thank you!
  Ian

• While blue screens as windows starts and looking for help!

  Hello world

  I'm a big computer noob and I don't know much about it that's why I will ask my questions here, to get help from people who do not know how to solve this problem. So please try to explain it very easily so I can understand you.

  Let's head on the problem; Sometimes my computer completely random stops and restarts immediately after that it stops. It is not a normal shutdown, but it's as if I pressed the button stop or restart button, it stops immediately. To this problem in the past, but well, months when I started my PC upward once again, everything was going well, then I thought it was OK to use my PC with that bit of inconvenience. But yesterday my PC did the same thing but when I clicked on "Start windows normally" it appeared a blue screen which lasts only 0.5 seconds and disappears after it restarts my computer again. Then when I tried to start windows with recoveryoptions it gives me, after windows files have been loaded, another blue screen that doesn't go away until I have shut myself. I tried to boot my PC with a windows CD, but when I did it wat windows departure after loading files and then showed a blue screen.

  Information:

  -Windows 7

  -Asrock H61M-GS is the first thing with a menu of options when I start my PC.

  ------------------------------------------------------------------------------------------------

  A picture is to make it more clear

   <-- first="" i="" see="" when="" starting="">

  

  It is one of the blue screens, I was yesterday. But he continues to change when I do something different. Thus, the blue screens are not the same and error codes keep starting with 0x000000 but the last 2 digits change sometimes.

  I really hope that someone can help me... And if you're Dutch like me you can answer in Dutch... Would be easier for me to understand :D

  Sincerely,

  Etienne KT

  Problem solved. Taken from the video card of the computer and back in and it worked.

• BlackBerry Smartphones looking for help, please: my "Downloads" (Torch 9810) whole deleted Panel

  I was trying to move an icon on my control panel downloads for my media folder, and I pointed out and pressed the menu button, when all of the panel suddenly erased. I don't know what I did, nor what I can or should do about it. Any help would be appreciated.

  Thank you, Xan, but the problem has been resolved - the hard way. You can see on my other thread of crisis, I have linked to the BB desktop software and I saw an update available for my OS, I clicked on apply and as this was happening, my connection failed. I kept getting the message that it wouldn't reconnect (aaaaaaarrrggghh!), and my camera ended with the message "error 561, reload software.» I posted a notice 'aid' here, but then the clouds parted and a miracle happened. I tried to reconnect, and the software reloaded. Hallelujah! I restored the backup I ran on the desktop software 3 days earlier, so I reinstalled my applications to my world and my Iconify links. so my download Panel is filled again. I would like, there was an easier way to solve this, but, oh, who cares? I got my BB!