Looking for input on the replacement of certificates self-signed

Similar Questions

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  Please see this link

  Non profits

  If your institution not-for-profit or charity meets the conditions above, you can browse the education of Adobe software versions. Once you are ready to buy, you will be asked to present evidence or your qualification status when ordering.

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• Use the certificate self-signed on TS 2008R2

  Hello reader,.

  We use Firefox on a Terminal server with about 20 servers server farm environment.
  We use a lot of intranet sites for which we have the certificate self-signed by our domain controller.

  In Firefox users get prompt security sec_error_unknown_issuer. As much as I red that Firefox does not check for local free self-signed certificates.
  Is there a way we could set up for all users, they do not see the above error-> specific <-websites (intranet)?

  We do not want the users to add the Security (certificate) as exception 20 times for EACH intranet website on 20 servers dispute.
  It is something that I can edit in mozilla.cfg on each server or is there another solution?

  Thanks in advance,
  Kind regards
  Martijn

  I solved the problem with manual below:

  http://community.Spiceworks.com/how_to/15158-Firefox-trust-a-local-certificate-authority-for-all-users-and-computers

• See imprint SHA of the certificate self-signed client webvpn ASA?

  When connecting to an ASA with certificate self-signed, using Cisco AnyConnect Secure Mobility Client 3.1 (10010), the AnyConnect client presents the big red warning box, which is good.  The user must turn off "Block for unknown servers connections" in the preferences in order to complete the connection.

  Is it possible for the user to view the fingerprint SHA1/SHA3 cert self-signed, before disabling the safety block?  I could have sworn that older versions of the AnyConnect client allow the user view the certificate details and fingerprints before choosing to accept and connect.

  You can't make AnyConnect 3.x or 4.x as far as I know. Even a set of Diagnostics and Reporting Tool (DART) does not include this information.

  It is quite easy to inspect although if you simply browse to the ASA to almost any browser interface. From there, you can review the site certificate (ASA), including the footprint of the RSA public key.

• Looking for hope in the restoration of my iMac

  My iMac HD has failed, and I took it to Apple to get it replaced. I had a Time Machine backup on an external hard drive Seagate. But my iMac just not see the backup drive Seagate. I don't know if there is a trick to getting the Seagate HD displays. It does not show in Finder or in disk utility. But when the iMac HD was not, and I looked for ways to restore, I saw a Time Machine backup date. Now, I can not see the drive. Even though I have the music and pictures stored in iCloud, all my apps are now gone. I don't know where to start. I was a fool to trust Time Machine? This is literally disastrous for me, and I don't know where to start. What I need, is to see this backup disk somewhere BTW, I plugged on another iMac and he did not see it either. Is there some magic for Seagate HD?

  Some things you can try:

  * Open the Finder preferences (under the Finder menu, top left of your screen). Make sure that on the general tab, the boxes are ticked for hard disks and drives, to show them on your desktop. Otherwise, they won't be visible.

  * Try a new cable. The cable went wrong.

  * Open disk utility when the drive is connected. You can see on the left hand side of the disk utility? If you see an external drive, try to mount in disk utility. If you can ride, the files are available? If this isn't the case, you can run disk utility to try to fix it.

  * Seagate's data recovery services.  http://www.Seagate.com/services-software/recover/ first of all, you can download their software and try it for free. If it can find files on the disk, you can then purchase the license of their recovery software to use to recover your files from the Seagate drive. Alternatively, he can perform the data recovery for you (with supplement). The details are at this link.

  I'm sorry it happened, I wish you good luck.  It seems that your problem could not Time Machine, which is actually a very good backup program; but rather, your external drive seems to have a problem. This happens to all readers subsequently, no last forever and that's why I try to keep at least two backups, each with a different method. For example, one with Time Machine, the other using software such as "clone" (such as SuperDuper, CCC etc.). It is good that you use the cloud at least. I hope that you can recover your files.

• You are looking for 8600 OfficeJet pro replacement paper trays

  Where can I buy replacement bins to printer OfficeJet 8600 Pro Plus paper?

  I'm looking NOT for the paper to Add on tray, but a replacement for the main tray. Mix us different types of paper and envelopes in and out of the state bar throughout the day, and instead, we would like to keep several loaded additional bins of specialized paper to reduce the wear on the main plate.

  Suggestiosn?

  Thank you!

  I searched in the online stores available through HP and was unable to find this part.  However, I could see the part is available through the HP Technical Support by calling in.

  Click here to access the complete list of HP Technical Support phone numbers.

  The reference is more CM749-60036 for Assembly of the main tray for the Officejet Pro 8600.  This part is currently around $25 usd, but the prices are subject to change.

  I hope this helps.

• Looking for set up the NI 9233 module, well through which bus?

  I'm a bit new to conducting analysis of vibration at high speed... I see a ton of information on the programming side of things software, although my main concern now is getting the correct 1st place material.

  Right now my apron for the acquisition of data consists of the following: 1) a main office or a laptop with a LabVIEWsoftware platform that integrates a live view of bench test-data acquisition & control, as well as analyses of multiple entries of aircraft during and after the test.  Joined this office/computer laptop peripheral multiples are the following:

  1) dedicated output options control & daq device with 2 semi-PLC data: a) medium... Data USB 1 sample per second... it is for read-only purposes, & b) CAN input/output... 10 samples per second output of data and allows a command input from the desktop/laptop via a CAN of NOR-8473 USB converter.

  (2) NI DAQ hardware entered via MAX configuration.

  My main concern is that I don't want to create a bottleneck for the input of vibration DAQ data.  If I'm looking for a sampling up to 5 000 samples per second max and 200 samples per second minimum for vibration analysis, will I be able to get this amount of data per second using the NI 9233 module through the USB configuration?  I have several USB devices connected to the desktop/laptop PC computer (such as the other USB DAQ modules input/output) will limit these the input of the speed of the NOR-9233 module?

  My next concern is to know how to set up my present VI during the execution taking all the entries data acquisition (which some 1-sample per second, others to 10 samples per second)... when I start taking at a sampling frequency of 5 kHz for the diagnosis of vibration, to, I just average on the other zeros that will be read from other devices?  And then I'll most likely need to add another temporal loop controlled to allow only once 4 / per second output outside remote so no timeout for this device.

  What would be more efficicent this setup for the 9233 module that I could use in a satisfactory manner?  USB, PXI, CRIO?

  Also, is the Sound & Vibration Analysis toolkit useful?  I didn't check yet but it it has a cost of deployment for each executable?

  Thank you.

  I thiink you'll be suprrised with high speed USB features.  For example, when we went out first with CompactDAQ, we put 8 the 9233 modules in a chassis and down them to full (32 channels at 50kSA/sec).

  If you have a laptop dual core, with good USB 2.0 ports, you can use a port for the USB - CAN (which is relatively slower), the PLC is a slow sweep (100 Hz or more) and then a Compact DAQ chassis for all your stuff really high speed, you should be fine.

  It is difficult to reference without having the full application.  My experience suggests all data enter the PC will be the easy part.  How you manage and analyze the data will determine how much control you are able to do.

• Cannot access vCenter 6 licenses after the replacement of certificate

  Hi all

  Ive just replaced my vcenter 6 solution user certificates by using the Certificate Manager tool and computer. All seemed well, until when I unplugged my host in the cluster and when I try to reconnnect, brings me an error on my ssl certificate licensing, saying that my certificate in use is a less secure version lower than 3.

  I tried to access home > license option but the samr error jumped. Then I went to check the certificates that I used and found that they were indeed v1 certificates. However, the generation of the certificate request was made automatically by the tool. I don't have a choice to select the version used. Is this expected behavior? Or is there a way I can change the Certificate Manager to generate a v3 certificate requests? Or is it a totally different problem altogether.

  After a repair, we discovered that the admin of certificate uses the default settings and published the cert for us, which did not include the required extensions for a v3 cert. This caused the vcenter unable to access the license characteristics option.

  A resignation of the cert with additional extensions were made and has been used to replace the previous CERT using Certificate Manager. This solves our problem

• Generate certificates for use with the VMware SSL certificate automation tool

  Hello

  I am trying to use the tool to automate SSL certificate. Our vCenter Server is configured in pulse mode. When I'm trying to generate the request (CSR companies) for Single sing - on (SSO) of certificate signing, option 1 is to provide the FULL domain name. I want to know what domain name FULL should I provide the name of the node or virtual.

  Also I will try to use this tool for other components like updatemanager, inventory service, service of vcenter server, web client. Have experience how to use this tool?

  Thank you

  I successfully replaced certificates for all services. I used the FQDN of the virtual name and not the name of the node to generate the CSR. Thank you

• If you are looking for how to encrypt PDF with certificate

  Hello

  I'm looking for any documentation that explains clearly how encrypt/decrypt; in my case:

  -a person does PDF (with her small hands and Acrobat 9 Pro) and to quantify;

  -the document is attached to a Microsoft Sharepoint Portal;

  -users who have the certificate on this computer can read.

  The idea is to secure the documents inside the area and when the users come back home with a key player that contains an encrypted PDF file, they cannot read.

  I tried in several ways: using AD local certificate made with Acrobat, but even on the same computer with different user profiles, I can encrypt, but not decrypt.

  Any help would be appreciated.

  Please tell me if I am not clear, my English is bad, but my wife is beautiful.

  See Chapter 15 in this doc http://learn.adobe.com/wiki/download/attachments/52658564/acrobat_reader_security_9x.pdf?v ersion = 1

  Of

  http://learn.Adobe.com/wiki/display/security/document+library

• Firefox keeps looking for updates when the new tab open.

  I'm under the latest version of Firefox (40.0.3) with adblocker more like my single addon. However whenever I try to open a new tab it take ages to open because Firefox is constantly looking for an update. It takes 2-3 minutes each time. Did you try refreshing Firefox, uninstall and reinstall without success. My system is 8.1 Win on a Lenovo PC i7. Everything worked well until the last FF update. I have no problem with the same version installed on my laptop.
  Any help/suggestions would be apprciated. Thank you.

  As long as it works. Play well.
  Please report your last post as solved while others will know.