Looking for MC1496 - any custom component library?

Hey all,.

I'm trying to simulate the modulator/demodulator signal MC1496 chip. It seems that this is not standard with Multisim. I was wondering if there was like a library of custom components that the community has put in place (or something of the sort).

I have the part for LTSPICE but (seeing as how I use Multisim for a grand total of half an hour) am not completely confident in my abilities to make imported and put in place correctly. If someone else more experienced with Multisim, I have already made it would be infinitely preferable.

Thank you very much.

As far as I can tell here, the problem is the mapping of the spindle between the symbol and the model. The .subckt uses only the 10 pins, but the symbol has 14. The symbol for the model mapping pin, you have the default assignment - all 14 pins symbol assigned to the nodes of the model.

Based on the .subckt line and the way you have the component cable for the schema, it looks like pins 7, 9, 11 and 13 are not used. You will need for those like 'Not connected' (NC) in the mapping table, correct the remaining pins (PIN symbol 8 will actually be the 7th model node, pin 10 is the 8th node, pin 12 9th node and PIN 14 will be the 10th node - ideally this subcircuit uses the pins in order, it just jumps).

That should fix the mistake of simulation. The error was just because he was trying to use 14 knots for a .subckt of 10 knots. (u1_open_11 is just the name that has been attributed to the simulation of pin 11 node because the mapping of the model says to use it, but nothing connected).

Tags: NI Software

Similar Questions

  • listening in the main application for event from custom component

    I have a component that custom im using an identifier.  I watch videos and tutorials on how to pass variables between applications and custom components. the problem im having is that tutorials or explanation you put the event on the custom component and then it refers to a function in the main application.

    Is a fair way to listen on the main application at the event begins? Ive been tempting for hours and I know there must be something im missing may not be so difficult. any help, I would be really grateful.

    Thank you

    Miguel

    Hello

    The following example has been done as a simple demonstration of States, but the connection (state1) component, is a simple custom event which is sent by the ok button on the connection, the event could be extended to transfer the information to connect to the main application, in this case because the login screen is always public vars or fields of the box would be available for the main application anyway.

    http://gumbo.flashhub.NET/Wizard/ source included

    David.

  • Looking for examples of customized with folder KD with paged results search

    Hello

    I'm looking into writing a portlet that is customized for the search for one or more specified folders of knowledge (Community preferences) directory and display the results, "inline", in a table with pagination. This seems to be a fairly common thing to want to do; and snapshot of search doesn't have the ability to customize the results of how I would like to display.

    It would be fantastic if someone has a code that they were willing to share who does that canned; but I'm really looking for a good example to get results of research via the API (.net) and link these results to a grid to display.

    Any help is appreciated.

    -tomS.

    Hey Tom, shoot me an email and I can send you our code for this canned as well as screenshots and explanations of how it works.
    And Yes, its to .NET and works very well in 6.0 - 6.1mp1, have not yet tested in 6.5.

    [email protected]

  • Looking for a Script in a library to change fleet

    Does anyone know of a resource with a Javascript that automatically alternates the properties of float from right to left?

    I have a list of books with their covers and the graphics are supposed to switch between 'float right', and 'float left'. My problem is that if a new book is in the middle of my tickets, I have to go through all the entries below a new and swap right left. It seems that there should be a script to do this automatically, but I'm just starting to use Javascript in my creations and I am unable to design one myself.

    Use of Pseudo-selecteurs nth child CSS.  This will work even if JS is disabled.

    http://CSS-tricks.com/how-nth-child-works/

    Assuming you are using tags to paragraph for floating containers, your code might look like this:

    {p:nth-Child(ODD)}

    Clear: right;

    float: left;

    Width: 200px;

    }

    {p:nth-Child(even)}

    Clear: left;

    float: right;

    Width: 200px;

    }

    left float

    right float

    left float

    right float

    Nancy O.

  • When I click on my Adobe icon I get a blank screen. I'm looking for a paying customer

    I am a paying customer, but when I try t open my Adobe icon, I get a blank screen.

    Yes, I was helped by chat line K: Nishant... but you have reason, anyone having this problem needs run the cleanup tool to fix it.

  • Pots in the path of a custom component class

    I use the dom4j - 1.6.1.jar in a custom component library, but my JBoss server has dom4j.jar in jboss\server\all\lib.  My custom component is throwing the following error message:

    DefFoundError message: org/dom4j/xpath/DefaultXPath during the call to service XmlToCsvService and convert operation and no way fault proved be configured.

    This makes me suspect that the Dom4J version in the server lib directory is takes precedence over that of my component.  Any suggestions for how to manage this?  Thank you.

    Jared Langdon

    Even the suggestion of Marcel does not always work, but it is certainly worth a quick try.  I remember nothing but try and find one of LiveCycle EAR files has a version of dom4j buried in it (I don't remember which version of LC it was).

    Of course change an Adobe provided EAR is not recommended and can break your support agreement. There is an alternative, however; If you change the JBoss lib folder does not work.  To avoid conflict, you can use Victor to rename the package within the DOM4J class and deploy the jar in your component to avoid the conflict.

    http://code.Google.com/p/jarjar/

    You would then use the classes renamed in your component:

    Import org.mypackage.dom4j.Document;

    Import org.mypackage.dom4j.DocumentException;

    Import org.mypackage.dom4j.DocumentHelper;

    Import org.mypackage.dom4j.Element;

    Import org.mypackage.dom4j.Node;

    Import org.mypackage.dom4j.io.DOMReader;

    Import org.mypackage.dom4j.io.DOMWriter;

  • Looking for tutorials on how to create invitations on Adobe Illustrator. [was: help!]

    I atually I was wondering if anyone knows the best resource to learn how to create invitations on Adobe Illistrator. I looked for all the open classes at my local college even went up to contact a total stranger of facebook that has been a graphic designer of facebook who has not had the time to teach me how to use this program. There must be something you can do to learn these programs hands without going to college to learn how to use them. I surfed on the internet for videos, but none that go into the detail I'm looking for. Any suggestions, classes or local designers who are willing to pay for their time?

    Have you tried Lynda.com?

  • looking for details on the custom for textarea scroll bar

    Newbie here.

    I have a custom component RichEditableText and I want to fix a scroll bar custom to her that I created in Photoshop/catalyst.

    I guess that RET components do not have scroll bars, so I have to wrap it in a scroller.

    Can I use my custom wheel scroll bar and if yes, how can I do?

    I read in the documentation Adobe than anything you can do with the wheel is to replace the scroll bars, but cannot find how.

    RichEditableText implements IViewport like group, so that you can fix your own bars scrolling through the viewport property, for example:

    http://ns.Adobe.com/MXML/2009.

    xmlns:s = "library://ns.adobe.com/flex/spark" >

    If you want to customize the text box scroll bars you should do in a custom skin of TextArea.  If you look at the default TextAreaSkin, you'll see that it uses the Scroller, rather than attach the VScrollBar/HScrollBar directly.

  • I'm looking for the license plan of 3 years for creative photography cloud, but I might just buy an annual license, in any case to buy 3-year license?

    I'm looking for the license plan of 3 years for creative photography cloud, but I might just buy an annual license, in any case to buy 3-year license?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
    Don't forget to stay signed with your Adobe ID before accessing the link below
    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html
    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • How to pass skinclass for custom component?

    Hi guys, I'm moving my main application of my custom component skinClass. Here is my code, but it gave me an error saying "initializer for 'skinType': values of type spark.componets.supportClasses.Skin' cannot be represented in the text. "  I don't know if it is possible to do. Any thoughts? Thank you very much.

    hand. MXML

    < components: loginPanel id = "loginPanel" horizontalCenter = "33" "-15" = Red

    skinType = 'skins. CustomPanel.

    loginButtonClick = "loginpanel_loginButtonClickHandler (event)" / >

    component loginPanel

    script

    [Bindable]

    public var skinType:Skin;

    MXML

    < s:Panel cornerRadius = "5".

    ID = "loginPanelComp".

    "32" = x y = '8 '.

    width = "373" height = "200".

    title = "sign in".

    skinClass = "{skinType}.

    >

    ...............

    < / sign >

    You try to pass a string to match the value of a class. SkinnableComponent skinClass property is a style.

    You must use styles css, or if you want to set this runtime do something like

    private var _skinRef: Class;

    public function set skinClassRef(value:Class):void

    {

    _skinClassRef = value;

    If (loginPanelComp)

    {

    loginPanelComp.setStyle (skinClass, skinRef);

    }

    }

    C

  • Custom component AS3 / the event for MXML Tag definition


    Custom component AS3 / the event for MXML Tag definition
    Expose a custom in the custom MXML tag event.



    I made a custom AS3 component named "CustomListComponent".
    Is a list type component which extends UIComponent.

    When an element is selected (selected) I generate a custom event named, 'selChange '.

    I want the user to be able to use this tag, set a handler on the MXML tag.
    I tried to use metadata as [vent ("selChange")] in the file of AS3 components with no luck.

    Any help / examples to expose a custom event from a custom component AS3 for the MXML tag for the developer/end user would help considerably.

    Anyone? Thank you.

    To send the event in an AS3 component, try the following. The click event is simply to show you the idea. The event generated by the interaction of the user (or programming) could be anything.

    TS

  • Custom component that uses 3rd party library

    Hello

    I'm building a custom component that uses a library of party 3rd in the custom filter class.
    I tried to add the jar file to the classpath for the component, I tried to add the jar file to the libpath to the component, but I do not understand to work.
    I simply get a NoClassDefFoundError when the filter is running.

    Anyone have experience with the addition of libraries third 3rd in a component custom?

    Your help is very appreciated.

    Thanks, Arjen

    Published by: abuising on November 17, 2008 23:31

    Hello!

    I discovered, that editing the custom through the Component Wizard component classpath does not take effect immediately. You must reinstall your component after such changes.

    I would like to know if it works.

    Jakub

    Published by: j.ciszek on 2008-11-18 10:03

    Published by: j.ciszek on 2008-11-18 10:03

  • Looking for a w/SOUND Gmail Notifier. Using Windows 7, Firefox with igHome. Any help?

    I'm looking for a Gmail alert system with the sound. Just a pop-up window is not enough for my needs. I use Windows 7, Firefox and igHome. Gmail is open, at any time, in a pinned tab. Please note that the notifier must have sound advice. Thanks for any help.

    It does wonders for me
    https://addons.Mozilla.org/en-us/Firefox/addon/Gmail-Notifier-Restartless/?src=userprofile

    Gmail doesn't have to be open in a tab. But Firefox must be run.
    Add on has enough parameters to customize it to your liking.

    Maybe not for you but there is also a nice for Google calendar calendar add-on.

    https://addons.Mozilla.org/en-us/Firefox/addon/integrated-Google-Calendar/

  • Any way I can remove the ball that says: you are looking for a printer, no printer not found on startup?

    I ran an 'r' on my new motherboard used, running the same HARD drive and now I guess he thinks that there is a printer somewhere and so... whenever I start the computer I get the pop up bubble looking for material, said OS os BIOS "find printer" and then "no printer not found" I mean it's just a hassle evry time having these "threaten to performance" If you want topics with my XP Pro SP3, basically I just use IE and working relationships. Any suggestion is appreciated.

    Hello

    -Have you ever had a printer installed?
    -You see something unusual in the Device Manager?

    Follow these steps and check if the problem persists.

    Step 1:

    Test the issue in a clean boot State.

    Note: The steps in the article to restart your computer as usual.

    Step 2:

    Uninstall and reinstall the USB controllers.

    http://support.Microsoft.com/kb/310575

  • Why is my music library still looking for missing unknown album everyday now never stops

    Why is my music library still looking for missing unknown album everyday now never stops

    Hello

    ·         You did changes to the computer before the show?

    ·         What Media Player do you use to play music files?

    ·         What is the file type of the music files you want to play?

    If you are using Windows media player, I suggest you to re - index the WMP library by following the steps below and check it, if it helps:

    (a) output Windows Media Player.

    (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

    (c), select all the files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.

    (d) restart Windows Media Player.
     
    Note: Windows Media Player automatically rebuilds the database

Maybe you are looking for

  • Tecra Z50 - A - 11 c: external display do not wake

    Hello I've got Tecra Z50 - A - 11 c and an external display connected to the VGA port.I implemented the plan of power management to turn off the screen after 10 minutes. The monitor turns off after 10 minutes of inactivity.The problem is that is not

  • I can't understand to print a Web page.

    I don't see any how "print" button and the drop-down list on the menu (after clicking the mouse) does not include a print option. Thank you!

  • Satellite a50: Quick Fix Engineering and Windows Update

    I was wandering why some of the quick Fix Engineering published by Toshiba refer to problems in October 2003? for example, the most recent for my satellite a50 is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?I

  • Map to China (Shanghai region)

    Just bought and taken W450 return from the United States to China. Where can I find the file MSO/EMBD for China? Thank you! PS - Cards/OpenStreetMap OSM for China/Shanghai exist and are in fact with good street level detail.

  • How to freeze and unfreeze in the window using Excel from LabVIEW

    Hello I created an Excel report file programmatically using LabVIEW. I do the lines for sheet headers and store data using the program. The requirement that I need is that when the user opens the Excel sheet, the row header should remain fixed at the