Looking for Satellite P100-PSPA3U of the driver for XP Pro SP3

Similar Questions

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• Satellite P100 (PSPA6A-028017) - audio driver for Windows 7

  Anyone know what audio drivers to use for this model on Windows 7?

  Device Manager says "this device cannot start. (Code 10) »
  Drivers listed for it are drmk.sys, hdaudio.sys, portcls.sys, sysfxui.dll and wmalfxgfxdsp.dll which are listed as "Microsoft" and "Windows 7 RTM.

  Various instructions related to various factors (the Toshiba site and elsewhere) that none seemed to do anything.
  None of the drivers on the Toshiba site for this model works.

  Material worked fine on XP before the upgrade to Windows 7.

  Can someone tell me what to use for this chipset drivers or what else to try?

  Hi Jonathan Wilson,.

  I checked the page of Australian driver download Toshiba where your laptop model is listed and it seems that there is no Windows 7 driver for the moment :(

  Theoretically you can also use the drivers from the European page, where you can get Windows 7 drivers for Satellite P100, model nr. PSPA6E.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Re: Satellite L350D - cannot install the driver for the webcam

  I downloaded the driver for the webcam TWebCamera and the icon will now appear in the Windows Start menu. When I try to launch it I get the message that the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. Behind this message, there is another saying that the question is not available, you want that it removed from the list?

  When I try to run the tool from sxstrace flashes a message that disappears momentarily.

  I don't know where to see the event log.

  Hi donal.ocallaghan,

  There is already another thread on the same error message:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62954

  The event log you can find in Control Panel > system and security > administrative tools > event viewer. For each error, you get a detailed report. Check this report and follow the instructions.

  By the way: you try a webcam driver update or what exactly?

• Toshiba Satellite U840W: Cannot install the driver for 4500 envy

  I get the error message 1627. It doesn't have a Cd Player so I can't use the drive.

  It turned out that the problem was with the computer software/firmware.  Error message1267 is a Microsofterror and that of the driver package can be delivered for theplace were that it should be stored. Three adapters is not the computer health check, so I can't tell if it's in the circuits or software, but it certainly isn't for lack of the HP printer.

• Satellite P100 - problem with audio driver on Windows 7 RC

  Hi all

  I have an Australian original Satellite P100 P/N PSPA6A-02N021 (T7200 2 GHz, 2 GB DDR-667, nVidia 7900GTX, 1680 x 1050 display) on which I just installed the latest Windows 7 RC (Build 7100 uploaded on 6 May). After doing a clean install on a new brand Western Digital 500 GB drive, I've had trouble with no output its (error code 10) default driver Microsoft HD audo.

  Because it is a new installation on a disk HARD costs there is no internet connection to research the latest updates during installation. After completing the installation, the search for an updated driver or windows update cannot locate a better driver.

  I updated the BIOS to Phoenix Technologies V4.70 (drawn from the Australian Toshiba site).

  I checked the audio driver which worked perfectly under Vista Business 32 running on this same laptop, and it was Conexant HD audio driver v3.18.051 (dated 04/12/2006). I got this driver on the net and installed under Win7 RC. This driver installed and working, but now I only sound from the left speaker which is very (too) low level.

  What I want to know is, someone at - it else experienced this and how did you solve this problem, or that you have the same or similar Toshiba laptop and the sound works OK or is there another way to do it.

  Thanks in advance.

  Hello!

  I m asking you want to use an OS that isn't out yet and it s only a Release Candidate...

  Have you checked the sound settings on your laptop? Maybe the balance is only on the left speaker.

  To be honest, I think you should wait until Windows 7 will be available and you will find more recent drivers for it, they are compatible with Windows 7.

  Good bye

• Satellite P100-221: problem with driver battery composite microsoft

  Hello

  I have problem with my satellite p100-221! A few days ago I had problems with my audio driver (audio conexant high definition), after starting it was indicates that the pilot of his failed to initialize, I reinstaleed this driver several times and at last it was working OK, but I noticed that windows does not see the battery.

  The small cell in the status bar disappeared and I can not say for how long can I use laptop with battery. Laptop works as if it is connected to the AC. In the Device Manager appeared an exclamation on the battery composite microsoft.

  I tried to renew the drivers but nothing. I deleted combatt.sys and cmbatt.sys in windows\system32\drivers but they appear again. I started in safe mode deleted, but after normal start, they do not appear. I also deleted them in Device Manager, and after start-up, this device did not and do not ask me to install the drivers.

  What can I do?

  Hello

  I noticed that you did a lot of complex changes to your device. You deleted some files, update drivers, etc..
  I guess that your operating system has been enough installed and worked properly.
  Windows XP supports a system restore tool. This tool allows you to roll back the OS to the beginning.
  In my opinion, you should try to use this option. Maybe he'll bring your laptop at the time where everything worked correctly.

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Satellite P100-275: DVD - RAM drive is always detected at startup

  Hello

  I have a problem with my Satellite P100-275, all materials are installed correctly, but when the PC starts, I always "new hardware found" for: hl-dt-st dvdram gma-4082n.

  I tried to install the connection to Internet, I tried with the driver c:\toolscs\DVDRAM software\Setup.exe, but nothing seems to work.

  Here is the screenshot of the hl-dt-st dvdram gma-4082n in materials:

  http://img209.imageshack.us/img209/7326/materialsza4.jpg

  Thank you

  Hello

  Is this original delivered by car or did you upgrade?
  By the way: as far as I know if you use the original recovery with original configuration hardware delivered media, everything should work well. If you change something about yourself, it is possible that something is wrong. Usually, for DVD player, it is not necessary to install a special driver and because of that, I'm a little confused why this message occurs at the beginning upward.

  Please give us more info on this drive.

• Satellite P100-240 includes the numeric keypad, and HD Audio and HD video

  Hello

  I will soon buy a Toshiba Satellite P100-240 of LaptopsDirect with a memory upgrade. It says on the site Web of Toshiba, the P100 is not HD Audio and HD video and it also States that it does not include the numeric keypad. Is - this ture? The processor is good on this machine, I mean like a Core 2 Duo.

  It also comes with Microsoft Windows XP Media Center Edition 2005, is it possible for me to get a buyout of Toshiba site upgrade

  I highly appreciate your replys
  Thank you
  Machanic

  Hello

  > Is the processor good on this machine, I mean like a Core 2 Duo

  The CPU is not better than Core 2 Due because he s successor to core Duo.
  Intel Core Duo processor T2400 1.83 GHz Yonah works on this laptop.
  You can check the detailed specifications of this CPU Intel page.

  In addition the unit supports audio chip type high-definition Intel Conexant CX20551-22.
  I put t know what you mean by HD video.
  Do you mean the HD player? The portable player is a simple DVD Super Multi drive (+/-R Double Layer) and it does not play any DVD HD

  You can also check this Toshiba page for more details:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=119355&Toshib aShop = true

• On Satellite P100-429 replacement hard drive

  Hello

  Does anyone know how to access the HDD on a Satellite P100-429 as I would like to replace it with a new one with a different capacity.

  Hello

  So I Don t know how replace it, but generally, to look to the bottom of the machine, because sometimes there are blankets and behind which covers, there is somewhere HARD drive.

  Welcome them

  I forgot to mention that you have to lose the screws that hold the covers. ;)

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Satellite P100-332: Upgrade HARD drive and 4 GB of RAM

  Hello

  I'm new to the forum...
  Well, I want to change 2 things on my Toshiba Satellite P100-332

  1. I have 2 GB of RAM at 533 mhz and I saw on Everest, as well as on the information that I put up. 4 GB RAM 667 mhz. If I want to ask if theres no limitation about to use a special brand of RAM? Or can I use any laptop RAM to 667 mhz? I buy 2 DIMM 2 GB 667, to stay with 4 GB RAM 667 mhz.

  2 - my laptop came with a 4200 RPM ATA hard drive and I want to know if I can change my hard drive to another as one with 7200 RPM SATA as a http://www.pcvonline.com/productDetails.aspx?prodID=7434 and I have not seen yet if the Board supports, but does anyone know if I can put one like this?

  Hello

  (1) the Satellite P100-332 RAM can be upgraded up to 4 GB and you can also use the modules of 667 Mhz because AFAIK the FSB supports 667 MHz also.
  But the fact is that Windows 32-bit (Vista and XP) would see only 3.2 GB due to the limitation of the 32 bit OS.

  (2) the laptop supports the SATA HDD controller and this is why you must use a SATA HDD. But usually it s no matter if the HDD SATA supports the 7200 RPM. In my opinion, you should be able to use these 7200 RPM HARD drive.

  Good bye

• Re: Satellite P100-160 - failed display driver installation

  Satellite P100-160, PSPAAE, 32-bit vista.

  Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

  The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

  To say that I'm pisseed would be an understatement. Can anyone help? Thank you

  Hey,.

  If Aero is not available I think that it s display driver problem

  In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

  If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

  Check this box!