Looking for screws Qosmio F30 case vor

Similar Questions

• Need a second drive hard "holder" for a Qosmio F30-141

  I bought the second hard drive (Toshiba 160 GB sata) for my Qosmio F30-141. There is no 'holder' (metal platform for mounting of hard disk) in the second slot. There is no "springs" protection too. How - he called and where I can buy things?

  Hello

  The hard drive carrier is available in your Toshiba dealer in your country

  Reference No.. P000457790 ASSEMBLY OF THE HARD DRIVE SUPPORT

  and you need 4 screws to fix the HARD disk and 1 screw to fix the door--:--.

  Reference No.. P000417800 TSCREW M3X4CR 4 live
  Reference No.. P000318000 M2.5X4BN 1 screw

  Note: You can Type the part number in Google and you will find many online dealers
  Kind regards

  Reaver

• Re: Need of motherboard for my Qosmio F30

  Hello! I think it's standard problem - overheating GPU. I can remove the motherboard by myself.
  Where can I find a motherboard for Toshiba Qosmio F30-141 FUHSY2 A5A001825130?

  Have you checked Google?
  Maybe some offers parts for Toshiba laptop.

  Also try contacting the service provider authorized in your country.

• Looking for a waterproof/resistant case for my iPhone 6s Ant ideas?

  looking for a waterproof/resistant case that doesn't see a ton. Any ideas? Thank you very much

  A few people I know swear only by these: https://www.lifeproof.com/

• For Linux - Qosmio F30-111 RAID drivers

  Hello

  I have a Qosmio F30-111 and I need the drivers for the Controller Raid for Linux. Can someone help me.
  I have RAID-0 and the laptop does not start. It displays the XP logo and restarts. So I need to boot from cd or USB key to access or repair the raid partition.

  Thank you
  Antonio Jose

  See also http://newsletter.toshiba-tro.de/main/

• I need BIOS v1.30 for my Qosmio F30

  Im trying to upgrade my Windows XP to Windows Vista. The installation program tells me I must load QOSMIO F30 BIOS V1.30 continuous adjustment. I went to the Web from Toshiba site to load this unfortunately BIOS that I have not found it on the Web site. I'd appreciate any help or suggestions.

  Yahya Al Ethawi MD Hussain
  A neonatologist Doha Qatar

  Hello yahya

  You can find the BIOS and all drivers Vista for Qosmio F30 here: -.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=EU&LNG=5

  BIOS version is 3.90 now and it will work on Vista

  Also, you need to put the RAID on a USB Flash Memory driver and load the driver when you start to install vista, because vista will not recognize your HARD drive unless you do.

  I suggest Vista Ultimate or home edition Premium, Becuae the Media Center and the remote control.

  and if you face any problem after that then please let me know

  Reaver

• Where can I buy a motherboard for Qosmio F30-141

  where you can buy a motherboard for Toshiba QOSMIO F30-141?

  Hi mate

  You need a special Council which has been designed especially for the Qosmio F30-141.
  These motherboards and all compatible parts can be purchased from the Toshiba ASP in your country.

  Here you will find the ASP:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Installation of a second disk in the Qosmio F30

  Hi guys and girls :)

  I just bought the secondary hard drive for my Qosmio F30, but when I opened the drive Bay, I found that I have a problem with the installation of the drive on my hands.

  First of all, I tried to put the new drive in the Bay and press down lightly to connect with power and data connectors sata and it works perfectly, but it is impossible to move the laptop around since the disc is a bit loose in the Bay and I'm worried a little for my data and the drive itself.

  Then, I opened the first Bay and noticed that original Toshiba drive is kept in place with the help of some mount thin metal plate, which is set on the disk and the Bay with a few screws.

  I checked the Web for any revision of the F30 model that might have pictures of the Bay secondary in his State and found a few. See the photos of the same thing Im. Check this one out, it clearly shows the high Bay (sata connectors are right and not visible):
  http://www.Ferra.ru/images/179/179520.jpg

  Note a small screw hole on the left side of the Bay, clearly intended to fix the mounting plate similar with hdd secondary on the laptop. The plate which is, unfortunately, not included with my computer.

  Did someone here had the same problem and if so, how to solve?

  Hello

  As you have already said the HARD drive need a special framework that maintains the 2.5 HARD drive in the Bay.
  This frame and the screws required, you can order directly from the authorized service provider who is responsible for your country.

  I recommend talking to these guys here and explain what you need.

  Best regards

• Qosmio F30-141 - choose RAM models

  Dear all,

  I'm about to buy extra RAM for my laptop! Currently I have by default installed 1 GB model! I give you the model current installed full 1 GB and also who want to buy.

  * Installed _Currently: _ *.

  + SAMSUNG: +.
  1 GB 2Rx8 PC2-4200-444-12-E3
  M470T2953CZ3-CD5 0647

  * _Want to buy: _ *.

  + KINGSTON +.
  DDR2 SODIMM
  Capacity: 2GB
  Speed: PC2-5300 (677 MHz)
  Calendar: CL = 5
  Voltage: 1, 8V
  Memory type: Non ECC DDR2 PC2 - 5300 SODIMM
  Configurations: 256 M X 64-bit
  Pins: 200 - pin SODIMM Unbuffered

  * _QUESTION ARE THE FOLLOWING: _ *.

  -My laptop motherboard supports PC2-5300 (677 MHz) RAM? (See do you buy model above)

  -Si OUI - how it will be installed with default work? Average return?

  - Or better to buy PC2-4200 (533 MHz)?

  P.S. [Qosmio F30-141 | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&highlightOption=123682&P RODUCT_ID = 123229 & DISC_MODEL = 0 #0]

  Awaiting your response on the case!

  Thnaks in advance...

  Hello

  I found a site of memory very useful.
  You will find good memory with straight plug.
  The page displays memory for Qosmio F30-140 but it of the same as the Qosmio F30-141.

  [Memory for Toshiba Qosmio F30-140 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=29637&ft=m&st=3]

  So according to this age, you can use the * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM * memory modules.

  Just to note: you can use modules from different manufacturers. It is only important that you use the modules that support the right specifications!

  Good bye

• Qosmio F30 starts with blue stripes during Vista boot screen

  My Qosmio F30-114 runs for years without problem with Vista Ultimate.

  In recent days, there is a huge problem.

  The Qosmio starts with blue stripes during vista boot screen.

  So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
  For a brief moment, I was very lucky.

  After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

  What can I do?

  The download section of toshiba has no drivers for graphics card.
  And really... I wonder - how it works every year without problems...

  Someone at - it a solution?

  thanx

  toshibalover ;-)

  Hello!

  First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

  I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Need systemboard Qosmio F30-111

  Hello

  I need a new systemboard for a Qosmio F30-111? (PQF30E-00Z00QDU). The video card is faulty. I live in the Netherlands and it is impossible to find a new systemboard. Can someone help me find one or more companies that can fix it like they do in the United Kingdom. In the United Kingdom, you have a company that can fix without replacing the motherboard (http://www.laptoprepair1.co.uk/laptop-vga-video-repair.html), but they only repair it for the citizens of the United Kingdom only.

  Thanks in advance,
  Charles

  Hmm, motherboards are designed specifically for the single computer series laptop and if you want to buy a motherboard for your Toshiba laptop you will need to contact the ASP in your country.
  Guys should be able to order it directly from Toshiba.

  However, you can view some websites like Ebay for a flea market.

  Good luck

• Qosmio F30: Update new BIOS 3.20 3.40 t0 is released

  new bios update published on 03/08/07

  v3.40

  I have already noticed the new BIOS update for the Qosmio F30 but it s always useful f someone post this information here in our small community.

  Thanks again

• Qosmio F30-140 - looking for a new motherboard or 2nd hand

  I bought two Qosmio F30-140 and a half years.

  There are months that my screen begins to blink, poor quality image and other Visual problems. Am went to Toshiba Service - they said your video GPU is not ok, you must change your motherboard, because the video controller is not separated. The price is... 980 EUROS. This is RIDICULOUS.

  However, I would ask you - where can I buy new mb or 2nd hand? Is it compatible with my QOSMIO models? Please for your help, because I'll be forced to throw this laptop voucher. Thanks in advance

  Mladen

  Hey,.

  I think the cheapest solution would be if you buy a second hand motherboard. You should take a look on eBay. Here you can often get second hand spare parts. An alternative, you can also buy a second laptop Qosmio F30 which is defective (e.g. display). You can use the motherboard of your laptop.

  But don t forget that mainboard Exchange isn't easy and you need to remove a large number of screws. It s not as easy as on the desktop.

  Welcome them

• Qosmio X 770 - are looking for best free video player to play with 2D to 3D movie

  I have a Qosmio X 770 with NVidia 3D playback. I'm looking for the best free video player for playback of video clips 2D to 3D.

  Toshiba Video Player works fine, but I can't get it to play files in MP4 - AVC format. Is it possible to add codecs so it will play other formats?

  NVIDIA 3D Vision Player don't play all formats but when in 3D mode, there is no access to the commands. Volume can be set with the function keys and video can be suspended with combinations of keys that do not forget, but you can not fast to the front/back or access the slider to change the video position.

  Both are reasonable solutions, but none is perfect. Is there a better option out there? I tried StereoscopicPlayer but could not operate and it is limited to 5 minutes of play in any case.

  Both are reasonable solutions, but none is perfect.

  Software freeware as a perfect solution?
  I don't think you will get this software just for free...

  How to convert 2D to 3D in 2D to 3D converters movies?
  The KM Player supports also the 2D to 3D feature but does not support all formats... you have to pay for the full version get full support.
  Of course as large PowerDVD, but not for free.