Looking for set up the NI 9233 module, well through which bus?

Similar Questions

• I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  Please see this link

  Non profits

  If your institution not-for-profit or charity meets the conditions above, you can browse the education of Adobe software versions. Once you are ready to buy, you will be asked to present evidence or your qualification status when ordering.

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• Looking for input on the replacement of certificates self-signed

  After many hours trying to find an answer, I now turn to the experts for assistance here.  I have Setup initially vcloud with a self-signed certificate and I am looking for help.  After some research, I was able to create a new key file with my CA-signed certificate.  However, I have problems beyond the portion of reconfigure.

  First off I am struck by the: 1433 bug I had when I initially configure vcloud where the configure script does not pick up the port number.  The workaround for this is to add: 1433 to the host name as it the entrance as the port number.  Now that I'm gone, I get an error NewInstall_preInit sql.  I don't understand not even why I need a "newInstall" as I already have a database works.  Here is my command output, maybe one of the guru here can point me in the right direction.

  [root@vcloud bin] # cd/opt/vmware/vcloud-director/bin/configure
  Welcome to the vCloud Director configuration utility.
  You will be asked to enter a number of parameters which are necessary for
  Configure and start the vCloud Director service.
  Please enter the path to the keystore of Java that contains your SSL certificates and
  private key: /opt/vmware/vcloud-director/cert.ks
  Please enter the password for the key file:
  Please enter the password for the private key for the certificate of "http":
  Please enter the password for the private key for the certificate of "consoleproxy":
  The following data types are supported:
  1 oracle
  2 Microsoft SQL Server
  Enter the type of database [default = 1]: 2
  Enter the host (or IP address) to the database: vmgmt1:1433
  Enter the database [Default = 1433] port: 1433
  Enter the name of the database [default = vcloud]: vcloud
  Enter the name of the instance [default = MSSQLSERVER]: vcloud
  Enter the database user name: his
  Enter the database password:
  Connection to the database: jdbc:jtds:sqlserver://vmgmt1:1433:1433 / vcloud; socketTimeout = 90; instance = vcloud
  loading /opt/vmware/vcloud-director/db/mssql/NewInstall_PreInit.sql
  [2 reports]
  Execution of SQL query error: ' IF ((SELECT is_read_committed_snapshot_on FROM sys.databases WHERE database_id = DB_ID()) <>1).
  BEGIN
  DECLARE @sql varchar (8000)
  SELECT @sql = '
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET SINGLE_USER WITH IMMEDIATE RESTORATION.
  ALTER DATABASE ' ' + DB_NAME() + ' "ALLOW_SNAPSHOT_ISOLATION DEFINED;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET READ_COMMITTED_SNAPSHOT ON WITH NO_WAIT;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET MULTI_USER;
  '
  Exec (@SQL)
  END '.
  java.sql.SQLException: Option "SINGLE_USER" cannot be defined in database 'master '.
  at net.sourceforge.jtds.jdbc.SQLDiagnostic.addDiagnostic(SQLDiagnostic.java:368)
  at net.sourceforge.jtds.jdbc.TdsCore.tdsErrorToken(TdsCore.java:2816)
  at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2254)
  at net.sourceforge.jtds.jdbc.TdsCore.getMoreResults(TdsCore.java:636)
  at net.sourceforge.jtds.jdbc.JtdsStatement.processResults(JtdsStatement.java:584)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeSQL(JtdsStatement.java:546)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeImpl(JtdsStatement.java:723)
  at net.sourceforge.jtds.jdbc.JtdsStatement.execute(JtdsStatement.java:1157)
  at com.vmware.vcloud.configure.Db.executeSqlBatch(Db.java:231)
  at com.vmware.vcloud.configure.Db.executeSqlScript(Db.java:190)
  at com.vmware.vcloud.configure.Db.createTables(Db.java:142)
  at com.vmware.vcloud.configure.Db.maybeInitialize(Db.java:301)
  at com.vmware.vcloud.configure.ConfigAgent.configureDatabase(ConfigAgent.java:1631)
  at com.vmware.vcloud.configure.ConfigAgent.start(ConfigAgent.java:396)
  at com.vmware.vcloud.configure.ConfigAgent.main(ConfigAgent.java:295)
  Communication with the database error: Option SINGLE_USER cannot be defined in the master database.

  Just a stab in the dark - the guides call say use a user for vcloud (named: vcloud) not "its".

  Our vcloud database user login has a default instance of the vcloud database.  Maybe this will get around the question (seems to me that THE default connection is master - and before the change of the "vcloud" database scripts he tries to put in single-user mode.

• Looking for hope in the restoration of my iMac

  My iMac HD has failed, and I took it to Apple to get it replaced. I had a Time Machine backup on an external hard drive Seagate. But my iMac just not see the backup drive Seagate. I don't know if there is a trick to getting the Seagate HD displays. It does not show in Finder or in disk utility. But when the iMac HD was not, and I looked for ways to restore, I saw a Time Machine backup date. Now, I can not see the drive. Even though I have the music and pictures stored in iCloud, all my apps are now gone. I don't know where to start. I was a fool to trust Time Machine? This is literally disastrous for me, and I don't know where to start. What I need, is to see this backup disk somewhere BTW, I plugged on another iMac and he did not see it either. Is there some magic for Seagate HD?

  Some things you can try:

  * Open the Finder preferences (under the Finder menu, top left of your screen). Make sure that on the general tab, the boxes are ticked for hard disks and drives, to show them on your desktop. Otherwise, they won't be visible.

  * Try a new cable. The cable went wrong.

  * Open disk utility when the drive is connected. You can see on the left hand side of the disk utility? If you see an external drive, try to mount in disk utility. If you can ride, the files are available? If this isn't the case, you can run disk utility to try to fix it.

  * Seagate's data recovery services.  http://www.Seagate.com/services-software/recover/ first of all, you can download their software and try it for free. If it can find files on the disk, you can then purchase the license of their recovery software to use to recover your files from the Seagate drive. Alternatively, he can perform the data recovery for you (with supplement). The details are at this link.

  I'm sorry it happened, I wish you good luck.  It seems that your problem could not Time Machine, which is actually a very good backup program; but rather, your external drive seems to have a problem. This happens to all readers subsequently, no last forever and that's why I try to keep at least two backups, each with a different method. For example, one with Time Machine, the other using software such as "clone" (such as SuperDuper, CCC etc.). It is good that you use the cloud at least. I hope that you can recover your files.

• Firefox keeps looking for updates when the new tab open.

  I'm under the latest version of Firefox (40.0.3) with adblocker more like my single addon. However whenever I try to open a new tab it take ages to open because Firefox is constantly looking for an update. It takes 2-3 minutes each time. Did you try refreshing Firefox, uninstall and reinstall without success. My system is 8.1 Win on a Lenovo PC i7. Everything worked well until the last FF update. I have no problem with the same version installed on my laptop.
  Any help/suggestions would be apprciated. Thank you.

  As long as it works. Play well.
  Please report your last post as solved while others will know.

• Is there a search function in Firefox? I don't mean Google or Yahoo; I want to look for something in the URL to the screen. Thank you.

  I am looking for lamsabible.com for a specific verse and chapter. The URL is displayed at the top of the page: Note: to go to a certain chapter in a book, use the function "Find" of your browser to search for "2:1" for Chapter 2, 40: 1 "" chapter 40, etc.. ".

  No problem, I'm happy to help you ^_^

• Looking for location of the thermal sensors on r61i

  Hi all

  My r61i 7650 (EGG) - previous with win7 as now with ubuntu 10.04 - used to start the fan early and kept running most of the time when I was intense (for example virtulalizing win7 as a guest).

  In order to have less noise, I tried tp fan control and it works great, but I wonder what temperatures to choose to 'wake up' the fan. The problem is that I know the temperature which places and which hardware sensors measure. And, what is more, I don't know, for example how hot that my gpu or anyone is allowed to become.

  In tp, fan control are listed following sensors:

  Sensor 0 - I think it is the cpu (the hottest part)

  Sensor 1

  Sensor 4

  Sensor 6

  Sensor 8

  Sensor 9

  10 sensor

  Of course, I'm looking for sound values to do not risk damage, but I do not accept the fan from when the cpu is at 35 ° C warm... ;-)

  I searched for information at thinkwiki, wiki.ubuntuusers, but did not find so many useful information for a _r_61 and google was not my friend...

  Any help appreciated

  see you soon

  Michael

  Do Lenovo release these figures of thermal tolerance. However, 53 degrees are in the temperature interval. I run my R61 at these temperatures a lot for a few months, when I left it on doing some computation intensive matlab of CPU on my laptop R61.

  Personally do not let the temperature exceeds 60 degrees for too long.

  Lenovo puts a lot of R & D in the thermal management thinkpads and tolerances.

• Looking for wifi on the device icons.

  Hello, I am trying to access the icons used for the wifi on the device. I am referring to those who get green lines depending on the power of the PA (with or without a sign of blocking). Any idea where we can get?

  I think that the device are more active that were previously accessible as well. I have attached those you are looking for (I think) as a zip, got all the icons of 1846 while they were still there

• Looking for results of the DAP for historical purposes

  In order to eliminate some of our dynamic access policies, I wonder if there are DAP journal entries? I see the DAP hits in my newspaper in real-time, just Viewer, it does not provide a lot of information. Specifically, I wonder if one of our users use EOL operating systems like XP and Ugh, Vista.

  TIA,

  Lee

  Hello

  You can see windows build version within the track of the DAP if your ASDM log viewer is set to the debug level.

  For example, here's a screenshot of the AMPS journal on a successful AnyConnect connection Viewer:

  Windows-7-dap - trace.png

  

  We can see the following example:

  A. the unit is a feature of Windows.

  endpoint.anyconnect.platform = "win"

  (B) the version of the platform is "6.1.7601 Service Pack 1".

  endpoint.anyconnect.platformversion="6.1.7601 Service Pack 1"

  Once we know the version of the platform, we can get the name of the OS references it to this table:

  Operating system	Version number
  Windows 10	10.0*
  Technical overview of Windows Server 2016	10.0*
  Windows 8.1	6.3
  R2 Windows Server 2012	6.3
  Windows 8	6.2
  Windows Server 2012	6.2
  Windows 7	6.1
  Windows Server 2008 R2	6.1
  Windows Server 2008	6.0
  Windows Vista	6.0
  Windows Server 2003 R2	5.2
  Windows Server 2003	5.2
  Windows XP 64 - Bit Edition	5.2
  Windows XP	5.1
  Windows 2000	5.0

  Official link to table:
  https://msdn.Microsoft.com/en-CA/library/Windows/desktop/ms724832 (v = vs. 85) .aspx

  From the information in the table, we know that the customer who connects runs Windows 7 SP1 or Windows Server 2008 SP1 since theversion of the platform"starts with 6.1.

  Let us know if this helps!

  Please note useful messages and mark the answers accurate so that the community can benefit from *.

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• ADF Faces 11.1.2.4: Looking for information on the dynamic menu options and MDSMenuModel

  I'm looking for the feasibility of making the model default menu (created by the intermediary to generate xml based utf adfc-config file. XML) using other components of navigation as an af:panelaccordion. It does not look as if it was possible to create it is similar to the menu tutorial Dynamics navigationpane. I found no documentation useful about the MDSMenuModel and inspect, iterator returned object class hierarchy, they all point to the classes in the package org.apache.myfaces.trinidadinternal.menu (red flags). I would like to hear suggestions on how to proceed to those of you who have implemented this type of functionality. Thanks in advance.

  finally found the solution. for all those who are interested, here is a screen for my menu which can be dynamically rendered through several components of the tree based (currently using trees table Viewer and dvt of hierarchy).

  http://i.imgur.com/a8a5EyJ.jpg?1

  On the other hand, the accordion menu is slightly different depending on the details of my original question. The trick was to use the EL evaluator to decipher appropriate methods to call on the MDSMenuModel. The final expression to the next level for the value of the loop has become:

  #{menu_module_category.wrappedData.wrappedData [0] .children}

  marking correct because I deserve it!