Looking for startup (restoration) for HP a1247c Media Center PC records

Similar Questions

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.

  Hello

  All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.

  And even if I did not restore the system off, there is no restore point on my machine.

  So I'm always searching in google and microsoft.com but a little lost right now.

  Moccan,
  Thanks for posting on the Microsoft answers Forum.  I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325.  In particular the section more information, which has this:

  If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  1. Click Start, click run, type appwiz.cpl, and then click OK.
  2. Click to select the Show updates check box.
  3. In the currently installed programs list, look for the following element:
     Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Update for Windows XP Media Center Edition 2005 Rollup2

  Received the following error message when you try to connect to XBox Live. "There is a problem with the installation of Windows XP Media Center Edition 2005.  Uninstall the update for Media Center Edition 2005, and then re - install the update from the Windows Update site. Re-run the installer to XBOX 360. »

  I uninstalled the update for Windows XP Media Center Edition 2005 rolllup2, but when I go to Microsoft to reinstall, I am sent to install Windows 7.  I am using Windows XP and do not want to upgrade to Windows 7.  How can I get the update to Media Center Edition 2005 for Windows XP?  I can't configure the XBOX 360 without it.

  Hi Frustratedalso,

  Follow the steps listed in the link below: error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005": http://support.microsoft.com/kb/954622

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Product key for Windows 8 Media Center?

  I tried 3 or 4 times to get a product key for the Windows Media Center 8.  The internet news shows it is free until January.  January is almost here and have not received my key yetI. Have waited much longer than 72 hours, said the instructions.and have checked my junk mail also records. Any ideas?

  Hello GeorgeRucklos,

  I'm sorry to hear that you have not yet received your Media Center key. Orders are processed and you should get your free product key very soon. We thank you for your patience and we apologize for any inconvenience this may cause.

  Sincerely,

  Marilyn

• Restoration of disks for HP M7250N Media Center XP

  I have a HP Media Center Desk Top System Mod # M - 7250N who has Win XP Media Center 32 bit single core cpu Intel 2.8 and 4 GB of ram installed. I bought the computer new from Best Buy a few years ago. I had a breakdown of complete hard drive a few weeks ago. I'm looking for my restore disks but could not locate them. I contacted HP support and was advised that he would convey restore disks to me when they become available. It is some time now with no response and I don't think that I will get no help on that date. My wife uses the system of family history research and I was after her forever to save things, but that was not done.

  Hi, Terry:

  You probably know more to get the HP recovery discs I do since you called them and they said they would send them when back in stock.

  The problem with that is that they're probably never coming back back in stock.

  However, this place has a set of $27 + shipping costs.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=2696

  .. and Yes, your PC can run Windows 7 well. I checked the specifications and all the hardware is windows 7 capable.

  Alternatively, you can check for yourself by running the free W7 Upgrade Advisor from Microsoft. All your other stuff connected and turned on like printers, scanners, etc.

  The program will scan and report his ability to work on W7.

  Here is the link to this tool.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  However, from the cost point of view, it would be cheaper for you to order a set of recovery disks.

  Kind regards

  Paul

• Satellite A100: Need drivers for Windows XP Media Center Edition

  Hi there, hoping someone can help me, just bought Windows XP Media Center Edition, had home installed, installed a new and I'm missing some drivers (Ethernet controller, mass storage controller, network controller, PCI device and video controller VGA)

  I have a satellite A100 PSAA9E and I was wondering if there is no driver for this edition of windows yet or if there is no alternative that is pro XP drivers should work?

  Thank you
  Andy.

  Hello

  On this page of Toshiba, you will find drivers for different units.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Win MCE drivers are not available for Satellite A100, only Win XP.
  Jasmin said, you can try to use the Windows XP drivers as the Win MCE is a WinXP with additional features.
  Check it out

• How to make windows for windows xp Media Center

  need help get windows media center for windows xp

  Windows Media Center is not available for Windows XP.  First, Windows Media Center was included with a special edition of Windows XP called Windows XP Media Center Edition , which is no longer available.

  You must upgrade to Windows 7 Home Premium to Windows Media Center.

• where can I get a video decoder for win xp media center so I can pick up a signal from TV

  I use to be able to pick up a signal from TV, but since a new reinstall of xp media center I can not get a signal - the message says that I need a video decoder, where can I get this article

  Hi davidwiddecombe,
   

  A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding). Some codecs include both components and some codecs only one of them.

  Use your favorite search engine and browse for such a program which is used to.
   

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Cannot install roll 2 for windows xp media center 2005

  I have a hp media center M1080N desktop computer, I checked my media center and found that I "Windows XP media center 2005, Version 5.1.2700.2180, without mention of Roll Up 2 for windows. I tried to install it and it has not tried 3 times. It all started because I tried to install the Zune software and couldn't. because I need drive for windows 2. My question is why I can't install roll 2 for Windows XP? This is the only update that I can not install.
  .

  http://support.Microsoft.com/kb/900325

  Release date: 14 October 2005

  Read the section more information in the article to see if it applies to you.

• Windows XP Home installed, but I have a product key for Windows XP media center 2005

  A month ago, my laptop computer motherboard fried.  I bought a similar laptop with no hard drive and a screen broken off of ebay and tinkered together in a working computer.  However, I have Windows XP home on the hard drive of the old computer and a Windows XP media center 2005 sticker on the new product key.   Product key update tool Windows won't let me upgrade to the new key.  Is there a way for me to update my windows media center Edition, so that the key work?

  "Woogie1" wrote in message News: 52fbe66b-45ee-4613-ad9d-c992574a5433...

  A month ago, my laptop computer motherboard fried.  I bought a similar laptop with no hard drive and a screen broken off of ebay and tinkered together in a working computer.  However, I have Windows XP home on the hard drive of the old computer and a Windows XP media center 2005 sticker on the new product key.   Product key update tool Windows won't let me upgrade to the new key.  Is there a way for me to update my windows media center Edition, so that the key work?

  What a pleasure - this really makes the license issues a joy.
  If I understand you right, "fried" your old computer was XP Home Edition - and the replacement motherboard came from a machine with MCE?
  If so, then Yes, you must use the MCE license, rather than the home one. To be entirely legal, it must also have the sticker COST MCE glued to the box.
  MCE is XP Pro - which is a reason that you can not change just the product key-based. The other is that the update tool simply is not designed to work with MCE.
  What can you do?
  Unfortunately, there is no way around it, whatever you do will involve a clean install (to backup your data first led outdoors!) If you want to stick with MCE.
   
  (1) you can go to the manufacturer of the MCE machine and ask if they can provide the recovery disc for this machine - if you're lucky, they may still have some in stock. If they are not, try restoredisks.com
  (2) you can take your life in your hands and download a torrent of a set of installation MCE - it's going to be at least two CD there are a couple of "real" out there, who are free of malicious software, but most is contaminated in some way, so be very careful and do due diligence on any download you.
  (3) you can try to find a legitimate MCE pack on sale somewhere - I don't know what it should cost, or that also the prices on them are moving from MS stopped making years and they are like gold dust. (XP Pro prices are rising, but I suspect that MCE prices may be down).
  (4) you can purchase a legal license for XP Edition family - again, be very careful where you buy-it came to a point where there are more counterfeits than legal market. This would allow you to use the update tool to keep your current installation.
   
  Note that there is no such thing as a 'detail' MCE - MCE all licenses are OEM and as such, cannot upgrade a XP Home license, where my earlier warning about backing up your data.
   
  HTH
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• The guide to "Help and Support Center" installed for Windows XP Media Center 2004 is largely outdated and must be updated.

  I have version Dell of Windows Media Center 2005 (service pack 3) installed on my XPS 600 desktop computer.  The installed Help and Support Center guide date for use with Windows Media Center 2004 and has never been updated to include most of the changes system over the past six years. Dell or Microsoft should be responsible for the update of the guides or instructions that are installed on the operating system. Not only that, but Media Center and Movie Maker themselves also grossly neglected as updates are concerned.
  The currently installed Help and Support Center guide is missing details on significant changes to Windows applications and utilities.  I rely on up-to-date information to make changes to my OS applications and utilities.  There is a lot of information in this guide that is incomplete and misleading and therefore not very reliable.
  I have an OEM of Windows XP version and I wonder if there is an update of current or replacement for this system guide and who is responsible for the update.

  Nothing in XP will be updated. The current Windows operating system is Windows 7. XP is already three iterations of the windows behind. A great substitute for the XP search feature (which was never very good) is Agent free Ransack.

  http://www.Mythicsoft.com/agentransack/ MS - MVP - Elephant Boy computers - don't panic!

• Where can I find the implementation hints for my xbox media center-8 digit code working on my vista sony VAIO VGC LS30

  I have a XBOX360 and it's hooked up to my Sony VGC LS30 all-in-one with an audio and video entry for my Media center and it asking me to place and extension and when I do want a 8 digit code? where can I find the code to 8 digits.

  Thank you

  Jimmy

  Hi Jimmy,.

  I suggest you to send your request in Forums Xbox to better support:

  Xbox forums

  For more information:

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  Configuration of your Xbox 360

  Set up a Windows Media Center Extender device