Looking for table 1, D with the first occurrence

Similar Questions

• Looking for Toshiba bluetooth SDK (with the HDP profile)

  Hello

  I asked bluetooth SDK 2 months ago, and I have no answer.

  I would like to develop an application (for academic purposes) to establish a connection with an A & D blood pressure monitor by using the bluetooth Thosiba stack and the HDP profile. Anyone developing any similar application? Is there a person with Bluetooth SDK I can contact?

  Thank you
  Santiago

  Have a look here:

  Perhaps this page can be useful if you need the SDK software Toshiba Bluetooth Stack
  [Request for Toshiba Bluetooth Stack SDK | https://aps2.toshiba-tro.de/bluetooth_sdk/Bluetooth.aspx]

  I hope this helps!

• I want to build a pc for better video editing with the soft first Adobe pro and Adobe after effect. Should what kind of material I buy for it. If you suggest me pls.

  I want to build a pc for better video editing with the soft first Adobe pro and Adobe after effect. Should what kind of material I buy for it. If you suggest me pls. my budget is about $2500

  You will have problems in the construction of a 99 X system for this budget. You need 32 GB of ram if you do that will be a large part of the cost with DDR4 right now. If you have a room on the X 99 budget would certainly be the way forward. The 5960 X is the best processor out right now but $1100 will probably push your budget. The 5930 K would still work and a much better price for your budget. I suggest: 970GTX with this budget as well. Forget the Xeon V3. They are out of your budget and not worth the price with this budget in mind. You can get a system much better with the I7 Haswell E chips.

  Eric

  ADK

• Topics by opening the first occurrence in the table of contents

  Background: I created HTML5 Responsive help using HR 2015 for a web application. I organized the Hep role, then pages with these roles, users can access, and then by the tasks users can perform on this page. In many cases, a subject is listed under multiple roles and reuse and efficiency, I just dragged the same theme in the list of the topic in the table of contents as appropriate.

  I also used the text conditionalized on table of contents by role level. Using the example below, I have conditions for physician, nurse, and Patient, but I don't think that this is part of the issue well. Conditionalized roles were created for filtering purposes.

  Question: I have the overview topics that include hyperlinks to headings in red in the example below for each role. When a user clicks the hyperlink in this topic of presentation, he brings them to the FIRST occurrence of this topic in the table of contents, not the link that is associated with their role. When a user with the role of the Patient is in the topic view of their role and click the hyperlink 'Research for patients', help opens on this subject, but the "Searching for patients" in the topic role of physician in the table of contents on the left is highlighted.  Not a show-stopper, but it is confusing for users.

  Also, we had originally planned to use the filter feature to filter role help topics. When I filter to view only a specific role (nurse) and do the steps above, by clicking on the Preview 'Search for patients' hyperlink opens but there is no highlighting in the table of contents because this first occurrence is hidden in all the subjects physician.

  Note: This problem does not occur when I generate the content as WebHelp.

  What I want to do: When the nurse click on the hyperlink for 'Research for patients' of their overview topic, researching topic of patients is open and the search for patients is highlighted in the table of contents under the nurse, not the first occurrence (doctor).

  Questions: Is this a bug or is it repairable? And is it possible to fix it without creating the specific role of topics such as finding doctors for Patients, nursing research for Patients and so forth? I tried to delete the table of contents and start again, but the problem persists.

  Here is an example:

  Doctor

  Patient portal page

  Overview (contains links to sections below - view patient demograhic data, looking for patients, to renew orders)

  Display of the demographics of the patients

  Looking for patients

  Renewal of prescriptions

  Nurse

  Patient portal page

  Overview (contains links to sections below)

  Display of the demographics of the patients

  Looking for patients

  Display of orders

  Patient

  Patient portal page

  Overview (contains links to sections below)

  Update your demographic data

  Display of your prescrpitions

  My opinion would be that this is the expected behavior. My theory is that there is no information within the syntax of hyperlinks. A hypertext link is encoded such that when you click on it, you are taken to the landing page, as if sending the message "find the page named and post it by the specified parameters. What is happening is that the hyperlink goes to the first instance of the HTML page in your table of contents (.hhc file). There is no intelligence, he doesn't "know" that you are in the doctor or the nurse section - section he knows only that the page specified in the table of contents is listed in the file and thus, it only takes you there. The syntax of hyperlinks don't "know" where you are in the help system.

  I just also wanted to report the fault of strike in the Patient section, look a your orders of your example, assuming that you have copied and pasted into this thread.

• Dynamic action for validation of date with the notification message plugin

  Hi all

  Someone help me please with dynamic action for validation of date with the message notification plugin. I have a form with two elements of the date picker control and message notification plugin.

  The requirement first user selects the exam is finished and then selects the date. So, if the date is greater than the date of the examination is over + 2 years then doesn't trigger the message notification plugin. I tried to create that dynamic action on the date picker date that triggers the scheduled issue notification message but I want to make conditional, I mean displays the message only if date of the selected is greater than the date of the exam is finished more than 2 years.

  In terms simple, notification is displayed only if provided is superior to (date of the exam is completed + 2 years).

  I use oracle apex 4.0 version and oracle 10g r2 database. I tried to reproduce the same requirement in my personal workspace. Here are the details. Please take a look.

  Workspace: raghu_workspace

  username: orton607

  password: orton607

  APP # 72193

  PG # 1

  Any help is appreciated.

  Thanks in advance.

  Orton.

  You can get the value of the date of entry:

  $(ele) .datePicker ('getDate');

  So what to add functions such as:

  function validateNotification (d1, d2) {}

  Date1 var = $(d1) .datepicker ('getDate');

  date2 var = $(d2) .datepicker ('getDate');

  if(date1 && date2) {}

  return ((date2.getTime()-date1.getTime())/(1000*24*60*60))>(365*2);

  } else {}

  Returns false;

  }

  }

  The logic based on setting (I have two years from years of 365 days preceding)

  Then in the D.A. specify a JavaScript expression as:

  validateNotification ('P2_REVIEW_COMPLETED', this.triggeringElement.id)

  Refer to page 2 for example.

• How to increase the performance of the computer with the first?

  I have problems with rendering long time drops latecomers / jumping and audio on complex changes with Premiere Pro cc 2014 even with active CUDA.

  I would like some advice in the adobe community for what first put on my computer for him to run more smooth with the first and the rest of Adobe programs.

  My system specs are:

  Windows 7 64 bit

  8 GB RAM

  NVIDIA GeForce GTX 550 ti GPU (drivers day)

  Intel core i5 processor clocked @ 3 .00GHz

  I was informed of some friends IT computer and some players that I would see the further performance with a better graphics card. But after the execution of the afterburner msi program to monitor the use of all during an export of a short film he showed the CPU 96-100% most of the time when the GPU only varies from 38 to 54%

  If the first is the use of CUDA, so the GPU use should not be much higher? Maybe I'm missing a setting that I need to tinker? Or do I really have to invest in a better processor?

  Thank you for all what is recommended can offer me!

  -Taylor

  There are SO many things that could in how any computer running these programs... In the "Presentation" of this forum page, note in a Panel on the right side, the "Hardware" forum... Please go ahead and ask a few questions. In addition, the Tweaker ( Page of tweakers ) Page is a vast resource of information, tests and test data.

  Basically... first thing to note is the CPU, the number of cores is cache, clock speed, then the way the motherboard integrated this into RAM, video card, & home readers (the bus system & drive connections), then the GPU and the table of drive you are using.

  -CPU: more hearts always better of course, and "virtual" cores do not count. Your i5 is a minimalist for the Adobe DVA. My i7 is a little better, but still not nearly "ideal." Mine has so-called 'eight' hearts, but four are virtual... not true. These programs will be in cloth the real parts of the processor, there is no extra wait States to charge things to put cache & back into 'virtual reality '. Clock speed is of course a biggy and not only as high as you can go, but settled at a speed that works best with the system bus & the RAM and the GPU. There are ways to understand this saying, of course. It's complicated.

  -RAM: 8 your casual work is barely enough for the operation. I'm 16, and it is nowhere near enough. 32 is pretty decent, and I drool on people with 96 + GB of RAM and a mobo which uses actually all this.

  -Mobo: the flow of the thing... and the flow over your mobo has through the system bus/s best. And such things like... how many connections drive there? You will eventually need to connect disks 6 or 8 for best performance... can you, without the data to all readers bunging autour each other on the bus to the mobo?

  -GPU/vRAM: get a hot card is cool... but ONLY if your machine can handle it. My GTX770/4 GB of vRAM is really a little overkill for my current system. Understatement. A good GPU for the use by you (it has graphics on the page of the Tweaker) with a few GB of vRAM and nuclei of a CUDA AREA traveling at a pretty decent speed when matched to the CPU/system frequencies... Yes, the good card is awesome... too card is a total waste of money, too little and you have created a choke point. GPU is only used for certain things, isn't quite the Holy Grail we often think that it is.

  -Readers: There are a LOT of read/write of data going on constantly. USB3 is NOT sufficient for reading/writing, but it can work very well for reading only, like the standard images (but not 4 k stuff). Essentially, readers must be connected to the mobo directly... and a very recommended layout is OS/programs/pagefile on a FAST SSD large (and no, they are not all the same); Another SSD for things like the previews, cache & database PrPro files and then be separate discs for the projects, footage, & exports or even better a hardware RAID 0 of 4 or 5 2 TB hard drives for files in project & footage.

  As we always say on the Page of the Tweaker, the system runs faster the point of choking more slow. You have to understand that one...

  Neil

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

  Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

  Give me the link or something where I can download the drivers...
  
  Thank you

  Edriss Dave

  HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

  Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

  . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

• looking for a way to change the font color in the hotmail to chat Messenger?

  I am running windows internet explore 9 and you are looking for a way to change the color of the font in hotmail to chat Messenger, can anyone help with this. You can email me at * address email is removed from the privacy * where I am away from my computer.

  Hello
  The question you have posted is related to Windows Live and would be better suited to the Discussion Windows Live groups. Please visit the link below to find a community that will provide the support you want.
  Hotmail Portal
  http://windowslivehelp.com/product.aspx?ProductID=1

• I am looking for camera wizard compatible with toshiba satellite a300

  I am looking for camera wizard compatible with toshiba satellite a300

  This is an English forum. Click on the globe at the bottom of the page and select your language.

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• BlackBerry Smartphones looking for a way to cancel the encryption function

  The pictures I take with my BB 9780 "BOLD" are encypt. I'm looking for a way to cancel the operation of encryption on the new photos. Please notify.

  Try this page...

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

  This is the latest version.

  Tom

• Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  SAMT

  Removal of watermark Adobe Premiere elements 14 test of the project file... Open the project file of 14 trials in 14 items purchased and then first Expert rendered workspaceTimeline Menu/delete the files. Then restore the timeline content.

  You can not remove the watermark from Adobe to an export of the trial even after you bought the product.

  Some of us have found that just opening the project of tryout in removes it from Premiere Elements purchased the Adobe watermark. Determine the way that works for you.

  Please let us know if everything above worked for you.

  Thank you.

  RTA