Looking for UPGRADE M18x GPU

Similar Questions

• Looking for upgrade my 8500 GT 640 XPS

  I guess that it's that time again when it is necessary to upgrade my GPU.  Since I'm a video card recommendation excellent last time when I upgraded my XPS 410, I thought that I ask again this large community of my 8500 video card recommendation.

  I'm looking to upgrade the video card in my XPS 8500 Vidia GT 640 stock with something more modern (e.g., 2 GB of memory).  I'm doing a moderate amount of games, so I need something that will give me a good framerate when executing a shooter like battlefield game 4 or CoD: Advanced Warfare on the spot (or Elite: dangerous on ultra if possible).  I don't have to spend a lot of money, maybe around $100?  I want something that will be easy to install and doesn't give me headaches down the road too (I don't like to mess with my bowels of PC too .)  In other words, a simple but good card for a modern game that will work very well on my XPS 8500.

  Any suggestion would be appreciated.  Yet one time, last time for my 410 I got a great recommendation of the community, so thanks for that!   Hope for another good move once again!

  Crusader Scott

  I don't have to spend a lot of money, maybe around $100?

  you didn't say what you are playing to the resolution. 1920 x 1080?

  The price level of $100, it is difficult to get a really solid card for games, and I'm not sure that you will have the games you listed to 1080 p to work really well.

  two options are an nVidia GTX 750ti or an R7 AMD 260 X, but both are a little more than $100, say around $ 110 to $ 120

  Price $150 of best options, point you could get a 660 GTX or a R7 270 X

  I think that the best price/performance ratio would be if you can find a GTX 960 on sale for about $180-185 $

  I think that these work without problem in the XPS 8500, but I searched this forum for sure.

• Looking for upgrade

  Hello.

  I own a Lenovo u450p, and was hoping to upgrade the RAM and the graphics card.

  I was wondering if it was possible and, if so, what would be good to upgrade to? I'm looking for sufficient capacity of RAM/graphics card to the success of games like Team Fortress 2, Portal, Mass Effect, etc. on the graphics settings at LEAST medium.

  Thank you.

  I have no experience with external graphics cards, but it can be an altnerate for the upgrade solution if it is compatible and carry the necessary specifications for the games.

  If you just want to make more playable games, upgrading your RAM will not help in this case. It will add a bit of your longevity and open responsiveness for applications if you are fond of letting a lot of things, but the bottleneck is certainly the integrated video card.

  Good news is that source games do not have high demands and therefore a lower end dedicated graphics cards are generally able to read on support (even the Intel HD 3000 integrated graphics card can play L4D upstairs, according to notebookcheck). It is much easier (but of course more expensive) to purchase another laptop with a better card built in. Not sure, the value on the external card, but I hope it works for you.

• Looking for upgrade m7260n information

  Hello.  I have an old m7260n.  Looking to update everything that I can to handle some of the latest video games:

  I understand that I have my system will take care of 4 GB, but do not know how fast RAM I should get.

  I want to upgrade the processor and would like to know how to determine what CPU improvements will work with my motherboard (which I think is an Asus P5LP-, but not sure).   Also, how the decision factors in choosing a CPU.

  I definitely want to update the graphics card (currently: ATI Radion x300se, 128 MB of DDR memory).  I consider the upgrade to a dedicated graphics card, but don't know if it's possible, or how that will affect my computer when I use it for other basic things.

  I also wonder if I should get a faster hard drive (not sure how to check how fast mine is), or if any solid stare disc would work in my old computer.

  Thank you for helping me to upgrade my computer.

  -Tyler

  You need to open the side panel... If the power supply is 300 w, you don't need to replace it... Basic graphics card works perfectly...

  and yes it will be able to play games... computer lower end of absolutelly will work for general operations...

• Looking for upgrade CC2015 with software running on Mac 2.

  I'm looking to update the CS6 Master Collection to some form of Creative Cloud 2015. I'm a small business single with two computers: a desktop computer and a laptop, so I'll need a license to use the suite on both computers. Which plan is best for me?

  You subscribe to subscription individual creative cloud. using which you can activate CC apps on 2 computers.

  If you use 2 computers only, then Normal individual plan is more than enough.

  See the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• Looking for upgrade to CS6

  I have CS3, how to CS6?

  Since January is no longer a way to upgrade from CS3 to CS6.  You will need to purchase the full version of CS6 or subscribe to the cloud on a monthly basis.

• Recommendation for a cheapo GPU to throw in the old editing area

  Full disclosure: I did only a very little bit of research, because I like not on hardware like most of you guys here do

  Knowing full well that I take my fate in my hands, I'm looking for the best GPU that I can throw in my old HP (dual Xeon 5140 s) xw6400 and hack for some MEPS hardware Lovin '. My office (heh), would that be the GTS450 probably the best bet, since it does not require a power supply additional connection, blah blah blah. This system will be requisitioned for some just large enough SD projects that are not too heavy effect, but I want material MPE in any case for the CC, etc.

  So, will a GTS450 jive with my system, and if so, is there a particular card or an integrator that I should look for that? I'll take something with 1 GB of RAM, without worrying.

  Thanks in advance, you tech heads

  Colin.

  The GTS 450 is fully capable of MPE and your argument that the PSU can pull it off he made a mistake on this old system. Go ahead.

  The brand is irrelevant, only price/warranty.

• 23 - R115a HP all-in-one: looking for RAM upgrade HP 23-r115a video

  Hello

  I'm trying to find a video guide for disassembly of the HP 23-R115a, for the purpose of upgrading RAM.

  I tried HERE, but does not have the info I'm looking for.

  I couldn't have managed to find what whether on YouTube or the other. Your help would be appreciated.

  TIA.

  Hello @AeroGEL,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem, find a guide to upgrading the memory Modules and tried to help you!

  You can try to see the following guide: maintenance and Upgrade Guide (Page 15).

  In addition, the video here can help: OPEN ME UP! HP Pavilion 23 disassembly

  (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• The HD on Thinkpad T430 upgrade, how can I find a compatible drive? Looking for 1 TB 7200 RPM

  Hi, I recently got a T430 renovated and well, I just love and want to invest in an upgrade to 1 TB hard drive 7200 RPM

  I read the specs here but other than:

  • High, 320 GB, 7200 RPM, SATA 3.0 GB/s 7mm
  • 500 GB, 7200 RPM, 7mm or 9.5 mm high SATA 3.0 GB/s
  • 1 TB, 5400 RPM, 9.5 mm high SATA 3.0 GB/s

  It is really not a lot to spend when buying a new hard drive. (totall rookie at this, so please be nice)

  Are all HDDs OTC market you today my machine? I have read discussions on the Bay in my entirely appropriate machine HDs 7 mm and 9.5 is a stretch and could adversely affect the connection to the motherboard. You can link me to a schematic page? I am looking for part numbers, which would help.

  Here are some HDs I consider, how do I know if they will fit ok? Comments are appreciated. I can watch videos on gootube how swap, this part is easy.

  Currently dual boot win 7 pro and ubuntu 14.04 and I've pretty much mukked to the top of the 320 hd with partitions before I knew any better. Nothing on the drive is special, I might as well do a clean install or restore backups. Which do you recommend?

  I would replace the hd in 9.5 mm slot?

  PS, none of the disks hybrid work in the T430?

  Thank you!

  Good day and welcome to the community.

  For reference, take a look at the FRU T430 parts list: https://download.lenovo.com/parts/ThinkPad/t430_t430i_fru_bom_20140722.pdf

  There is a section for each: 7 mm/2.5 "" SSD and 7 & 9.5mm/2.5 ' hard drives, which were offered with the machine. "

  Hope this helps your search a little.

  Kind regards.

• Looking for a 'how-to' guide reinstall Windows Vista after upgrading motherboard

  Original title: the motherbard and cpu upgrade

  I want to install (I hope) soon new motherboard and CPU and I was looking for how to guide to reinstall vista after upgrade of the motherboard. Is it possible to get to the office without big hazzle and start reinstalling from there.

  In fact, I want to reinstall vista because I think it's much easier to try to record all programs and other settings.

  I tried to use already search funtion and it did not the asnwer I was looking for.

  I have oem (at least it says in the box) version of vista 32 bit.

  If the motherboard is exactly the same or almost exactly the same there should be no problem.  Otherwise you will want to completely reinstall Vista or even your system will contain drivers for the hardware is no longer present or missing drivers for the new hardware on the motherboard.

  "illuknisaa" wrote in the new message: * e-mail address is removed from the privacy... *

  I know how to reinstall Vista (I did this couple times) but I don't know how Vista reacts when a new motherboard is installed. I just need to reactivate vista or even will I get to the office?

• I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy a

  I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy one any where can someone help.

  Original title: Windows 7 Upgrade

  At any time the updates are most of the time is no longer available. However a commercial version of 'Upgrade' (not an OEM) will also do what you want. Only downside is the cost $$$ that Windows 7 is in short supply.

  Amazon: http://www.amazon.com/Microsoft-Windows-7-Ultimate-Upgrade/dp/B002DHLV8S/ref=sr_1_5?ie=UTF8&qid=1390672154&sr=8-5&keywords=Windows+7+upgrade

  All you have to do is enter the product key.

  =============================================================

  Windows 7 Anytime Upgrade: Instructions

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• Looking for an updated link download lightroom upgrade 6

  I'm looking for the updated link to download lightroom 6 upgrade. Details of the order below

  Details order order number: 9915582559

  
  

  When I try to download the file .exe and .dmg via the provided download any purchase for my mac and windows machine I got the below error message

  
  

  Sorry, TOO_MANY_DAYS_PAST if you have any questions, please contact Digital River Customer Service at [email protected] .

  
  

  Here is the response form Digital River
  

  
  

  Dear Arun Monique perrussot,

  Unfortunately, we do not manage the service customer for Adobe Systems,

  Home of the Inc. Please contact them directly with your application through one of

  the following methods:

  Customer Service URL: http://www.Adobe.com/AP/support

  Customer Service phone: if necessary, the regional numbers will be

  appearing at the above address.

  We apologize for the inconvenience.

  Sincerely,

  Dionnie B.

  The customer service

  Digital River, Inc.

  Email ID: 30557603

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? T

  I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? Thank you!

  ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv

  You will need Acrobat to convert files > 100 MB.

  [subject moved to cloud Document PDF Services forum]