looking for windows 8 installation disc or ISO

Similar Questions

• Download on the Microsoft site for Windows 7 installation disc.

  As a first step please check the product key. I typed in the figure of 25 key product exactly as described on the Microsoft Certificate, attached to my office when I bought it new. The o/s was preinstalled by the manufacturer Fujitsu-Siemens.

  Microsoft will not check my product key stating "it is not supported or my version is wrong. It's ridiculous, my windows is already active and running for many years in Vista with a certified product ID. In addition I received regular updates of Microsoft windows.

  So, how can I fix this nonsense to complete the installation disc?

  Unless you have already tested the compatibility of your computer with Windows 7: -.

  Windows 7 Upgrade Advisor - download [This can run on Windows XP, so it must be able to run on Vista]

  Windows 8 Upgrade Wizard - download [This can run on Windows XP, so it must be able to run on Vista]

  In addition to running the Windows 7 Upgrade Advisor, you may want to run an equivalent for Windows 10.  Unfortunately, you will have to use a substitute because Windows 10 pre-staged at level [GWX] cannot run on XP so I guess it cannot work on Vista.  So, to launch the wizard to upgrade Windows 8 instead which doesn't work on Vista.  Windows 10 system requirements and Windows 8 system requirements are pretty much the same if the results will be useful.  The first versions of the system requirements of Windows 10 has also stated that the processor (CPU) must support SSE2, NX, EAP extensions, but I have never established if my CPU reaches this spec [I just know that it works fine] and I have absolutely no idea if this part of the obligation has become irrelevant or is simply omitted for brevity.

  It is worth to run the Upgrade Advisor, even if you have already decided to go and install the new OS.  At the very least they would warn you of the hardware components you need to pay attention to.  Later, you can get better drivers installing the OS gives you - where to find the hardware drivers.

  I realize that you do backups of all of your own files, files of installation of any applications that you downloaded and product keys for all your applications.

  I realize that you will also do an image of the system so that you can go back to square one if everything goes wrong.  You must also make sure that you have both made & tested the hot spare / boot disk required by your utility Imaging System.  Macrium Reflect is an imaging Center free I've seen many people recommend.

  If you have a factory restore utility then you might find that your computer manufacturer has also provided a way to backup who until USB so that you can run the procedure to boot from USB, although the attempt to upgrade preventing your computer from starting.

  I'm not trying to say he'll be all this trouble, just that it will be worth the effort to prepare for this eventuality.

• How more recent wake of Windows Update Agent for Windows 7 installation disc.

  Hello

  I create a custom for a client recovery disc.   I joined the drivers by using Dism.   I would like to know how to update Windows Update Agent to the latest version on the disc.   The 7 disc I have is Windows 7 SP1 and whenever I use the installation disc, Windows Update does not, not until I update the Update Agent.

  Does anyone have any suggestions on how I can do this?   Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I would like to know some information.

  1. You are connected to a domain network?

  If so, I suggest you to re-post your query on the TechNet Forums as we have experts working on this type of questions and you help the better.

  See the link.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Looking for Windows 7 iso Arabic

  Hi all

  I am looking for Windows 7 Home edition in Arabic

  I found here from digital river, but none of them are Arab ISO

  find any Arabic version to download? I have the key

  Thank you

  Unfortunately, you won't find one.

  You can borrow a localized copy and use your product key, if you know someone who has a copy.

• Windows 7 installation disc

  I was looking for a link to download the iso of windows 7 to create a Setup disk.

  I've failed so far.

  Inspiron 660

  The problem is that Microsoft has broken the Digital Distribution of Windows 7 and replaced it with the software recovery tool Microsoft does not work. There is no way to download a file to the Dell OEM of Windows 7 license .iso image.

  If you work the factory settings, you can create recovery media using Dell backup and restoration as demonstrated here:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Factory settings are not equivalent to a clean install, but when Windows 10 came out in late summer (which is a free update for users of Windows 7) a .iso should be provided for any new installation.

  

  Otherwise, as you are in the United States. If your system is under warranty you can get Dell installation media will:

  www.Dell.com/recoverymedia

  Unfortunately, most of the systems of Windows 7 will have expired warranty, and Dell are makes them difficult to obtain the installation simply media due to the policy of Microsoft.

• Is someone can you please tell me how I can get a windows XP installation disc?

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  Windows XP disks are no longer manufactured or sold. You * may * be able to find a place with an old stock for sale, but it is not very likely. Close your only choice is to purchase a used copy somwhere (but I would avoid eBay, where any software you buy is probably hacked).

• Where can I get a Windows Vista installation disc?

  My old Acer laptop crashed about a year & a half.  I bought a new laptop.  The other day I plugged it to see what would happen.  He came & the guest a insert the Windows Vista installation disc.  Where can I get this drive?  Windows Vista came pre-installed with the laptop, so I do not have a disk with him.  Acer does not know because the laptop is out of warranty.  They told me to take the laptop to a computer repair shop.  Well, I don't want to spend that much money to find out what was on the laptop when it crashed.  Any suggestions?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  As you never received a recovery disk when you bought your laptop Acer here is how to use the internal recovery Partition command which must be...

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. etc.

  And if you have problems with the help of the Partiiton of recovery and Acer supplies more recovery media for previous models preinstalled Vista, you may need to use this method:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Satellite A500 - 134 PSAM3E - looking for Windows 7 drivers

  Hello

  I recently bought a laptop Toshiba A500 - 134 (PSAM3E), I am looking for Windows 7 drivers.

  I searched the Gulf site but there drivers are not yet available. Kindly help me to find drivers for my laptop.

  P. S.
  I'm really angry about Toshiba, there they sell computers under the name of Windows 7, and on the other side there are no available Windows7 driver. I lost my faith of Toshiba...

  Concerning

  Hello

  I didn t find Windows 7 drivers for the satellite A500-134 (PSAM3E) at this time.
  But I noticed that Toshiba is being driver download.
  Drivers more appear on the page of European driver for Toshiba
  I think that it s just a matter of time when the drivers would seem

  Ciao

• If I buy a Windows 7 installation disc, can I install it on two separate computers if I have two (the original) product keys?

  Getting two new drives hard but do not want to lose the computers.

  If I buy a Windows 7 installation disc, can I install on new hard drives of two separate computers if I have two (the original) product keys?

  Getting two new drives hard but do not want to lose the computers.

  If I buy a Windows 7 installation disc, can I install on new hard drives of two separate computers if I have two (the original) product keys?

  If the product keys are the same edition, Yes, you can use the same installation media to install on two computers.

• How can I get the adobe Creative Cloud ENT 1.0 for Windows 10 Installer?

  How can I get the adobe Creative Cloud ENT 1.0 for Windows 10 installation program?, is - if compatible win 10 Pro?

  I don't understand if you're talking about the creative cloud Packer, which is used to create deployment packages or the creative Cloud Desktop Application that is used to install and update applications on office services and access.

  Creating cloud packer is available from the deployment Enterprise Dashboard, site Licensing tab or the creative teams of cloud portal.

  The creative Cloud Desktop Application can be downloaded to desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Both are compatible with Windows 10.

• How can I get a windows xp installation disc. Need to start over.

  Need to redo my computer from scratch.  You will need an installation for windows xp disc.  Any help?

  You have an OEM computer (such as HP, Dell, Compaq, Gateway, Toshiba, etc.)?  If so, most of these manufacturers have installed on the hard drive that will wipe the hard drive and restore it to the condition purchased as a recovery partition.  When you first start and the manufacturer of startup screen appears, look for a message telling you to press a key to retrieve.  Quickly, press this key when the message and follow the instructions to get your computer back.

  HTH,
  JW

• Windows Vista installation disc: Black screen with a cursor and then nothing happens

  A blue screen appears when I try to start Windows and I'm trying to fix the computer through my installation disc I have. But when I try to run my Vista disk installation happening by loading the files fine. It then shows a black screen with a mouse cursor that moves. After that, nothing happens even if I leave it for hours to sit. It is a real disk Installation of Microsoft for Vista.

  If a clean installation of a real Installation of Vista disc does not work, then you probably have some kind of hardware problem (and the blue screen, you got before makes this even more likely).  You can try to do some troubleshooting on your own hardware, but frankly you probably put "t have tools or spare parts to do very much.  Here are some instructions that may help:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  If this does not work, then I suggest that you take it to a repair shop of computer with a good reputation for the service where they can troubleshoot, diagnose, identify and possibly repair or replace the problem.  Before you import it in, I suggest that you protect your important data, as it is likely that they will wipe the hard drive clean in the process.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD.  This should hopefully give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, slave the drive to another computer and copy the data in this way.

  I'm sorry, we can not help more, but from your description there is no option of software if you do not have to do a clean install of an Installation of Vista genuine disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help! Boot Camp will not read my Windows 7 installation disc

  I need to repartition the hard drive on my Mac for Windows to give more space. I thought it would be simple but not.

  I am running OSX and using Boot Camp 4.0.1.  I made an image of my Windows side, saved the side Mac and was able to remove my original windows partition. Now, I'm trying to use create the new partition and install Windows 7 from the disc, I bought two or three years.  It does not create the partition because "the installation disc is not found." This drive worked perfectly the last time and was intact, sitting in its case, then there is no reason to be damaged. My player plays other discs.

  I missed a step somewhere? Do I need a new disk of Windows? I don't know how to replace my drive. I think that I bought on Amazon.  The ISO-image-on-a-USB option is not available. I'm stuck!

  If anyone has any ideas, I would appreciate it.  I bought my son a video game for his birthday which works only on Windows.  The thing is HUGE. It not was not in these games when I did the initial installation or I would have allocated a lot more space.  I had no idea!  He was eager to try this new game.

  Thank you

  Cathleen

  Did you delete the original Boot Camp partition through the Assistant Boot Camp in OS X?

  http://docs.info.Apple.com/article.html?path=Mac/10.5/en/15554.html

  Do that first, then re-create it in OS X and follow the instructions to reinstall Windows 7:

  http://www.Macworld.com/article/1165272/Bootcamp.html

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• instrucyions for windows custom installation 10 for firefox

  There was an email from Firefox who asked the upgrade of Windows 10 custom installation.

  I need to know what are the steps. I have not yet installed.

  Hello

  Once you have updated for Windows 10 and Firefox installed, you will find this article useful to set Firefox as default browser.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Satellite L500-1EJ - Looking for Windows XP driver sound

  Hi all

  I am newly joined here in the forum and I'm looking for a driver for my laptop model Satellite L500-1EJ I bought last year here in Doha.

  I'm really surprised that the model number is not available in Toshiba driver download website! ??

  Can someone help me please? I use Windows XP, service pack 2 now.

  Concerning

  Hi shihabuhashim,

  Why the model number is not available on the Web from Toshiba site? Where did you look?

  I checked the Web from Toshiba site and I can find:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite L Series > Satellite L500 > PSLS0E > Windows XP
  (Satellite L500-1EJ belongs to the PSLS0E series)

  Now download the audio driver you need, but it s recommended installation of Service Pack 3 before you begin with the installation of the driver, as it contains important updates.