Lookout 6.1 user not found (Vista)

Similar Questions

• the user of Windows 8 service does not have the opening of the session; user not found.

  I can't sing on my PC. The display of error messages: SERVICE does NOT have THE USER LOGIN; USER NOT FOUND.

  I only have one user on my PC and its administrator. I tried the system restore and I did not work.

  Hello

  Please try this patch and see if that helps:

  http://www.kapilarya.com/user-profile-service-failed-the-logon

  Hope this helps, good luck :)

• Metadata of data user not found! -read the problem of network with Netbeans

  Hi all,
  
  I have Oracle11gR2 and Fedora 13 operating system.
  I have to do the analysis (in the calculation of the shortest path) on a network with IFN.
  I'll use the APIs of LOD, but the network is not yet partitioned.
  Before partitioning, I want to see if Netbeans can read my network. When I run the code to do this:
  

  String url = "jdbc:oracle:thin:@IP_of_machine:1521:dbSID";
  
      try {
  
                  Class.forName("oracle.jdbc.OracleDriver").newInstance();
                  
                  Connection conn = DriverManager.getConnection(url,"italia","italia");
                  System.out.println("Connect to Database");
                  conn.setAutoCommit(false);
     
                  Network net = NetworkManager.readNetwork(conn, "ITALY_NET");
                  System.out.println("Network has been read");

  but the output is:
  
  run:
  Connect to the database
  
  oracle.spatial.network.NetworkDataException: oracle.spatial.network.NetworkDataException: user not found data metadata!
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:792)
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:552)
  at oracle.spatial.network.NetworkManager.readNetwork(NetworkManager.java:176)
  to calcolopercorso. Main.main (hand. Java:62)
  Caused by: oracle.spatial.network.NetworkDataException: user not found data metadata!
  to oracle.spatial.network.UserDataMetadataImpl. < init > (UserDataMetadataImpl.java:108)
  to oracle.spatial.network.NetworkMetadataImpl. < init > (NetworkMetadataImpl.java:585)
  at oracle.spatial.network.NetworkAdapterSDO.readNetworkMetadata(NetworkAdapterSDO.java:4148)
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:766)
  ... 3 more
  BUILD successful (total time: 1 second)
  
  It has successfully connected to the database, but I have error when it should read the network
  What am I wrong?
  Thank you much in advance.
  
  Published by: crystal13 on Sep 16, 2010 03:05
  
  Note that network has been properly validated:

  SQL> SELECT SDO_NET.VALIDATE_NETWORK('ITALY_NET') FROM DUAL;

  SDO_NET. VALIDATE_NETWORK ('ITALY_NET')
  --------------------------------------------------------------------------------
  TRUE

  It seems that you have probably set user_defined_data 'Y', but do not fill your data defined by the user to the user_sdo_network_user_data.

  Follow these steps:

  select network,user_defined_data from user_sdo_network_metadata where network = 'ITALY_NET';
  

  If user_defined_data is set to 'Y', you can set it to "n" then IFN will no definition of user data search in user_sdo_network_user_data.
  If you intend to use your network user data, you must set user_defined_data 'Y' and
  fill your user data information in user_sdo_network_user_data.

  desc user_sdo_network_user_data;
  

  You can get the user to more data information form the white paper in ndm_whitepaper_11gR2 under the Section of the data defined by the user.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  I guess you know you use the API in memory of 10g instead of the API of NDM LOD 11 g.

  Jack

• Error "operating system not found" Vista on HP Pavilion DV6700

  I get a recurring "Operating system not found" error on my HP laptop. To let you know - I have backed up all the files on the DVD machine.

  The problem started last week.  I tried to turn the machine on and got the error.  I did a scan of the hard disk BIOS and the hard drive passed all tests.  I then tried to insert the first of the 3 recovery DVD in the laptop, but they did not start.  Finally, I used the partion (by pressing F11 at startup) to access the system recovery program.  Then I did a system restore to roll back the last Windows Update.  Windows has started, but it took awhile.  I used the PC for a week or two (backup everything!) and of course, I got the error again.  I went through the same process above, but do not restore the last update of Windows, the system does not yet recognize operating system.  Use the system restore, then rolled back the most recent update window.  System startup, but it takes a long time to start.

  Any ideas on how to solve this problem?  Should I do a system restore and start from scratch?

  Hi Questionme,

  You're able to boot inSafe Mode?  If the system starts in Mode safe without delays, we can eliminate the default settings and drivers for devices such as the cause and you can use theclean boot in order to identify a driver or a possible confrontational program. In addition, runchkdsk /r from an elevated command prompt (also valid for Vista) to verify the integrity of your hard drive.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The ISE - user not found internal user authentication failed

  Salvation of the Forumers

  I try to make wireless 802. 1 x, where the identity store using the internal users.

  But I got this error message when I try to connect

  Authentication failed                                                                                 :

  22056 object was not found in the identity of the point of sale

  My authrorization rules is built like that

  identity groups = user identity group / "mygroup".

  condition = no setting

  Permissions = standard / PermitAccess

  Question 1

  Any troubleshooting step to do about it?

  Question 2

  For authorization rules, what is the condition put to use internal user as the identity store?

  Thank you

  Noel

  The error is due to an authentication failure and is not a problem with authorization

  You must watch your authentication (policy-> authentications) and see what storage of identity has been authenticated against

  Moreover can do authentications Live page (monitor-> authentications) and to record failure, click the icon under details. This will give you details of the request processing and you can see what rule was accompanied in the politics of identity (matching political identity rule) and "banks chosen identity.

• operating system not found vista Home premium

  system won't boot operating text not found on hp dv9715nr go to recovery backup open the window find program called restore7.exe with no editor afraid to use it don't know what it is

  Look here: looks like the system files are corrupt, try KB 927392 to repair startup problems, also, could be the failed hard drive (check the bios sees it) or cmos battery.

  Here is a link to KB 927392, http://support.microsoft.com/kb/927392

  See you soon

• Crystal eye web cam device not found vista 32

  Acer Aspire 4520 laptop

  Crystal Eye built in webcam
  Latest drivers and software downloaded and installed on the site of Acer for Vista 32 bit
  Uninstalled and reinstalled and Seth to run in compatibility mode Xp SP2, which is the only option available
  The webcam was working fine when XP was loaded. Format has been done and added a new installation of Vista Edition home premium
  Cam sex was not recognized, nor is he is listed as an unknown device
  The show here and with a large part of the old model Acers with crystal eye CAM modules is that device manager sees about the web cam. I tried to manually install the camera using the camera function scanner to add a new device
  By selecting the appropriate inf file and clicking ok, the box is left blank when the manufacturer of crystal eye option should be.
  There are two install files on the Acer site and I've tried both the same problem.
  External USB cameras work very well as it has been tested all first. There is no problem with the crystal eye web camera as I have already said that it worked fine with XP and no problems. So what are the options can you give me that I have not already tried short using an external webcam?

  Hello

  Method 1: I suggest you run the fixit from the link and if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: you can also try the steps from the link to fix the problem:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Method 3: you can also try the chipset driver update and check if it helps:

  http://support.Acer.com/us/en/product/default.aspx?tab=2&modelId=14

  Alternatively, you can contact Acer support for assistance:

  http://support.Acer.com/us/en/default.aspx

• Journal of the User Not found

  Hi all
  
  I'm not able to view the log of users if the loglevel is set to 2.
  
  I login as administrator and wanted to see the logs created for users A and b I was able to view the journal, if I run as Administrator reports but
  
  If I login as long as a user A and user B I'm not able to view the log, while the logging level is set to 2.
  
  I tried to increase the logging to the administrator level 2-3, but still no luck.
  
  I hope that I'm not missing something here. Please help me
  
  
  Thnks in advance
  
  Prash

  Hello.

  1. you use a boot block initialization or the normal external table?
  2. What is the data type of column LOGLEVEL in external table and plese post you block initialization code?

  The problem is that you must do TO_NUMBER (LOGLEVEL) in bulk, because if you do not, a DECIMAL number (for example, 5.0) populated by LOGLEVEL and this is not correct, but 5 (INTEGER) is correct, it's the way you need TO_NUMBER block initialization.

  Read my reply in similar position:
  Re: Dynamically setting LOGLEVEL to debug users. S ' Please help...

  Concerning
  Goran
  http://108obiee.blogspot.com

• How to fix error IM32FAX. DIL not found on Windows vista

  When I start the Pc this summons, error IM32FAX. DIL not found vista window how to fix this problem please

  Hi Monastir,

  You can check the following link and try the suggested steps and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/fax-mode-and-error-message-im32faxdil/d25327ba-5dd3-4c9d-ADF5-ae8358d784c7

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Since v25 when I try to log in my account of Merrill Lynch, I get not found user IDS. Works well iE and Chrome

  When I try to access my account, as I recover a message not found user ID. I have 1) deleted all cookies, cache, history etc... (2) run as Administrator 3) renamed cookies-sprite 4) restarted

  I am currently using Windows 7 Home Premium SP1, Firefox 26

  I was going to take a look at the form, but I was surprised to find that there are many pages of different connection: http://www.ml.com/index.asp?id=7695_14227_14228.

  When I enter a username of random test here: https://www.mymerrill.com/ml/home.aspx?site=mymerrill

  I get the expected error: "user not found. Click here to retrieve your user code. "The link here goes to ml.com instead of being on the same site.

  If I'm looking for the thisisatest username then I get the page to enter a password, which is also on ml.com. So there is an interaction between the areas here which may be covered by restrictions on third party cookies or external scripts.

• Vista not found DB.esx

  When the computer starts I get the error message: "not found Vista DB.esx. I click OK on that, then an another error message "one or more system DLL could not be loaded. ESApp.dll"things seem to work except for the screen saver. I had installed a game CD & then he took off as it seemed to occur after installing the game. Restore the system to an earlier time. But still no work standby screen & message on reboot.

  Another tech gave this same orientation... and it worked...

  I had also installed the free version Malwarebytes.Corporation @.

  mbam-setup... last exe ensures that took care of the front of the situation

  believe...

  Thank you!

• QuickLook 3 - error (not found user information)

  Hello!

  When I try to open QuickLook 3 on my laptop HP ProBook 4510 s, I get the following error:

  Error: No user information found. Cannot continue.
  

  Do you know why is that?

  Thx for your help

  This means that you have not configured HP QuickLook and captured user information.  However, the program is installed and activated.

  Open MSOutlook.  You should see two icons on the far right of your toolbar (to the right of "Privacy") for HP QuickLook.  They resemble (i) with the green arrows on them (the program name appears when you hover your cursor them).  I do not use Outlook Express and Vista Mail, but the icons should be here somewhere as well if you use these programs to your e-mail.

  Click on the one called "HP QuickLook préférences".

  Select a setting in the tab "Capture".  Select the "Folders" tab, and select the information you want to capture.  And to set your preferences for security on the last tab.

  Apply the settings, then click on 'OK '.   A prompt appears stating he had to enter the information in the folders that you have selected.  According to the amount of information, email etc. it may take a few minutes.

  Once you have entered the information close Outlook and turn off your computer.  When you press the QuickLook button you should not encounter the error message - because the program now "found" the information of the user.

  Good luck.

• c:/users/mark/App Data /Roaming vdmgi.dll is not found

  When I started the window open easily, but on the screen it just this error - on top of dialog - Run DLL...

  After next to the dialog box - c: / users/mark/App Data /Roaming /vdmgi.dll.after than threr was written, the specicied module is not found. then what should I do for that matter.
   
  Original title:
  from on the desk, on the screen, display under dialogue.

  Hello

  When you ask a question here, you should always tell us to what is your operating system.

  For "vdmgi.dll" Google comes up with a lot of gibberish in the search results, which suggests it's a boot remains against malware entry that your AV has partially withdrawn.

  These steps are basically the same for XP, Vista and Windows 7

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• CoreFoundation.ddl was not found. Why is there no place on Microsoft sites that specifically tells a user how to correct this registry.

  Why a windows user has to pay a third party to correct this problem?  Responses to this problem should be easily and readily found so that people who have purchased products with Microsoft operating systems can easily solve the problems themselves.  Where is the answer I need on how to correct this error without having to pay someone.  It seems to me, you have already paid the system once, you shouldn't have to pay a second time to solve a problem with her.  It's very frustrating trying to find the help you need without turning around and around the company who wants to take your money to fix.  Microsoft needs to tell me how to solve this problem.   PLEASE, I BEG YOU.

  First of all, it was an honest typo, I was not looking for the wrong thing.  I have big problems getting Quick Time to work on my computer.  I have re - down loaded, download Itunes, downloaded the package combined download of two of them.  Nothing will work.  Here is a list of all the error messages I received in the last two days:

  Quick Time #0 error, please make sure that QuickTime is properly installed on this computer
  The plug is not properly initialzie
  I tunes of assistance was not installed correctly.  Please reinstall Itunes Helper.  Error 7
  Errors occurred during the installation of the updates.  If the problem persists, choose Tools, only download and try to install it manually.
  And finally...
  Application has failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.

  So, I register QuickTime, iTunes and Windows problems.  So where can I find a way to correct my mistake of registry which cost no money and has download their parties _ who pay you and it still does not work.

  I don't know if it will work, but it has helped other people who have problems with installation of these products.  Save the download to your desktop.  Right click on the Setup icon, and then click Run as administrator.  I know that you are probably already connected as long as administrator but believe it is sometimes the case for some reason that I don't understand.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  There may be a problem with another Apple program interfere with installation of itunes (specifically the itunes help). http://discussions.apple.com/thread.jspa?threadID=2256415.  Here's the gist of it:

  Uninstall the Application Support from Apple, iTunes and Quicktimes (if these, two are displayed as installed).

  (From this moment until reinstall us Application Support, Apple, QuickTime nor Safari 4.0.4 will able to run.)

  Then, we'll remove all the leftover program files and folders.

  (1) open the "disk" Local (c) or according to drive it your program files are stored on.
  (2) open the "Program files".
  (3) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (4) return to 'disc' Local (c) or according to drive it your program files are stored on.
  (5) open the folder "Program Files (x 86)".
  (6) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (7) staying in "Program Files (x 86)", open the "Common files" folder.
  (8) open the folder "Apple."
  (9) with the right button on the Apple's Application Support folder (if it still exists), then select 'delete '.

  Now, empty your Recycle Bin and reboot the PC.

  Reinstall Phase

  After restarting the PC, do not open other applications. Disconnect from your network or the internet. Turn off all your security (firewall, antivirus and anti-spyware) software.

  Now start the installation in a right-click on the iTunesSetup.exe file and you downloaded earlier and then clicking Run as administrator.

  Re-enable all security software before you reconnect to your network or the internet.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the iTunes is not install properly and to do please ensure that QuickTime is installed correctly on this computer errors, try to repair your .NET Framework 3.5 SP! application by going to start / Control Panel / programs and features / .NET Framework 3.5 SP! Click on the program and click on repair or uninstall.  When you are prompted, click Repair and let it run.  You won't have to restart.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The FPR application failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.  Make sure you have all updetes installed Windows - and I mean all of them (except for device drivers).  Do a manual check and install whatever it is, it comes with and then do another manual check and do the same thing and this follow up until no new update is presented and confirms that you are using the SP2 for Vista (Start / computer / system properties and it should say SP2).  Otherwise, manually install SP2 and rerun through the exercise of updates (or check it out before you start making updates).

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the plug-in has not initialized properly, make sure that you use version 7.4.1.14 QuickTimes or most recent - there is a known issue with older versions of work with Vista, but they claim to have the answers with this version.  If you've tried for awhile, you will have an older version.  I download and save on the latest desktop and make sure it is as stated above.  I also re - download and save on the desktop iTunes very it in case theres a similar problem there.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  To install updates, choose Tools, only download and try to install it manually (it's what they recommend as the fix for the problem of updates, so we should take the word for it).

  Once you've done all the preparatory steps before the downloads, repair. NEt Framework 3.5, uninstall programs, you must uninstall (if you can, or as much as you can according to the instructions) and then reboot the machine to make sure that you leave cool.  After the downloads, but before the installation, turn off all your security software and antivirus software in the case where there is a conflict of something.  Make sure that no other programs are open.  Then follow the steps in the update, then the measures re - install.  Then restart.

  I hope that the two products work now.  I don't think we need to do something for your registry database - weather (it's all these other programs that are the problem).

  If this does not help, then please repost this question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads as well as a link to this topic (so they'll know what's already been tried).  They are the real experts on audio problems and will be more than happy to help you - or you can try the Quicktimes/iTunes Forum where they know the products better.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.