Lookout4 of Conversion sources of Lookout4.5?

Similar Questions

• MISP 2.1: SYS. SOURCE$. Conversion of blocking SOURCES

  Hello

  I currently have a few thousand lines blocking the conversion of Unicode, the column of SYS. SOURCE$. SOURCE.

  They all State need (planned) conversion, no representation not valid etc.

  However, it is indicated in the documentation and help, the EDR should be able to handle this?

  BR,

  Kim

  I think I found the problem.

  It was two types, which contained comments convertible characters in their DDL.

  I had to delete the tables of AQ queue that they used in order to remove these types.

  Then I was able to proceed with the conversion - all green check marks now.

  Note: This is just a test run, in order to get a grip of the tasks ahead.

  BR,

  Kim

• P2V conversion where the Source is on the remote network?

  Hi all

  I am new to this forum and a little new for VSphere 4.

  My company offers off-site data protection and storage services, and has recently begun branching out in recovery of virtual network. In a Word, virtualize us network services essential to the customer on our ESX 4.0 host servers and make them available for access secure site-level disaster. Until recently we have used a re-usable restore starting from active state backups online system on servers as our means of conversion model VM P2V. It worked pretty well with one notable exception - a Windows SBS 2003 server.

  As a work around the BMR virtual conversion, we would like to perform a 'traditional' system P2V conversion. The challenge? The source system is physically located miles on the customer's network.

  So far, we have installed the VMWare Converter Stand alone on the source system (stand alone seems to be something wrong to get the VMWare Infrastructure compatible conversion, you must communicate with the destination ESX Server) and open the necessary ports on our firewall to allow communications with our ESX Server. Everything seems to work properly; However, the destination for the new VMDK cannot be the ESX Server. Since we need all volumes on that server to be cloned, the resulting 200 GB of a value of data transferred over the network will make this process impractical.

  How can convert us this system to a virtual machine that is:

  1. written on a removable unit attached locally for transportation later and later import to our host server VSphere ESX 4.

  2. compatible with VSphere ESX 4.0.1

  Hope for an answer or a 'trick '.

  Some of the VMware machines are available as files of the FVO. If you go into the file menu of the vSphere client you will see "Deploy OVF model". Who can be a URL. I'll see if I can find a deployable unit of the FVO and post the link.

• Export Source 24 Bit WAV as float 32 bits before the conversion in Adobe Media Encoder?

  Hello

  I am exporting movies from After Effects as .avi and I was wondering what I need to do to preserve my audio is close to the source as possible. My audio file of the source is 24 - bit / 48K. I use Adobe Media Encoder to encode audio/video like YouTube Widescreen HD but since After Effects doesn't offer 24-bit export, should I export as a 32-bit float? And is that going to change my audio somehow before moving to Adobe Media Encoder?

  I've read about it on some different forums, but am still not not clear about this...

  Thank you

  Henry

  Sorry, but you've made a fundamental mistake - a non-standard rate.  That's a no-no.  A big.  You will have to use a standard frame rate and come up with another way to get things to work.  You'll foolin' with frame rates.

• P2V conversion for a remote source of Debian Linux

  I tried to convert (P2V) my server physical linux (debian), but I can't.

  I use a stand-alone server of vConverter4.

  The conversion always stop on "connection to the server for assistance on the VM converter target."

  I can access the virtual machine to help but I don't know what to do.

  Help me please!

  Then, you should try to make your help-VM to pings. Starting conversion, change the setting of VM for assistance, check the virtual network card adapter/device is "connected". If it is already connected, disconnect and then reconnect the back and now try to ping your IP VM Wizard.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Mp3 conversion

  The title says it all. How to export my purchase of .m4a to mp3 without having to deal with double songs (files)? The only solution I found is to delete the album converted from my iTunes library and add the backrest of the iTunes media folder only. I wouldn't mind having my music on mp3, if it was not not to be able to listen to it on my home theater.

  Thank you

  Chatigne,

  When iTunes performs the conversion, he creates music files in the new format and keep the original in place.  If you wish, you can then delete the original.  It is better to delete it in iTunes via the highlight, then shift + del and not to touch the files directly.

  In addition, if you prefer MP3s, you must inspect purchases of online sources that sell directly to MP3 format, like Amazon or others who may be available where you live.  Just buy the MP3s and add them to your iTunes library, with no conversion necessary.

• How can I remove an email from a conversation thread?

  Employees often use ' answer to "a pre-arrival message when you start a new topic. This is to locate the new difficult message later, because in appears under an unrelated conversation thread. Is it possible to delete a message to an existing thread, so that it becomes the first message in a new conversation?

  I have played around with it for awhile now and have received confusing results. Sometimes, delete the contents of the references header does remove a message from a thread, sometimes not. In other cases, change all the references by adding for example a figure at the beginning of the string works, other times it doesn't. By changing the full source, you can modify additional headers, but so far I have not found a consistent method.

  There is more information on the threads here:

  http://KB.mozillazine.org/Stop_threading_by_subject

• Forefox convert a web address to a link, I don't like I want to write without conversion

  I'm writing/conversion of pages for the mobile (smartphones). I wrote a list of links. The text for each of the elements of the link is the web address, but I want to connect the linkfunction to a button (the best way for phones).

  When I write www.xzy.dk as text not as a linkaddress, Firefox convert to linkaddres and follows my ccs style for links and not the style for the text.

  As fare I see ist a problem in Firefox 19 yesterday I installed automatically on 18 19

  Leif Johansen
  Denmark

  Works fine here as can be expected from the source code.

  <body>
  <a href="http://www.objektiv.dk"><img src="../billeder/knap2.jpg" alt="" width="40" height="40" border="0"></a><font size="+2">" rel="nofollow">www.objektiv.dk/start/index.html</font><br>
  </body>

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How do I batch convert Quicktime mov to avoid (conversion)?

  I understand that sometimes in 2013 10 Quicktime for Mac has begun to force the conversion of .mov who were in a format inherited to a new format.  The way that is currently done in when I open a file with quicktime, it takes a significant amount of time to convert it, and then I have an option to save him.  Nothing new here, and I have read other forums on why this happens.  I would like to batch convert all my old .mov simultaneously and will save the files to a new format for a new folder.  How can I do that quickly, easily, and cheaply?  I tried to import them into the new iMovie thinking it would automatically give them but they do not.  I want to avoid opening several thousand .mov individually in quicktime and save them.  I have OS X Mavericks 10.9.5 and a 13-inch Macbook Pro 2012.  Thank you.

  I would like to batch convert all my old .mov simultaneously and will save the files to a new format for a new folder.  How can I do that quickly, easily, and cheaply?

  Under the Mavericks, Yosemite and El Capitan, the structure of "Convert" used by the QT application X Player are accessible by the user at the Finder level. This means that any file or files selected in the Finder window can be converted separately or in a set a certain target parameter using the option "Encode the selected video files" found in file 'Context' menu. In fact, this menu allows the conversion of target user for the quality of ("compatibility") standard h.264/AAC, h.264/AAC 'Higher quality' or Apple ProRes 422/LPCM, modification of quality files at 480 p, 720 p or 1080 p resolutions. If the source files are not supported by the codec of your current system configuration, but are supported by the FFmpegX codec package (e.g., codecs that are supported MPlayerX, NicePlayer, Perian, VLC, etc), then I personally recommend the usefulness of free Handbrake with his novices presets and manual advanced functions as a batch converter to third party targeted QT OS/IOS/tvOS MP4/M4V files. However, most of the existing files can continue to be played in VLC, MPlayerX, NicePlayer, or the Player 7 QT with Perian installed if you prefer not to perform a conversion.

  

• Conversion of QuickTime is eating hard drive space?

  So I thought I'd go through some old video files on an external drive, so when I found and tried to open them by default - open with Quicktime Player because they were .mov files. But when opening them that forced me to convert first, which took some time, but it was very good. After viewing the file, I have it closed and he could be invited to record the conversion, but I said no every time.

  Dozens of video clips later, I received a warning that my hard drive is running out of space even though I was not downloading anything. Of course, I'm up to 1 GB, even if I don't know I got a lot more than this, perhaps 20, but at least 10gbs before starting. I don't know Quicktime is somehow to blame, and whenever I try to open a .mov file and it begins to convert, I actually see my free disk space down a bit like 1.35 GB GB 1.06 to 53KO to zero bytes. However, now it crashes towards the end by saying: he can't open the clip, even if the conversion is almost over, and then my disk space back to about 1.35 GB. However, on my most recent test it is simply suspended zero byte. I quit the program and am currently stuck at zero-byte and get the impossible to open again message clip.

  I was able to open the same .mov files in VLC without problem. I tried to use OmniDiskSweeper to find where these ghosts files could be but nothing extraordinary appears. I can't find all the physical files that QuickTime can be created on my hard drive, unless I'm looking in the wrong places...

  I'm currently under OSX Yosemite v10.10.5 and Quicktime v10.4.

  If someone could help me please understand this point, I would be very happy. Thanks for reading this.

  If someone could help me please understand this point, I would be very happy.

  To start, I remember not where temporary files of conversion are stored by the system or if this location varies for different operating systems from the user. Basically, the problem is self-inflicted. When you refuse to save the file after the conversion, the reference of the source file ends up stored in your list of 'Récent' without for as much free disk space used to store the converted data. Try to access the data already converted via the "open the recent item" option will restart just another conversion of the same file. On the other hand, you had actually stored the converted file, you may have deleted or moved to an external drive for future use. Fortunately, if your system works like mine, there may be another way to reclaim the space for temporary storage consumed by conversions without having to know where temporary data is stored. Simply try to empty your "Récent" list by pressing the option "delete". Then watch the space window of Finder reading for a short period, while to see if the OS is recover storage space that has been allocated to the converted data. It worked for me under El Capitan, when I reset my normal 'None' setting return to the default value of '10' and ran some tests to try to reproduce your problem.

  

• Save the distribution source for the previous version

  Hello

  I am trying to use the tool run a Labview VI in VBAI. I use LV2013 SP1 and VBAI 2013. The step run a VI Labview gives me an error saying "this step supports LV2012 or earlier. When I record to LV12, this time an error comes up saying "the VI has not been compiled for the specified remote target or it is not registered with LV12." After I read the forums and help documents, I see that this problem can be solved with the recording of the VI for distribution (LLB).

  But when I open the project, it becomes LV2013 and LLB built as LV2013. So I go back to the first step, saying: "this step supports LV2012.."

  How can I build a source like LV12 distribution using LV13? I couldn't find a solution.

  You can either download a 2012 version (ask your local sales engineer because it's an older version), or

  "Save your VI as" for 2012 and post the zip files exported to the Commission on conversion. Can someone respond and wrap your files in 2012 VI + llb ^^

  - http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion

  -Eric

• 2651 a conversion of TSP Script for LabVIEW

  Hello

  I have a problem on the conversion of all TSP scripts that contain functions and appeal for the end loops. I'm new to the TSP with models of trigger scripts. I used the Script Builder (TSB) Test tool and am able to run any TSP and generate raw data, but I don't seem able to convert most of the codes in the command of LabVIEW VISA or loader LV TSP TSP and run it to generate data... I can't find any tutorial or examples how to do it.

  Let's say that... Use the example of KE2651A_Fast_ADC_Usage.tsp (pulse) and I'll just focus on the portion of function CapturePulseV (pulseWidth, pulseLimit, pulseLevel, numPulses). I have seen a few examples of LV that says loadscript myscript and close on endscript.  I did a lot of different approaches, and I kept getting errors in particular the print function that I am not able to generate data through LV by to read the data in the buffer to inside the instrument. Some approaches, I have had no errors but no data... Some approaches, I got error-285.

  The part of the code TSP pulse that works in TSB is here (I'm not including loadscript and endscript) and what is the RIGHT way to modify the code for LabVIEW and run it and obtain data? Thank you:

  function CapturePulseV(pulseLevel, pulseWidth, pulseLimit, numPulses)
      if (numPulses == nil) then numPulses = 1 end
  
      -- Configure the SMU
      reset()
      smua.reset()
      smua.source.func            = smua.OUTPUT_DCVOLTS
      smua.sense                  = smua.SENSE_REMOTE
      smua.source.rangev          = pulseLevel
      smua.source.levelv          = 0     -- The bias level
      smua.source.limiti          = 5     -- The DC Limit
      smua.measure.autozero       = smua.AUTOZERO_ONCE
  
      -- Use a measure range that is as large as the biggest
      -- possible pulse
      smua.measure.rangei         = pulseLimit
      smua.measure.rangev         = pulseLevel
  
      -- Select the fast ADC for measurements
      smua.measure.adc            = smua.ADC_FAST
  
      -- Set the time between measurements.  1us is the smallest
      smua.measure.interval       = 1e-6
  
      -- Set the measure count to be 1.25 times the width of the pulse
      -- to ensure we capture the entire pulse plus falling edge.
      smua.measure.count          =
                      (pulseWidth / smua.measure.interval) * 1.25
  
      -- Prepare the reading buffers
      smua.nvbuffer1.clear()
      smua.nvbuffer1.collecttimestamps    = 1
      smua.nvbuffer1.collectsourcevalues  = 0
      smua.nvbuffer2.clear()
      smua.nvbuffer2.collecttimestamps    = 1
      smua.nvbuffer2.collectsourcevalues  = 0
      -- Can't use source values with async measurements
  
      -- Configure the Pulsed Sweep setup
      -----------------------------------
      -- Timer 1 controls the pulse period
      trigger.timer[1].count          = numPulses - 1
      -- -- 1% Duty Cycle
      trigger.timer[1].delay          = pulseWidth / 0.01
      trigger.timer[1].passthrough    = true
      trigger.timer[1].stimulus       = smua.trigger.ARMED_EVENT_ID
  
      -- Timer 2 controls the pulse width
      trigger.timer[2].count          = 1
      trigger.timer[2].delay          = pulseWidth - 3e-6
      trigger.timer[2].passthrough    = false
      trigger.timer[2].stimulus       =
                  smua.trigger.SOURCE_COMPLETE_EVENT_ID
  
      -- Configure SMU Trigger Model for Sweep/Pulse Output
      -----------------------------------------------------
      -- Pulses will all be the same level so set start and stop to
      -- the same value and the number of points in the sweep to 2
      smua.trigger.source.linearv(pulseLevel, pulseLevel, 2)
      smua.trigger.source.limiti      = pulseLimit
      smua.trigger.measure.action     = smua.ASYNC
      -- We want to start the measurements before the source action takes
      -- place so we must configure the ADC to operate asynchronously of
      -- the rest of the SMU trigger model actions
  
      -- Measure I and V during the pulse
      smua.trigger.measure.iv(smua.nvbuffer1, smua.nvbuffer2)
  
      -- Return the output to the bias level at the end of the pulse/sweep
      smua.trigger.endpulse.action    = smua.SOURCE_IDLE
      smua.trigger.endsweep.action    = smua.SOURCE_IDLE
      smua.trigger.count              = numPulses
      smua.trigger.arm.stimulus       = 0
      smua.trigger.source.stimulus    = trigger.timer[1].EVENT_ID
      smua.trigger.measure.stimulus   = trigger.timer[1].EVENT_ID
      smua.trigger.endpulse.stimulus  = trigger.timer[2].EVENT_ID
      smua.trigger.source.action      = smua.ENABLE
  
      smua.source.output              = 1
      smua.trigger.initiate()
      waitcomplete()
      smua.source.output              = 0
  
      PrintPulseData()
  end
  
  function PrintPulseData()
      print("Timestamp\tVoltage\tCurrent")
      for i=1, smua.nvbuffer1.n do
          print(string.format("%g\t%g\t%g",
                              smua.nvbuffer1.timestamps[i],
                              smua.nvbuffer2[i],
                              smua.nvbuffer1[i]))
      end
  end
  

  I finally solved it myself! I first create support shell, according to the documents, but the problem was with functions of scripts but I solved by introducing VISA separate, feature writing and THEN retrieve the data from the instrument directly by VISA buffer read more. I did TSP_Function Script Loader that allows simply copy/paste codes teaspoon (any * .tsp) of: TSB program or incorporated into this type of function and loader.vi, name (parameters), defined by its own pasted script then it will generate RAW files directly in the array of strings that can be broken into pieces or restructured into what you want as for the graphics, etc..

  That's all I really need to do, I can do codes of tsp in LV and get the data off of it easily via the function defined. Now, this Loader.VI behaves in the same way that TSB keithley-made program I use.

  Here I add Loader.vi Script TSP_Function (in LV 2011 +).

• LabVIEW file conversion toolkit

  I have a lot of files in the version of Labview 5.1.

  I can't open it in my version of Labview 8.5.

  Source code in labview 5.1 should be changed after the current requirement.

  I so need a run conversion toolkit labview.

  Attach the file to download.

  I use the windows xp operating system.

  Please, help me at your earliest.

  Hi grugh,

  did you read what I wrote?

  There is a thread upconvert to such request...

• CVI2013: WARNING: implicit conversion changes signedness: "long" to "int".

  What is Clang was trying to say with this warning?

  int f( void )
  {
    int i1 = 4;
  
    int i2 = 1l << ( i1 - 1 );
    //       ^^  warning: implicit conversion changes signedness: 'long' to 'int' [-Wsign-conversion]
  
    return i2;
  }
  

  Hello CVI - User!

  The explanation is quite technical...

  The result type of the expression of SHIFT is "signed for a long time." The target type of the initialization is "signed int". Clang injects an implicit "signed long" conversion to "signed int" and check the different properties of the conversion.

  In particular, clang tests if the sign of the value can change during the conversion. For this test, clang calculates the range of 'values' of the source 1 L< (i1="" -="" 1)'="" and="" the="" "value="" range"="" of="" the="" target="" 'int="" i2'.="" the="" warning="" indicates="" that="" the="" signs="" of="" the="" source="" and="" target="" ranges="" do="" not="">

  The range of values of the source depends on the expression 1 L< (i1="" -="" 1)'="" and="" here="" clang="" is="" applying="" a="" special="">

      [excerpt from GetExprRange in the clang 2.9 source code]
  
      // Left shift gets black-listed based on a judgement call.
      // ...except that we want to treat '1 << (blah)' as logically
      // positive.  It's an important idiom.
  

  Therefore the range of values of source is: wide, 32-bit positive.

  The range of values of the target depends on the type of "i2" and that's the range of default values for "signed int": 32 - bit wide, positive or negative.

  In other words: 1 L< (i1="" -="" 1)'="" is="" considered="" positive="" (unsigned)="" and="" it="" is="" converted="" to="" a="" signed="">

  Note that this is really a special case and that you do not get the warning for other values:

    int i2 = 2l << ( i1 - 1 ); //no warning
  

  Unfortunately, I can not explain why clang didn't just compare the source and target types, it calculates the ranges of values and why 1< (blah)'="" is="" treated="" specially.="" i="" don't="">

  Peter

• Conversion of digital cluster problem

  Here's the situation:

  

  The wire from the source to the left corresponds to this description:

  

  It is a perfectly legitimate group of numeric values.

  Therefore, detailed help service "for whole Quad", the conversion should not damage the cable.

  However, it does.

  What gives?

  Tested in LV 2015 64 bit

  Note: Unplug the Typedef doesn't help, or no arrow Ctrl + Run.

  Answer: Unity, stupid!