Lose control value when tabbing in digital and smooth touch navigation

The attached VI illustrates this.

Run the VI, 'Digital' tab, change the value and press ENTER key.  The value you have written does not appear.

If you leave by clicking "stop"button, the value appears.

Everyone treats this without add iterations of the loop?  Tools > Options > environment > "End of text with the Enter key" does not help.

Thank you
Jason

Advertisement

Well, I found a work around.  Do main orientation for the Stop button before reading the value of the control.  See attached example.

-Jason

Tags: NI Software

Similar Questions

  • Display hex values when editing a digital control

    Hexadecimal display is deleted when editing a digital control (in the settings) in cvi 2012. Is this a bug or am I missing something?

    I have informed our R & D Department of the format settings in 2012 of the CVI. I have filed a request for Corrective Action (CAR # 379345) on this issue, but cannot guarantee that when this problem will be solved. You can check if this problem has been resolved in future versions of the CVI by searching the CAR identification number listed previously in the correction of a CVI Bug information.

  • does anyone know how to add a scroll bar on a form for calculations that change the numerical value when you scroll left and right?

    Screen Shot 2015-06-02 at 09.42.43.pngAnyone know how to create scrollbars that way in the forms in Adobe Acrobat format?

    There is no such control in PDF Forms. You will need to develop yourself

    If you wish to have. I suggest just using a text field with keys + /

    instead. It will save you a lot of headaches...

    Tuesday, June 2, 2015 at 10:56, rorys9206745 [email protected]>

  • When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

    when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

    I had the Charter to come out, they ran the new line and I always have problem help me please

    Hello

    ·         What operating system do you use?

    Step 1:

    I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

    Step 2:

    Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

    To assign a static IP address for your laptop:

    one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

    (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

    (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

    (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

    (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

    (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

    (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

    (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

    To assign a static IP for Xbox:

    (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

    (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

    (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

    (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

    (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

  • Update and change the values when VI is running

    Hello everyone! I have a digital control slider and I want to be able to change and update the value when Vi is running. Can I use the property for this node?

    If it is a CONTROL (no), then it is for the user to set the value via mouse / keyboard.

    You can still set the value via the NŒUD of PROPERTY or the LOCAL VARIABLE for ALL controls.

    What difficulty do you observe?

  • Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

    Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

    Hello

    The following steps may help:

  • I don't want to move to the new tab immediately when I select text and search it from the context menu.

    When I select text and right-click on it and looking for it, the new tab open and switched to immediately. I don't want that. Instead, I want to stay on the page that I am and don't want new tab to switch immediately.

    Hi Obaid.Farooq, please try the following:
    enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.search.context.loadInBackground. Double-click it and change its value to true.

  • can you do when you open Favorites and mak new tabs that the wontnt window close dropdown after each new bookmark bookmark and stay open till fact

    I was wondering if there is a way to have the bookmark drop down window stay open until you open all your bookmarks instead of having close and have to re open every time?

    Save all the bookmarks that you want to open both in a single folder. Later, go to the folder of bookmarks and click on "open all in tabs". You can also go to the folder of bookmarks "Recently bookmarked" and click "all open tabs" here also. Personally, I went into Edition-> Preferences-> general, and the value "When Firefox starts" to "show my windows and tabs from Last Time '. That way Firefox always restores my previous session and I need to retrieve web pages from my favorites.

  • two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

    two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

    When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

    OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

    Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

    Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

    Please post back with your results, thank you!

  • How to get the parameter values of a step type custom when I create file and adding a type of step seq

    I use lv 8.5 and teststand 4.0.

    I did a step type custom and recorded at the MyTypes.ini in pallets of type.

    I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

    T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

    But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

    Using joint file, how to get the setting custom step type values I put in *.ini?

    Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

    Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

    I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

    Everyone knows Q2?

    Thank you.

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Adding a few values for tab and use them in page

    I have an apex page that I want to use the same page for different tabs except that the query condition changes.

    Lets say, I have 3 tabs - Finance, sales, Marketing.

    I have a page which requests for the list of employees in a specific area (finance, sales, Marketing).

    I will eventually have 3 different types of queries, as below. The only change between them is the area.

    SELECT name, salary from employee where area = 'funding '.

    SELECT name, salary from employee where area = "sales";

    SELECT name, salary from employees where area = 'Marketing ';

    Is it possible to make my query in the following way to ensure that I get the TAB_ID of the value of the tab that I store.

    SELECT name, salary from employees where area is TAB_ID;

    What is the way to store one or more values of the TAB and use them in queries for a page.

    Your help is appreciated.

    Thank you

    user756931 wrote:

    Please update your forum profile with a real handle instead of 'user756931 '.

    I have an apex page that I want to use the same page for different tabs except that the query condition changes.

    Lets say, I have 3 tabs - Finance, sales, Marketing.

    I have a page which requests for the list of employees in a specific area (finance, sales, Marketing).

    I will eventually have 3 different types of queries, as below. The only change between them is the area.

    SELECT name, salary from employee where area = 'funding '.

    SELECT name, salary from employee where area = "sales";

    SELECT name, salary from employees where area = 'Marketing ';

    Is it possible to make my query in the following way to ensure that I get the TAB_ID of the value of the tab that I store.

    SELECT name, salary from employees where area is TAB_ID;

    What is the way to store one or more values of the TAB and use them in queries for a page.

    Assuming that by "tabs" you mean standard tabs and that the page contains a report of the region, so there is no way to do out of the box. Try to apply it using the standard tabs would hit two major obstacles:

    • He has no way of passing item values using tabs.
    • As all 3 tabs linking to the same page, they would be displayed under the current name of the page, which are strange and confusing.

    While it would be possible to work around this using the value ASK emanate a branch of each tab, and JavaScript, which would take you away from standard tab behavior, which is pretty weird, as is.

    Another possibility is to use the list rather than the standard tabs tabbed browsing, but which raise problems in integrating into the layout and navigation of the application structure.

    Therefore, I would propose two alternative approaches:

    1. by far the easiest way to implement this should forget the tabs and use a group of radio buttons or select list page to allow users to select the area, to include this item in the property Page to send Items of the region report and add dynamic action to refresh the report when the selection is changed. The report query would be:

    select
        e.name
      , e.salary
    from
        employees e
    where
        e.area = :p1_area
    

    In addition to being simple to understand and build, this has the advantage of being low maintenance and relatively future proof if the LOV which underlies the question of selection is dynamic and so automatically meets the future changes to the areas.

    2. If you are really determined to use tabs, then create 3 separate pages in finance, sales and Marketing with a tab for each, but locate the region report on an overall Page and display it conditionally on the necessary pages. The report query can then determine the desired area of the APEX_APPLICATION_TABS view by using the ID of the page to get the name of the associated tab:

    select
        e.name
      , e.salary
    from
        employees e
    where
        e.area = (select
                      aat.tab_label
                  from
                      apex_application_tabs aat
                  where
                      aat.application_id = :app_id
                  and aat.tab_page = :app_page_id)
    
  • Why when in a not tab home page and I click on the Home icon, FF will print what is in the current tab and will not go to the home page.

    Why when in a not tab home page and I click on House icon, FF goes for what is in the printing tab and when I cancel the preview before printing, FF does not go to home page back to Homepage no tab.

    Start Firefox in Safe Mode {web link}
    While you are in safe mode;

    Type of topic: preferences #advanced< enter > in the address bar.

    Under Advanced, select General.
    Find and stop using hardware acceleration.

    Search web sites secure. Are there problems?

  • Despite instructions from the help to get Firefox to show my windows and tabs from last time, when I close Firefox and reopen it, my windows and tabs are not there. What can I do?

    Whenever I close Firefox (when I'm leaving for a few days, or when the office closes from one day to the next day for some reason toher) and reopen it, the tabs that I got at the last session (usually calendar Google and Facebook) not open automatically. Google gmail tab is there - and I am sure that I always have to login.
    The indications 'Aid' Firefox says (1) close by clicking the Firefox button at the top of the window, then clicking on "exit". To open, click Firefox at the top, click on 'Options', select 'Général' and select ' show my windows and tabs from last time. " The option 'Show my windows etc.' was already there, but I clicked OK, then closed according to the instructions and open - Firefox to not see any tabs and windows but Google gmail.

    Previous Session Restore appears only on the homepage by default - Subject: House - not on the old Firefox Google start page - http://www.google.com/firefox or any other user defined homepage.

    There is also a menu item in the history of previous Session Restore, which does the same thing as on the subject: homepage.

  • I pressed (Control) (offset) when to bet and my characters of Gmail (the full screenshot) reduced to about 25 to 35%. How to restore? I already signed my Gmail account, restarted my computer (Windows XP has) nothing works.

    Question
    I pressed (Control) (offset) when to bet and my characters of Gmail (the full screenshot) reduced to about 25 to 35%. How to restore? I already signed my Gmail account, restarted my computer (Windows XP has) nothing works.

    'Ctrl + 0' (zero) to restore normal size

    See http://kb.mozillazine.org/Zoom_text_of_web_pages

Maybe you are looking for