Similar Questions

• Smartphones from blackBerry Torch 9800 completely erased during the update

  When I plugged my phone into the computer to charge, an update came on the bb Desktop Manager - to update to 6.0 Bundle 2467 - and I started the update.  After a few minutes, I realized that I have to back up my phone before the update but Office bb wouldn't let me - he said that HE had to be updated.  If the device software update paused until the Office update was complete.  When it was over, the update of the device continued... and I have no back upward.

  Somewhere in the middle of the update (after about half an hour) the phone blinked, there was funny "beep" and a message came that the update could not continue.  The phone has rebooted, but was stuck at about 65%.   I let it sit for a few minutes, still doesn't move do not.  Pulled the battery, let stand a few minutes like that and then reintegrated.  Began to restart, then won again at the same place.  Taken from the battery after a few more minutes and wait for about 15 minutes.

  When I put the battery back, the phone quickly started completely... but because the updater won Mid-implementation to date ALL is lost! Contacts, calendar, memos.

  Is it possible to recover whatever it is? Or all my data lost somewhere in cyberspace is?

  * There is a small file, about 5 MB called Contacts Blackberry so I thought I could synchronize the files from there, but I don't know how!

  Can anyone help?  Really aggravated in this topic...

  Hello and welcome to the community!

  First of all, we will be sure your BB works correctly and with the proper operating system. Is it? What you have said, I can't say for sure. If it does not work, then you can reload your new OS itself, just to be sure. Don't worry about all the data on your BB... he already went there now (based on what you said).

  For your data, Desktop software must have made a backup during the update process... sometimes, we offer the chance to overcome that... I hope that you do not have. In any case search your computer for files with the extension of the IPD or BBB (depending on the version of the Desktop software you use)... These are the files that would have been created on your computer when the update process performed the backup. Look at the time, the files were created... created around the time you were doing the update are candidates to perform a restore of your BB.

  Otherwise, if you had made use of yourself of the free app of the BB Protect your data are indeed "in the clouds" available for to restore you.

  In addition, if you use a Desktop Organizer (for example, Outlook), which must contain your data.

  In addition, if you have none of these, then you have indeed now met data loss, which is sad indeed.

  Good luck!

• iPad froze during the update and may not exceed

  Has obtained the new ipad and put in place.  Went do the last software update and it froze during the update process.  Blocked at the white screen with the apple logo.  Can not pass it and past 2 hours.  Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.

  Hey there smbirchler,

  Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.

  We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch

  Thanks for being a part of the communities of Apple Support!

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Re: Restoration of windows after abrupt during the update

  Hello world

  Last night I was updating my windows on my Toshiba laptop, however, my laptop suddenly shut down during the update process.
  Now, when I start my laptop, I am invited as a system error and I have to put my windows CD to continue. I've never had a CD of windows, and nor have I made a disc of recovery yet, so is it possible possible for me to connect to windows again? I use windows Vista.

  Any suggestions would be grateful.

  Thanks in advance

  You can enter advanced with F8 at startup startup options?
  You can get Vista in safe mode?
  Repair my computer option is available there?

  Try to use this option and you will enter the system recovery options. One of the options it is start repair or system restore.
  Try to fix the system or roll back the OS to an earlier time using System Restore.

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• Satellite A200-1TD - gel during the update of the BIOS

  I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

  I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

  Help, please

  Hello

  I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

  These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

  Moreover, on the Web from Toshiba site you can find an authorized service provider:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

  Welcome them

• An error occurred during the update error checking new Code 80072EFE

  An error occurred during the update error checking new Code 80072EFE

  error 80072EFE infected by a root

  Launch tdsskiller to find any rootkids, download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  your computer will restart automatelly and start up. Then run the updates.

• 1130us Envy4 crashed during the update of the BIOS

  Hello!

  I just killed my laptop Envy4-1130us favorite.

  I decided to update the BIOS of v.13 to v.25

  During the update process, mogen of BONE (Win8.1) upwards. No error has been shown. After restarting laptop for a few hours, and now it is not working. Supply duct is turned on, the system fan works at full load, but the screen is black, and system does not (OS not start and does not not the power button).

  Community can help me? An it's the BIOS of the laptop recovery console?

  PS: Excuse my English.

  Update:

  When the laptop was completely unloaded, I plugged in the AC adapter.

  It powers on and then the bios recovery procedure has been started.

  So now I have a BIOS v.10

  Thank you HP Bot now my desire to NEVER been updated bios

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.