Loss of connection on all the players of the OTP

Similar Questions

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• I get a message saying: it is strongly recommended to install this update, but when I click on it it say connection to update the Center, but he just goes and and never connects. All the ideas that please

  Whenever I log in I get a message telling me that it is important to install an update, but I seem to be unable to connect to the update server. A blue line goes through before and behind the screen and it says connection to update the server but, despite leaving her for hours it connects never actually

  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Satellite P750 - no WIFI connection in all the

  Have had a new Satellite P750 for 2 weeks. Some intermittent problems, wireless modem connection - now no link at all. Connects to the modem with "limited activity" - so no internet. It connects ok with the modem cable. Have rebooted, checked the driver updates. No idea what to do to solve this problem. My first Toshiba and I'm really not happy I lost my money!

  Any help?

  Hi Brettd,

  > now no link at all. Connects to the modem with "limited activity".
  This confusion of s. At the moment you have no connection or limited? Both is not possible ;)

  I recommend an update of the WLAN driver and you can download the latest driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

  Also, make sure that MAC address is not blocked in router and update the firmware on your router.

• Impact of the loss of connection to all host bus adapters

  I was just wondering more of your virtual machines, freezing, there is risk of hard and corruption OS if all iSCSI HBA connections are lost? Reason being, I need to convince anyone here that we should not have our two iSCSI HBAs, going to a single as a single point of failure switch.

  Essentially, it would have the same effect as having a reader "disappear" in the physical world. You might meet guest OS corruption, corruption of data, or other bad things, like virtual machines will be essentially have crashed.

  -Cody Bunch

  vExpert, VCP VI3

  http://professionalvmware.com

• Has tried to fix the wi - fi on El Capitan, but now no connection to all the

  I had problems connecting wi - fi typical (?) in El Capitan, especially during commissioning or wake from sleep. I tried to follow the steps described on http://osxdaily.com/2015/10/16/fix-wi-fi-problems-mac-os-x-el-capitan/ , but he has completely killed my wi - fi. I don't know how to fix or even go back to the way it was imperfect, but from time to time to work.

  • First of all, I highlight several aspects of the instructions on osxdaily which does not correspond to what I saw on the screen, especially since there is NO file called "com.apple.network.identification.plist" in the SystemConfiguration folder.
  • In addition, another site was already a different folder of com.apple.Bluetooth.plist out me and put it on the desk. Not sure if I should put it back.
  • Finally, the instructions on this site imply that we are not deleted what be it unde the DNS setting before adding something like 8.8.4.4 but I had something there already... a number starting with 196; He disappeared after that I removed the other SystemConfig files? I write to this DNS address, but I don't know the 'field of research"that was recorded on the right.

  I hope this information is useful. I need to get up and running right now, I am a teacher and school starts Thursday!

  I should add: wi - fi is recognized by he's other portable computers and iPad in the House; on my Mac Book, however, he does not even see most of the time!

• I've updated to Firefox 8, now, it will not keep Me connected to all the sites!

  Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in again, even if on some sites it's to remember my username and password (just do not keep me logged).

  I tried to delete all cookies and history and still nothing.

  Does anyone else have this problem?

  In the privacy section of the Firefox options, make sure that Firefox is configured to accept cookies and that it is not set to clear history of Firefox closing.

  (If you use the default "Remember history" then it should work fine. If you use the "customized for the history settings" setting, and then make sure that "Accept cookies" is checked and "clear history of Firefox closing is not checked.)

• My master password does not ask for connection and all the site view saved passwords.

  On one of my computers when I open firefox the master connection requires me to type my password has disappeared. But when I go to one of my sites that passwords are used as if I had. This means that anyone with access to this computer can access my secure sites. How can I fix it.

  Thank you

  Install the master password again. Then restart Firefox.
  Is always the problem?

  You can use the same password that you had.

• After changing some settings I connect everywhere all the time!

  Help! I followed the advice of the Mozilla Support and changed a few settings (Privacy) because I kept having trouble with Adobe Flash Player, which would not be executed.
  Now I have to log in EVERY time on my email and other accounts, even if I said ' remember me '.
  I want to change back, but don't know where and how!

  To be more precise, if you're using 'clear history of Firefox closing:

  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

• WRT160N will NOT maintain the connection. Wireless connects to all the...

  Comcast ISP

  I can connect directly to a cable modem and internet access. But when I try to use the Linksys WRT160N I get wired access, but not wireless.  Then, in 1 minute, I get NO connection.  I searched this topic (via several titles and not much info).  There seems to be a lot of us have problems with this router.  Any suggestions...?  Thanks for your time and your efforts...

  Greg

  I did not 'time' to connect directly to a cable modem.  After about 5-7minutes I became poor connections and the lights on the modem have been reset.  I bought a new modem and now my connections are stellar!  My wife asked me if I was doing something to improve our speed of connection...! :-)  Nope, probably cables/modems goes wrong!

• 5 ESXi VMware vSphere Client need to password reset cannot connect to all the

  Have a question about the use of vSphere VMware esxi 5 Client.The root user has been disabled while we could use another name for root. Is there a way to reset this password to users so that we can open a session.

  When reinstall there is the possibility of preserving VMFS store.

  You must make sure you choose which

• I get the error "all other players have left the game. How I solve this problem?

  When I play chess in msn games no connect, repeat "all other players have left the game.

  Hello
  I would say search/post this question here:
  http://zone.MSN.com/en/General/microsite/community
  B Eddie

• Router WRT54G3G-ST - no internet connection - cannot reset the router

  Hello.  Some longer story certainly not short (I apologize for the length of hiking...  I don't know what is and isn't important, will scan, please...  I'm sorry...) : recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Anti-virus and Firewall and a router Wireless-G Linksys WRT54G3G-ST with its AC adapter plugged into the wall power outlet and a network cable directly connected to my computer.) received a drive-by generic.DX!12536d125737 Trojan horse without me download whatever it is one of the few sites I visit every day.  My internet connection has crawled, and I have now no connection at all.

  I've been making McAfee good volunteers forums help quick and very helpful...  They recommended Malwarebytes Anti-Malware for me, I downloaded my own second computer (a laptop) on my flash drive, then on my infected computer.  I ran, tried adapting so recommended, and only then discovered the Trojan horse killed my broadband entirely.  I scanned with it anyway and he quickly found and deleted / quarantine 11 Adware.MyWebSearch related files, but nothing else.  Then, they gave me a link to a patch off updater file and tells me scan in SafeMode until nothing else has been found and check if it has fixed my lack of broadband access.  I did, Malwarebytes found nothing else, but unfortunately I still had no broadband.

  Then, they recommended WinsockXPFix.  Which I ran and he did all his OK registry changes, I restarted if necessary but still no broadband unfortunately.  WinsockXPFix using make things worse for me with the registry changes, did he?  I used the backup of the registry to save the registry before changed files before running.  Should I come back since I don't always have a broadband connection?  McAfee volunteers kindly then told me that I had to hard reset the router, but I tried many times with no fortune.  I'm at a loss as to what, if anything, do we hope to get my broadband, please...

  It is very confusing with many different variants for resetting routers, and what should I do to my router model (Variations: unplug this cable/adapter exactly where; pressed the reset button between 5 and 30 seconds, the computer restarts, or no, 1 or 2 minutes between different steps, waiting or not - and for all these exactly when in the restart procedure.).

  I have reset once before with the reset button, page of routers to http://192.168.1.1default admin password, then it changed to security, etc. but this time I can't make it work.  I'm happy as possible to try once again to get an appointment by perhaps, something please...  When I go to http://192.168.1.1 now, or to any other address, Internet Explorer gripes at me that I am offline, which is annoyingly correct.  I do not have and never had Zone Alarm, but disable my McAfee Firewall does not help.  IPCONFIG at the command prompt gives me an address of 169.254.X.X assigned Windows

  I was going to use the routers Wizard installation CD to try to reset the router, and if that didn't try to get its firmware version number to perhaps upgrade.  But I was going to ask here first of all for expert advice because I read a lot of things that can go wrong during the upgrade of the firmware.  However, analysis the CD (without launching the CD). McAfee found the virus W32/HLLP. Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why.
  I scanned my computer together several times and no infections have been reported.  I downloaded the file several times, both www.virustotal.com (39 online antivirus) and virusscan.jotti.org (20 online virus scanners) and every time each virus scanner didn't report any possible infection.  My updated virus scanner McAfee reported a false positive and still Jotti and VirusTotal 2 scanners from McAfee report the file as own probable?  Is "_desktop.ini" a file legitimate Linksys?  I have not found any information on Linksys forums about this.  My problems just keep multiplying... mentioning problems more...

  Find this suspicious file on the CD I decided to download instead the Linksys Setup Wizard
  (Router product page: http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download )
  File: http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
  my flash drive, then on my infected computer that is connected to the router.  I ran it (downloaded the version of the file: 4.2.0.007 - original version CD Setup Wizard: 4.0 print on CD front) and immediately gave it 1 of the 3 options: Mobile broad band only, high flow only WAN, or WAN high throughput and high speed Mobile.  I don't know what damage, if any, I caused by continuing.
  It seemed that he was trying to go in the entire router configuration process.  I thought it would take me to some options to reset the router, as I read in the user's Guide, and besides - it is my understanding.  The installation process stopped at only 30% done "router not found, make sure that the router is connected correctly and try again."  How many Overwrite original router configuration files I did continue?  I'm quite confused.  The wizard does not check if the router has previously been set up before setting up again?  Unlike version caused my router to not be detected by the Setup Wizard?  Is the horse of Troy generic.DX!12536d125737 who killed my trash to wide band my computer settings so badly that my router is undetectable/essentially not configured?

  Update of sorts: I tried one last time to reset the router, and I unplugged/plugged the network cable.  The fact that I had still no broadband on my Dell XPS main use computer that is connected to the Linksys router.  However, my laptop, with map data in the router, was for the first time able to find network - constant connection and speed is great, it's what she allways has been on the laptop (the Trojan/router problems, my laptop only for broadband with the data in the laptop card.).  Perhaps the cable network was simply not re-connected properly/entirely for 1 of the many attempts of resetting, indeed, it could also explain the downloading, installation wizard is not able to find the router/only get 30% done.

  Laptop prompt IPCONFIG/all with data card Sprint inserted into the slot of your laptop:
  IP = 174.158.XX.XXX (Sprint)
  Subnet mask = 255.255.255.255
  68.28.90.91 = DNS servers
  68.28.82.91

  Laptop prompt IPCONFIG/all with Sprint data card inserted in the router:
  192.168.1.1XX = IP address
  Subnet mask = 255.255.255.0
  Default gateway = 192.168.1.1
  = 192.168.1.1 DHCP server
  Servers DNS = 192.168.1.1

  Since my laptop started to work with the data card into the router, I have not tried again to reset the router and I tried the downloaded installation wizard.  I don't want to spoil anything about it any further as I have (?) / the Trojan has, and I need expert advice, please, about which of the 2 if not more, I do (first?).  On my laptop, typing http://192.168.1.1 in Internet Explorer Gets the ToolTip for the user name and password, but I did not.  I read that you should not reset the router or (?) Is it just 1 or two please?) upgrade the firmware unless the computer is connected directly to the router - that is not my laptop.  On my other computer that still has no broadband, Internet Explorer still says I am offline when you type http://192.168.1.1 in.  My IP address on it is still a 169.254.X.X assigned Windows and a command PING 192.168.1.1 prompt returns with 'Destination host unreachable.', as it has been always and even with all the other addresses (with the exception of 169.254.X.X).

  Boring 2nd "update" of all kinds, my apologies for the length, as always: I've been so focused on the horse of Trojan/broadband killing that cluelessly largely forgot I switched with AOL.  Try AOL dial-up does not work, madness thickens...  Software AOL tells me to check my connection, but all the phone cords are connected as should be.  I plugged a phone directly into the wall jack and I get the tone, I can call OK and the phone rings and receives calls OK.  State of the devices-Modems-Properties-Device Manager says that the modem is not working properly, and "resources" tab shows no conflicts.  Query Modem on the diagnosis tab seems OK to me, as does the journal, but I'm certainly not an expert like allways.  I change all the settings from anywhere.
  I noticed and that check IPCONFIG it says that my IP address is 192.168.1.100 it lasts maybe that someday (then goes back to 169.254.X.X), maybe more, I don't know - I don't check that often to define (should I?).  Meanwhile my broadband, or my works switched.  I can PING 192.168.1.100, but nothing else.  I am convinced the wrong killed Trojan horse my broadband and dial-up - I've never had a problem with my prior V.9x DFVc Modem 56 K Conexant D850.  In addition, I am not convinced the Trojan horse is not still lurk everywhere on my computer, I think that it's...

  Any help with the restoration of my high speed/dial-up is greatly appreciated, please...  Thank you!

  Hello.  There has been entirely too long since I answered, I'm sorry.  There is no excuse, and it is terribly rude to me...  You took the time to read and answer me, and I appreciate very much that in effect.  I apologize for being late, I'm sorry...

  After that I left my message, I downloaded several virus/spyware scanners, etc from my laptop on my USB key, then my other computer for some in-depth analysis necessary.  Was one I downloaded Network Magic that somehow, some way fixed both my high speed/dial-up internet on my main computer is connected to the router WRT54G3G-ST.  I don't know what/how he fixed my connection, but the connection high speed flow works brilliantly since...  Network Magic has worked for me, and I highly recommend it to all those who have stubborn lack of internet problems (caused by Trojans to this) that I did.  There is no guarantee this will work, but it did for me in my amazement.

  Network Magic, as is the Linksys is owned by the parent company Cisco.  Respectfully to all the knowledgeable experts here (which clearly I'm not), I don't want to venture out of the limits.  I'm trying to simply hope to be useful and save a few headaches for both you volunteers and users... buy a new router or the computer was in my mind, with all due respect, I recommend suggesting to try Network Magic users if the reset of the router/all other fails, please.  I used WinsockXPFix/WinsockFix utility before using Network Magic, I don't know if it matters.

  I also upgraded my package of McAfee, I installed on my old software rather than uninstall the first, which caused errors in all things virus scanner a critical need.  I install right now, but it caused some delay to refocus my time.  Some virus scans found many Trojan horses, some were same / in the same folders that killed my broadband - which stopped me in my tracks to ensure a clean uninfected.

  Certainly, it doesn't fully explain the long time, and I'm sorry, once again.  It's just that I'm being cautious and slow in all this.  To answer the first very good idea, you did: Unfortunately, there is no room on my other computer to connect the router in to, which even so caused frustration (at the time).  I forgot to include this in my post new length of countless things to see / do not forget...  It was a brilliant idea, however, I thank you...

  Thank you for your time and your help, I appreciate it sincerely...  Thank you...  I think and hope that this matter is resolved.  It seems to be, the router works perfectly as it always has, and I am positively happy as can be in this regard.  Thank you...  Peace...

• is my connection referenced under the remote name

  When a remote computer or the connection is called is he talking about my system? or someone is trying to connect to my system? Thank you

  Hi Sandi, and Jason

  I guess it depends on what perspective you're talking about.   The answer is that it can be both - depending on the circumstances.  It's usually refers to another computer if it happens on your computer.

  Here is a good article on remote connections (and all the other links in this article which provide additional information): http://mobileoffice.about.com/od/remoteaccesssolutions/g/remote-access.htm.

  Here is an article on the (also with many links to go also) Remote Desktop connections: http://windows.microsoft.com/en-US/windows-vista/Connect-to-another-computer-using-Remote-Desktop-Connection.

  Here is some information about the remote access software and guides: http://www.pcmech.com/article/remote-connection-guide/.

  I might be able to provide a clearer answer if explain you the situation in more detail.  Why are asking you this question?  Makes you think of a remote connection is involved with your computer (where are you seeing this and what does exactly)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or 32-bit XP Professional SP3 or other)?  You have a home network?  Is your home wireless network and you are using a wireless router?

  I hope this helps.

  Good luck!