loss of connection to usb printer

New vertical Time Capsule continues to lose the connection to the usb printer.  I have to restart the TC to make it work.  Never happened with the old version 2 TC.

New iMac El Capitan 5 k running.  Canon MG6320 printer.

Tags: Wireless

Similar Questions

  • How to connect a USB printer to Satellite A110?

    Hello

    I have a problem with the installation of a printer (hp m1120) on my satellite A110 because when I connect to the printer, usb does not find it. What should I do to install this printer?

    thx for the help

    Hello

    just a silly question from me: fact you power on the printer when connecting to the machine? If YES, then try all USB ports on your computer and the printer must be turned on for the connection to the machine.

    If the system would not find then check if your USB ports work, simply by pasting a USB or something else in it. If the computer does not recognize the USB key, then your USB port works correctly. The consequence would be to check if the printer works.

    Connect the printer to a different computer (may be a computer of a friend) and check if it would be recognized. The printer must be turned on! When connecting to a computer, any computer. If it works then reconnect it to your laptop and check if a new hardware was found.

    Please give some feedback if it worked...

    Welcome them

  • How can I connect a USB printer to Windows prompt automatically?

    What I have:

    HOST: OS X 10.9.3

    CLIENT: Windows 7 Pro x 64

    VMWare Fusion 6.0.4

    Goal: Have the USB printer works both host and guest operating system

    What I've done so far:

    As redirection via VMWare did not work (redirect almost never done) what I did install NIC for windows in bridged mode and assign a static IP address. I selected for the USB printer be connected to Windows. In Windows I shared the printer and then in OS X connected to it. Printer prints very well two operating systems as you wish.

    Problem:

    If I turned off the virtual Windows machine then power on and it back on the printer does not reconnect automatically. In the "devices and printers" window of Windows, it shows as grayed out. I have to manually click Vitural Machine, USB and Bluetooth, < printer > connection. Once I did, it immediately connects and works correctly. Really want to make connection happen automatically when the virtual machine is turned on, but so far have not found a way to do it.

    Thank you

    V

    Try Apple Hello Technique. It still works. Check that the USB printer is connected to your Mac and not the Virtual Machine.

    For more details, refer

    Share a printer with a machine virtual Windows using Apple Hello

  • Why Windows XP Pro creates another instance of the printer when I connect my USB printer,

    I am running Windows XP Pro SP3. I have a HP LaserJet 1100 printer (parallel) through a parallel to USB adapter. It seems that whenever I connect the printer to my laptop, another instance of the printer is created, so I have HP LaserJet 1100 (MS), HP LaserJet 1100 (MS) (1 copy), HP LaserJet 1100 (MS) (copy 2). Only one of these printers may also appear online at the same time. Sometimes I use the laptop in a dock and connect the printer to one of the 2 station USB ports, and sometimes I connect the printer to one of the 2 USB ports on the laptop.

    How can I consolidate all of these instances in a single printer so that I can have a consistent default printer? Or, how can I prevent this from happening at all?

    Bruce B, Massachusetts

    This happens because you have connected the printer to different USB ports.  The same thing happens when you connect any device (e.g., a mouse) on different USB ports, but unlike "Printers and faxes," Device Manager shows only the devices not present ("ghost") if deliberately do you.

    If having the extra icons printers and faxes you, right-click on it and select "Delete" - and then always connect your printer to the USB port.

  • I want to change connection of USB printer wireless

    HP support for this question/answer link is broken.

    HP Officejet 6000 wireless (609n); Windows 7 32 bit

    I want to change the wireless USB connection (and can't find the instructions on the support pages).

    Thank you.

    Hello

    It's his Manual:

    http://h10032.www1.HP.com/CTG/manual/c01758106.PDF

    Page #11 indicates that it can have built-in wireless: 802.11 wireless (some models only). Is - that your model has that? If Yes, go to the page #46 and follow the instructions to set up. If not, you can buy a print server USB wireless for your printer as one of them:

    https://www.Google.com.au/search?q=USB+wireless+print+server&hl=en&rlz=1G1GGLQ_ENAU282&PRMD=imvns&source=Univ&TBM=shop&TBO=u&SA=X&EI=QAYeULK7Gs6fiAfR4YDgDA&SQI=2&ved=0CH8QrQQ&BIW=1920&BiH=986

    Kind regards.

  • Problem connecting to a printer USB to Equium A60

    I tried to connect a USB printer, Photosmart C3180, to my laptop Toshiba Equium A60 model but when I load the software and follow the instructions it seems to load correctly, then at the end the following error message appears "specified Port unknown".

    I tried everything the printer manufacturing suggested and even downloaded the latest Toshiba BIOS updates, but this still does not work. The PC detects new hardware but won't install it.

    I tried with another USB printer and the same message appeared.
    Any ideas?

    Hello

    It seems that the printer port name specified does not exist on your computer.
    You must use the Print Manager to see the current list of ports, you can print and use one of these.

  • Connect USB printer to E4200

    Hello

    I think I discovered that you cannot currently connect a usb printer to the usb port on the e4200 to share it on the network.

    However I have heard that this could be facilitated reports may be activated in the spring.

    I've also heard of "virtual usb", but I don't know if this has anything to do with it.

    Anyone can shed some light on this?

    Receive word of USB print support will build on the next firmware update. Until then, we'll just have to wait.

  • EA3500 unable to connect USB printer

    I'm unable to connect to a printer using the USB port on my new Linksys EA3500 router.

    I followed the instructions here: Support Page , but my version of Cisco Connect not not the option "connect a USB printer»

    I'm on a macbook pro OSX 10.7.4 and my version of Cisco Connect is 1.4 (12005.2). Version of the firmware on my router is 1.0.30.126544. A screenshot of what I see after having clicked on "Add a device" in Cisco Connect is below. The printer is a HP DeskJet F4280.

    Please notify.

    Thank you.

    I began to question my purchase of this router, as it was rather costly unitl a mod contacted me and asked me to try to update my firmware again. This time, there was an update available installed tonight firmware Cisco Connect Cloud (version 1.1.38.138143) that I was able to connect my USB printer. I know that this sounds like a commercial of Cisco, but the Cloud Connect software and interface is amazing! It's a management tool complete recommended router on the web making it pretty useless old Cisco Connect.  Cisco thank you, I am happy that I now have a refreshed and awesome router! (which printed on my printer usb too)

  • Connect the new iPad Pro for USB printer

    Do I need a special cable or a Hub to connect these 2 elements.

    You cannot connect via USB to your iPad, it will not be recognized. Is the printer compatible wifi?

    If the printer supports AirPrint, you can use your wifi network to print on it: on AirPrint - Apple Support

    If it isn't, some printer manufacturers have their own applications in the App Store to print their via wifi, or there are third party printer applications in the App Store that could work with him.

    If the printer is not compatible wifi, you could (I have not tried) able to connect it to a computer and print to it via who (for example print via an app on the iPad that sends the print job to/through the computer)

  • Printer will not connect via USB

    HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

    Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

    The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

    Hi Rmhodgson,

    Run the following utility below.

    http://support.HP.com/us-en/document/c02073861

  • Tecra A8: Problem with the USB printer connected to the Port Replicator III

    Hi all

    I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

    I called the technical support of my country, but her is not recorded similar problems.

    A person with similar problem? Some help would be very appreciated.

    Thanks in advance.

    Hello

    Seems like a strange question... Already done the standard procedure in the event of such errors? :)

    The standard procedure is somehow similar to the following:

    -Update your BIOS
    -Update all the drivers for your machine
    -Update your printer drivers
    -Update your operating system

    If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

    Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

    I'd be happy to hear feedback from you on your situation...

    Welcome them

  • HP4240 printer scanner will not scan (says USB not connected) also cannot print attachments in emails

    1. an email has been sent with an attachment in PDF format, but I couldn't print it.

    2. I tried to scan a document and then join an email but the scan says USB not connected. The printer will print however

    Hello

    1. what operating system is installed on the computer?

    2. are you able to print or scan from other applications/program?

    Method 1: I suggest you try the procedure described in the below mentioned link and check if it helps.

    Printer in Windows problems:
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2: If the problem is not resolved, you can download the latest driver from the website link mentioned below manufacturer.

    Hope this information is useful.

  • How to connect a USB-wireless printer to a wireless network without PC

    Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

    The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

    Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

    Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

    Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

    When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

    Enter the network password if necessary and click Next.

    A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

    After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

    Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

    I hope this helps.

  • When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    Hello

    With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

    So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

    This will help you when you move frequently with the laptop.

    Docking station will save your time, outside any other aspect, that it has to offer.

    Zaki.

  • Cisco Connect v1.4 for Mac - cannot add the USB printer

    I just installed Cisco Connect v1.4 (11266.0) and have updated my software 1.0.03 E4200.

    I want to add a printer USB connected to the router, but when I open the Cisco Connect, then select the "add new devices... "button, the only option for a printer is"Wireless Printer", not"Printer"followed by USB or wireless user guide. There is now way to add a USB printer. Any suggestions?

    Hello.

    It is an old Bill, still not fixed!

    http://homecommunity.Cisco.com/T5/Cisco-connect/no-option-for-USB-printer-on-Cisco-connect-1-4-11266...

    Greetz

Maybe you are looking for