loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

to detect new updates for network based components on intel:

http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

You will be asked to download and install active x components.

After the installation of the small file, click on the "expand all" button

You can choose to update your components wired network if necessary.

then re-install your wireless network management software.

assuming that your wireless network is intact (connected, permits), you can surf the net.

If the problem persists, troubleshoot more away:

When the computer is turned off, set again you netgear pci wireless adapter.

set of antenna for optimal orientation.

Check if your computer is authorized by your wireless router.

check the signal strength of your wireless router and the wireless pci adapter.

Tags: Windows

Similar Questions

  • Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

    Hello

    First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

    So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

    In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

    -Device type Other devices

    Reference of the manufacturer- Unknown

                         Location     -         Bus PCI 3, device 1, function 3


    Under device status, it says the following:

                           The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information

    To find a driver for this device, click Update driver.

    Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

    list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

    I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

    computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

    the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

    He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

    I could really use some help here.    Any ideas or help would be greatly appreciated.

    Thank you

    Bryan Ray (Richmond, WILL)

    BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

    Thanks Steve!

    Roger

  • Network of the island so no internet access remove a yellow exclamation point in the network icon in the taskbar.

    Hi, I have 10 windows 7 Enterprise workstations connected to a Windows 2008 domain and there is no internet connectivity (this is normal) but each workstation network icon displays an exclamation point yellow because she had not any internet connection. Isn't there anyway other than hide the icon which I don't want to get the yellow exclamation point to appear.

    Thanks Simon.

    I finally found the answer. If you are running Windows server 2008 R2 edition, then you can find this policy in the strategy of Group Editor and it will be effective for your Windows 7 machines. If this is not the case, as I am on Windows server 2008 standard and then, is not an option within the Server Group Policy Editor must therefore be as a change in local policy on the workstations.

    It is found on the local computer by running gpedit.msc and looking: -.

    Local computer policy,

    Administrative templates,

    Network,

    Network connections,

    Does not display the network icon "local access only".

    Select this option enabled.

    Closing of session and immediately and this will make the yellow exclamation point icon disapear.

  • Satellite C660 - no access Internet - yellow exclamation point appears

    Hello

    I have a toshiba Satellite c660 and there serious internet problems.
    When I turn it on, it says that I don't have access to the internet but when I try to use it, a yellow exclamation point will appear then down down on the wifi icon.

    If I click on the internet icon and it says im connected to the internet, but I have no internet access.
    I'm really confused as to what to do. Internet days might work for a while and then all of a sudden the exclamation point appears there and I can't get working again.

    If anyone has any ideas on what is wrong or how to fix Tournay would be GREAT. as for now I can't use the internet wireless on my laptop.

    Thank you.

    Hello

    I think there could be a problem with your WLan router.
    I recommend to reset the router and try again

    If this is not enough, clear all settings of encryption like encryption, password encryption, mac address filtering, etc. and try to connect again to open WLan.
    But this just for testing purposes

    If the connection would be functions, you must configure the router once more.

  • Code 31, Microsoft IASATAP adapter doesn't work does not correctly, the yellow exclamation point, no internet

    I have Emachines E620, Microsoft Vista and service pack 1. My PC cannot connect to the internet and stop a yellow exclamation point error message. My internet providers technical support, I lost my IP address and cannot be recovered. My PC shows that my card Microsoft ISATAP does not work, but when we try to update, it says I have the updated version of the adapter.

    I tried everything the system fixed but did not work. Can't try bugs online because I can not connect to internet. My research on the Internet, maybe I need service pack 2. Can someone tell me if this could work? If so, what is the way least costly to achieve? What does it mean that my PC is undesirable?

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e5f8973b-0079-4E2B-8da4-7bbd345b9426

    Read the info above from Microsoft Support.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.eMachines.com/support/drivers.html

    Go to the Web site of emachine'ss to the above link > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now that you have no Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cisco vpn client to connect but can not access to the internal network

    Hi all

    I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

    Any help would be much appreciated.

    Hi Samir,

    I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    (The link above includes split tunneling, but this is just an option.

    Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

    Let me know if this can help,

    See you soon,.

    Christian V

  • Satellite Pro A300-22F - WLAN is listed with a yellow exclamation point

    I just bought an A300-22nd.
    WIFI does not work - in Device Manager the conroller of network (under 'other devices') has an excalamation mark on it - the problem is not installed driver.

    Laptop came with a sheet of additive of toshiba on problems with wireless connectivity - which goes through how to install the driver. Two problems - the leaflet is reserved to L300 L300D and copying is of such poor quality that I can't read the instructions!

    I know that this phone has WLAN (a, d, g and draft n), and it has a switch for him - what is on and lights up.

    At the moment I am connected to the router broadband - not much use as my PC is at the front desk even - I need a wireless connectivity!

    Help!

    Hello!

    On the Toshiba site, you can download all the drivers for your laptop and so he should t be a problem to solve this yellow exclamation point:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Download the driver the most recent and that s it! :)

    In addition, WLAN connectivity can be enabled using the hardware on the laptop switch * and * if you press FN + F8.

    Good bye

  • I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

    I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

    Hello

    1. what happens when you try to start the game?
    2. do you have messages or error codes?

    Follow the steps in the article mentioned below and check if this solves the problem.

    Known graphics issues in Rise of Nations
    http://support.Microsoft.com/kb/820089

  • My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

    My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

    Hello what jay,

    Thank you for your message.  Please, try the following:
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Click on "disk management".
    Here you see secondary hard drive?
    If so, you can assign it a drive letter and everything should be good.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I have Adobe Acrobat 9 Pro and serial number.  She asked an older serial number?  Help, please?

    I have Adobe Acrobat 9 Pro and serial number.  She asked an older serial number?  Help, please?

    Hi juneb55782770,

    I think you have a upgrade to Adobe Acrobat Pro version, in this case it will ask for the serial number of the previous version of qualification.

    You can find your old serial number using this link: quickly find your serial number

    Hope this will solve your problem.

    Answer please if you still have a problem.

    Kind regards

    Nicos

  • Windows 8 pro applications say that they are not connected to the internet

    I just installed Windows 8 pro and after installing, everything worked well. However, now all applications say that they are not connected to the internet.

    Shop Windows says "you're PC is not connected to the internet," However, when I go to the Office the internet works fine.
    How can I fix?
    I tried to make a new account and check my internet options, but nothing seems to work.

    After much more research online, I was able to find the problem for my computer. Before moving to windows 8, I had AVG internet security on windows 7, and apparently that's what was blocking the applications to connect to the internet.

    So if you have some type of antivirus or internet security installed, try to remove them to see if that makes a difference.
  • Genuine Microsoft windows 7 pro suddenly saying that he is not after 3 years, it has activated and provided by samsung?

    Hello

    Can someone help me on this please, all of a sudden my windows 7 pro machine is popping up on the screen of genuine advantage claiming he can't validate my machine. I haven't changed anything on my machine because I got it several years ago and it has been activated a long time ago.

    I ran diagnostics of genuine advantage from microsoft, it's out, what should I do?

    Thank you

    Ang

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Code of Validation caching online: 0x0
    Windows product key: *-* - 76HMH - M4RKY-V4HX6
    Windows product key hash: CegQyzk5Zd0qxFdtmueCy9UmviY =
    Windows product ID: 00371-OEM-8992671-00013
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {63CEAAF4-02B5-4C00-98D5-E02330FF6B54} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.130318 - 1533
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Professional Edition 2003-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

    Other data-->
    Office details: {63CEAAF4-02B5-4C00-98D5-E02330FF6B54}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-V4HX600371-OEM-8992671-000132S-1-5-21-1180976754-291495307-1985554706SAMSUNG ELECTRONICS CO., Ltd.. P580                       Phoenix Technologies Ltd. 06JM. M014.20100903.Ksy20100903000000.000000 + 000EC1D3407018400FC08090409GMT Standard Time(GMT+00:00)03SECCSDLH43STAR100100Microsoft Office Professional Edition 200311A28810AA593CDD28Es8iIR/tvVHonHzxe7ANLtWMHs =70145-745-6302996-573871

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00178-926-700013-02-2057-7601.0000-2502014
    Installation ID: 006732564226349160458242469416619292799903544266779954
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: V4HX6
    License status: licensed
    Remaining Windows rearm count: 4
    Trust time: 09/08/2014-00:39:58

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event timestamp: 9:7:2014 13:58
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current HWID of Hash: MgAAAAEAAQABAAEAAAACAAAABAABAAEAln1cP2oDIO3COF5syizMguwO2O6uWj5kXF0 =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC APIC PTLTD
    FACP INTEL CRESTLNE
    HPET INTEL CRESTLNE
    START PTLTD $SBFTBL$
    MCFG INTEL CRESTLNE
    SLIC SECCSD LH43STAR
    TCPA PTL CRESTLN
    SSDT PmRef CpuPm

    This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

    Intel rapid storage driver installation

    try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

    (you want the download of iata_enu.exe)

    Once complete, please restart twice, then after another MGADiag report.

  • Update Windows XP 32-bit to Windows 7 Pro, I get a validation error when I try to jump online help?

    Windows update XP 32-bit to Windows 7 Pro 32 bit, when I click on internet explore it gives me error

    process name: iexplore.exe
    module name: mshtml.dll
    affirm the offset: 008BE823

    Maybe its best to just a custom install of Windows 7 and see if that fixes the problem.

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  • Connected but no internet access? ... Help

    Hello

    If someone could help me that would be great!

    I rented a House and do not have access to the modem. I have a 2 year old HP laptop. When I connect to the internet it says connection to the internet and internet access. then, when I try to watch a video or anything of that kind, a yellow error sign appears in the signal at the bottom bar. It then says connected without internet access!

    Why is it that / is there a way to fix it? I need to start the work of the school and it does on every 10 minutes and I have to disconnect and reconnect!

    Can anyone help?

    Thanks in advance!

    Hi Helpthisgirl22,

    1. are you using a cable or a WiFi internet connection?
    2 have had any changes made to the computer before the question?
     
    See the methods mentioned below and check:
    Step 1:
    Why can't I connect to the Internet?
     
    Step 2:
    Windows wireless and wired network connection problems
     
    Hope this information helps.
  • Satellite L350 does not connect to the internet, network adapter yellow exclamation

    Trying to help my Nan with his laptop...
    Model is Satellite L350-170

    Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

    She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

    All the drivers can be downloaded from the Toshiba UE driver page.
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
    Then, you will get the list of drivers.

    If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

    You asked how to remove the network card?
    Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
    Click the single LED adapter, and then press or click on uninstall button driver

Maybe you are looking for