Loss of quality when recording in pdf format

Similar Questions

• Gradients of disappear when recording in pdf format

  I've seen questions related to this application before, but I can't find the answer in the messages.

  When I save my illustrator CS5 file to PDF gradients disappear.

  Is this a bug or is there a way around this issue?

  If I switch to CC with this help?

  Thank you very much!

  Hi Monika,

  I just stumbled upon the answer!

  It's because I used a mixture of pantone and RGB colors to create the gradient.

  When I changed them all to pantone or RGB, it has exported to PDF perfectly.

  Thanks a lot for taking the time to help.

  Dan

• Piercing group option not applied when recording in pdf format

  Hello!

  Worked on a logo that has suddenly brush realistic research - meaning vectorize the characteristics of the project of hundreds of differently shaded layers. The logo features a layer of flower shape to be cut in the logo.
  The matter shortly: Is it possible to cut out the outline of the shape on a group that features 'say cent' layers of different colors (30)

  I tried (without a desired outcome):

  -Pathfinder - less before (with click) works only with this group
  -Pathfinder - less before (alt/option + click) making it a compound path - does not because it turns the whole group in one color
  -Option group piercing under opacity settings, who worked first - but save the file as a pdf, the knockout group option does not work. She is either disabled or forms of flower as group piercing are white.

  I'm using Adobe Illustrator CC

  

  Thank you!

  The purpose of "mask" is not in the area of tile "Opacity mask" in your first image. Make sure you the flower above the layer objects, all select and choose "Make opacity mask" in the Panel flyout transparent menu. This will be above a mask. You can then turn OFF "clip" in order to see the outside part of the mask.

  Should look like this:

  

  You can have more than one article on the mask opacity and different values. Color is ignored.

  Please note: WHEN you first create an opacity mask will only recognize the subject of top-level (or compound shape). Later, you can edit and create objects on the mask at will, just like in normal mode. By default, only the mask 'effect' is visible. To display ONLY the mask OPTION + click on the thumbnail of the mask.

• Loss of quality when saving to a file of the CS6 to CS4 (IDML) to work on CS5?

  Employees of super good day!  I would like to know if there is loss of quality when recording in a file of the CS6 to CS4 (IDML) to work on CS5?

  The only loss should be all of the new features in the latest version that are not available in the older version not will be not paid.

• Model of printers is not displayed in Preview Mode of overprinting or when exporting to PDF format.

  Hello-

  I have receid a model from a printer which I can see in my INDD file, but it does not appear in Preview Mode of overprinting or when exporting to PDF format.  I would like to be able to export works of art with the model visible to the customer for review and audit purposes.  What settings must change to CO-OPERATE if the model is visible when I export to PDF?

  Check if it is on a layer marked as non-printable, or if the non-printing attribute is checked in the control panel. You will need to change whrever find you.

• I've created an Apple it to import the template in word, but the quality is shoking during recording in pdf format

  Hello

  I am trying to create a letterhead design. He is superb in artificial intelligence and when printing to HAVE.

  I have record earnings per share and import them into Microsoft Word. I have placer place in the header of the page, and then save as a Word template. Print, save, and still seems ok.

  Its when the Word template is then saved as a pdf the colors change and looks like garbage. I need in pdf format to allow for more secure emailing

  I'm doing something wrong with the import settings?

  

  Hello

  I had a bit of a piece and I found an option that says "save for microsoft office" at the bottom of the menu. works and prints ok in word and pdf.

  Thanks for your time

  

• Loss of quality when importing video to the editor. What should I do?

  I did a HD video with my camera and need to change it, but when I import it into Adobe Premiere elements 13 quality decreases. How to maintain the optimal video quality when importing it?

  Arthurs

  What version of Premiere Elements and on what operating system works - it?

  What is the brand/model/parameters of the camera that records video? What is the file extension that is associated with the file? What is the bit rate of the file that is imported?

  Is the decline in quality import and when you watch the video in the Edit area monitor? Or do you see loss of video quality when you view this Timeline content export? When you view the video in edit box monitor, you're looking at timeline rendered or unreturned content? No coloured line, orange line or a green line on the content of the timeline?

  What you are (manually) or the draft definition (automatic) the project preset to match the properties of the video source? Please tell us what the readings are for the fashion edition of time base, image size and Pixel Aspect Ratio (even if the appearance of the gray fields) under Menu/change settings/general?

  Many more questions on dating on your video/graphics card version of the pilot and others, but let us examine and consider the foregoing and then decide what then.

  For any question or need clarification, please request so that we can customize a response for you.

  Thank you.

  RTA

• Record in PDF format

  Hello

  Hope that you're enjoying the weekend.

  I work in an Illustrator document that will eventually be a PDF. I do test record to see what it looks like in PDF format.

  However, she does this every time it seems to also save it in Illustrator in PDF format, because when I come back to Illustrator, the file is a document illustrator with a .pdf file type.

  Is anyway to avoid this?

  Thank you!

  graph,

  You can save a copy in PDF.

  You should always do or close the document after the backup.

  If you save to PDF without preserve Illustrator editing capabilities, that PDF is no longer a file HAVE, so you can destroy your documents by saving.

• Loss of quality when sharing

  I've recently updated to Windows Movie Maker for first Elements 8 and when I burned my project, I noticed a significant loss of quality.  The source media is pretty poor, I use a Panasonic VDR-D160 DVD from camcorder mini (Yes it's a nightmare do total import images), and when I import images is a. VOB file.  The stats for the. I work with VOB files are photos of 704 x 576 which goes to 25 frames per second.  The flow is 9558 kbit/s and the total flow is 9814 Kbps.

  The first project that I did is very simple, with minimal editing and without effect.  However, when I burn it to a DVD or a DVD file it modifies the image and 720 x 576 and reduces the data rate and bitrate 7464 Kbps 7656 kbit/s respectively.  This creates an obvious pixelation of the image, especially for the parts of the video that move and can be seen on TV in lower resolution.  Sharing/editing the video, how to keep the same quality as the original?  I have been through the help, and due to my lack of understanding of the elements of the first, I was not able to determine if it's just a matter of changing the settings.

  Thank you!

  Unfortunately, you start with a material that has already been compressed heavily to the format/CODEC MPEG - 2. Then you are editing and a Scaled upward (the DVD spec for PAL) out and then re-compressed in MPEG-2. It is a triple whammie. Because the pre does not have "smart Rendering", what you see is what you get.

  A better choice for the limited edition, basically just cut the material, would be a program that "smart," where all the material, which is not changed, except to remove parts of it, would NOT be converted a second time in MPEG-2. I think that some of the products Sony Vegas, but there are others. If you Google "smart rendering", you will see several programs that have this. I would choose those.

  You will always have the question of the scale, unless you allow your more completely than the electric material specific to be surrounded by black. If evolve you in editing software, even with a smart rendering, it must then be transcoded into MPEG-2 all over again.

  With images, the choices are very limited.

  Good luck and sorry for the bad news.

  Hunt

• Column width set to 0 when printing to PDF format

  Oracle Application Express Version: 4.2.0.00.27

  Apex listener Version: 2.0

  We have a classic report with 20 columns. Out of them, few are conditional.

  We use attributes of the print to print the report in PDF format. The problem with the PDF and printed, it keeps the column width of all the columns in the PDF file, even if they are hidden. We put the column width for all columns of 20 in the print attributes section.

  Can we set the column width to 0 in the PDF output for columns that have hidden due to the State?

  HI - so what you are trying to accomplish? The conditional columns are not included in the PDF file. And the column width for the PDF file is set as a percentage of the available space. So I guess that what you need is for the remaining columns, i.e. those who are included, to fill the available space, but is not because even if the conditional columns are not displayed, they still use place. Unfortunately, there is currently no way to conditionally set the column width, or update the width of the columns according to the conditions. You can try your own custom report layout, or use the APIs of printing for export and under certain conditions using different presentations.

  I'll take a good score to see if we can improve the logic using the layouts of integrated report to be a little smarter on the use of space when the columns are excluded under certain conditions.

  Kind regards
  Marc

• Save location by default when printing to PDF format

  Hi all!

  I'm working on a remote server with r2 Windows Server 2012 and when I print the format PDF Adobe prompt me where I want to save my file the default location is drive c. server that I am connected.

  Is there a way I can change the default location to a specific folder on the C drive of my local computer and not the server?

  Hi djvaldes21,

  You can select a folder where default Acrobat will save all files when convert you to PDF using Adobe PDF printer.

  To do this, open the printer Adobe PDF Preferences and change the location of the folder desired under the label 'from Adobe PDF output folder. Click Browse to add or change the output folder.

  Hope that helps.

  Kind regards

  Ana Maria

• Loss of quality when scaling down

  I have a Camtaisa screen capture video which is 1738 x 1188 (Fig 1). I wanted to reduce the video in AE CS6 to fit a little better in a 720 p timeline so that I can make a few simple dishes throughout the image. However, when I've scaled down (75%) the image loses a ton of details and gets pretty sweet (photo 2). I think it would get more net - this seems completely contrary to intuition for me and I tried several options, including continuous rasterization and make 3d layer and scaling but no joy on either. Any ideas on how to put the image down so that it fills several of the model 720 without losing sharpness of details? I'm not zoom, I repeat... I'm not zoom - so this isn't the issue.

  <-sharp<-soft

  Come to know that he was actually replacing the PP timeline with a model of EI that results in the loss of quality. CNTRL-I put in the PP chronology in AE kept them more clear.

• Lines/undesirable traits around object when printing to PDF format

  Hi all

  When I place a document in Adobe Indesign CS3 it seems perfect on the screen.

  But when I print to PDF in the PDF file, most of the objects show the wrinkles around them.

  Of course, I put the race to '0' and color 'None '. The traits do not arise in Indesign and not when printing to printer directly.

  But when I save it as a PDF there are all of a sudden these traits in the PDF file.

  The features appear on Indesign (example oval and text objects) objects, on inserted EPS, TIFF, PNG, and GIF.

  Can someone tell me what what should I do to prevent these features around the display of the PDF object, printed Indesign?

  Thank you in advance, I appreciate all help.

  Best,

  JP

  The white lines are called artifact sewing flattening transparency. Instead print format PDF, EXPORT to PDF format and using Acrobat 5 or greater compatibility, who will be leaving the live transparency and eliminate stitching artifacts.

• EN multiply when opened in PDF format

  At the opening of certain reports in PDF format the report multiplies 3 or 4 times. A 2 page report the same pages will repeat 3 times such that the total production is 6 pages. Has anyone experienced this issue or know a fix?

  Thank you

  FA

  Never mind. It is the result of multiple options page.

• CAD drawings can be flattened when converted to PDF format - OR - software free Adobe can flatten a PDF file?

  I get CAD drawings converted to PDF format on a regular basis to clients using various CAD software systems.  Almost always, the PDF retains the layers created in the CAD document.  Preserving layers significantly slows down the loading time of the PDF and increases the file size as well in my opinion.  If the layers are not selectable or in a list, I can see load a (ie. topo, plans floor, title, block, etc.) on each page of the PDF file.  Does anyone know how to remove the overlay effect?  I heard the PDF file must be "crushed" or perhaps the CAD software is export to PDF there is a parameter that would flatten the layers.  However, I have not the possibility on my PDF software to flatten, and my architects/clients use different CAD software systems, so I don't know how to educate to flatten documents.

  Hi Katie,

  You can flatten the pdf using Acrobat, here's how: choose Tools > print > Overview of flattening.

  For detailed information, please see the following link: https://helpx.adobe.com/acrobat/using/transparency-flattening-acrobat-pro.html

  Kind regards
  Rahul