loss of space Go

My friend downloaded ios 10 on my 6s I lost GB space I have deleted all my apps and still losing GB I connect to itunes and get error 54. How to return to 9.3.2 or 9.3.3 ios?

See the documentation for beta of iOS.  There are also sites that also explain the decommissioning...

http://osxdaily.com/2016/06/16/downgrade-iOS-10-Beta-to-iOS-9/

We are not allowed to discuss the beta version of iOS 10 here - and your friend must have agreed to an NDA that makes against the mandate to discuss it here.

Good luck

Tags: iTunes

Similar Questions

  • Installed XP PRO (HP OEM OS) on an all new 200 GB, severe loss of space!

    Hi, I received great advice a few days ago and buy a new 200 GB for my mobile HP6710b, the original HD crashed and was not accessible.

    I used a Windows XP Pro Service Pack 2 OS disk, OEM HP disc. In advance I downloaded every driver offered by HP for this model 6710 b. The installation went smoothly, even though I had to call Microsoft for a new work product key. As in my old HD, they used a disk for the recovery partition and I put aside 1084 mb (recommended minimum).

    Once completed, the system told me I ' did not have enough space and I need to delete some files for space!  In properties, 'C' indicates only 1.5 GB of total space and available as freespace only 1%, so I'm perplexed and completely baffled.

    I'd appreciate ANY help.

    Should I order a recovery CD?

    Thank you

    Install the Chipset and other drivers of the USB by clicking on each to run it automatically install in the right place.

    Go to your My Documents folder and create a new folder. Name downloads. Then download your other Audio drivers, etc. and direct to save, choose new file downloads as a place to record. Once all are saved in this folder, open the folder and click to throw each of them to install.

    For audio, you will need two files in the Audio category, install the MS UAA before ADI Audio driver. HERE

  • Loss of space Windows on Macbook Pro... Help, please... Thank you

    Dear community of VMWare,

    I have a little problem and I would be happy if you could give some advice.

    1. I have a Mackbook Pro HD 232 GB and 8 GB of RAM.

    2. with the help of VMWare, I installed Windows 7 and allocated 90 GB HD and 3.5 GB of RAM.

    3 OS X Disk utility confirms 90 GB of my Macbook Pro HD has been used.

    4 VMWare settings also confirms that Windows has been affected 90 GB of disk space.

    5 mac and Windows work fine.

    Problem - Windows drive C (the only drive in my windows) has only 40 GB. I would be happy if you could help me understand where the 50 GB went.

    Thanks in advance.

    RE2015

    On guest Windows VM, open Manager (diskmgmt.msc) disks and check if you create a partition by using all the 90 GB drive, otherwise, right-click the partition and select 'Extend', then the partition uses all unallocated space.

  • Problems of loss of space with ESX 3.5i (URGENT)

    Hi all

    I had a DELL power edge 2950 ESX 3.5i with a raid 5 installation disc and loaded with more than 500 GB of space.

    Got

    4 VM miss this topic with much question (dv01, vm02, vm03 and vm04).

    Sometimes the last week, I noticed my ESX froze on me and not answered.

    then I managed to restart and then noticed I had only 2.0 GB of free

    space on the data store, when a week before I have more

    200 GB free.

    So I browsed the data store and noticed all the VM has had a new *. VMDK

    files inside the folder of each VM. marked dv01 - 000001.vmdk.

    VM02 - 000001.vmdk etc... showing a different size and the original

    VM01.VMDK display of the original size.

    When I add all these new files 000001.vmdk, it represents the entire lost, I lost.

    I am

    out of options and do not know what I can do to stop this mess.

    Why all the VMS create all these additional disks and lose all my

    space. I loaded the last 3.5i ESX patch and that seems

    Help. I had to remove a VPS I barely use it just to keep the box

    living and now only have about a week or more, until the space is lost once again

    and down to the free ogb.

    (See attached files, which shows a VM of 120 GB drive, and now he has created a new 0000001.vmdk of 70 GB file)

    Can I remove all these new 000001.vmdk of each virtual computer folder files?  or vice versa? Any help would be great.

    Thank you very much.

    You must create a world of pain! Whatever you do do not remove the basic disk - it is used for read access. All entries are in the delta (snapshot) until you commit (remove) the snapshot via the Snapshot Manager.

  • Amount of available hard disk space

    I have Windows Vista Ultimate and whenever I connect I have less space in my hard drive but I have most of my documents on an external drive.  I tried to follow the advice of the community here, but nothing worked so far.  How can I prevent the loss of space?

    Hello

    This free program allows you to see what is taking place.

    http://www.Jam-software.com/treesize_free/

    Here's how to understand Treesize Screenshots:

    http://www.Jam-software.com/treesize_free/screenshots.shtml

    _____________________________________

    By default system restore also includes 15% of the capacity of your hard drive.

    You can change the size of it:

    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

    ____________________________________

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

    See you soon.

  • Pavilion 500 lost disk space

    I bought a pavilion of 500 about 2 months ago and have been using it without any major problems.  However, I've noticed something recently that I would like an answer: it has to do with an apparent loss of space disk (HARD drive).  More space on the disc's video files.  Here are the details:

    Said Disk Manager drive is healthy, and the OS partition is GB 1842. (Size of HARD drive supposed to be 2 TB)

    Properties says space Total is 1.79 G, space used is TB 1.68 and is 114 GB free space.

    However, it is actually used space:

    Recycle Bin = 70G

    Program files and Windows = 4G

    Users = 449G

    Hidden files is negligible.

    This means that my total actual use is 523 GB.

    But then, where is the TB 1.15 claims of properties is used, but is not used?

    I need an answer soon, as a space of 114G will be consumed quickly using more away from the video.  This system is only 2 months old, this looks like a major problem.  Is this a known issue?  What is the solution?

    Hi S_Miller_1960,

    HARD drive manufacturer calculate the capacity of the HARD disk as a TB = 1000GB. Windows uses 1024 GB. This does not account for the total disparity in your analysis. It has NTFS formatting overhead and the use of HP Recovery disc.

    Here is a link to free tools that can be used to analyze hard disk space usage.

    You may find your answer by using one of these free tools.

    Jaco

    I'm not an employee of ch *.

    "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

    HP products:
    810-150se office
    17 t - j000 Notebook
    1380t Desktop
    560z Desktop

  • Use other media space and alternative

    For PC laptop HP Pavilion with Windows 8 g6:

    (1) according to the online guide to create a collection using a USB drive, the disk should have at least 32 GB of space. If I were to get a 64GB drive to create my recovery that only ends up taking for example 40 GB of space, can I use the remaining 24 GB in all cases? This would be appropriate in all cases?

    (2) if I had a disk external DRIVE with USB, no new material or use connection and he put more than enough space to create a collection, can I use it for this purpose? This would be appropriate?

    Thank you for your help.

    BenditoSoyYo wrote:

    For PC laptop HP Pavilion with Windows 8 g6:

    (1) according to the online guide to create a collection using a USB drive, the disk should have at least 32 GB of space. If I were to get a 64GB drive to create my recovery that only ends up taking for example 40 GB of space, can I use the remaining 24 GB in all cases? This would be appropriate in all cases? No. When you create the recovery media should only be used for this purpose. Make the usb flash disk media recovery and put it somewhere safe. 

    (2) if I had a disk external DRIVE with USB, no new material or use connection and he put more than enough space to create a collection, can I use it for this purpose? This would be appropriate? No. it would be a serious loss of space in the drive hard usb. Only use the recovery at its destination media and it is for recovery.

    Thank you for your help.

  • Differences of the G20-118 HDD and Qosmio Player

    Hi all.
    I purchased a Qosmio G20-118 and theres a small diference between the hard drive.
    It has two built in 80GB HD, but in the bios, I see the first HD 79 GB and the second as 80 GB.
    Where is the 1 GB missing from the first HD? Qosmio player?
    If this is the case, then the RAID function only works with two 79GB HDD so I lose 2 GB HARD drive plus the loss of space for the RAID function aditional. If a drop about 5 GB of HARD drive.
    How do I get arround this?
    What I need to get rid of Qosmio Player to have two HD 80 GB? If so, how can I get rid of him?

    Thank you!

    Hello

    You are right. The Qosmioplayer is preinstalled on the hidden partition. Because of this, the HARD disk capacity is less than 80 GB.

    In my opinion the Qosmioplayer is very nice and useful tool and it is not necessary to be deleted. If you want to use any ability of the second HARD disk do not use RAID option.

    Do the backup data on an external device. On this way, you will lose 1 GB available on both hard drives of 160 GB.

    Otherwise you must preinstall the unit with recovery media. After that the Qosmioplayer is deleted.

  • Move from Vista to Windows 7 - partitions

    Hello!

    I just got my new Thinkpad SL500 at home - with Vista Home built in. I think to upgrade to Windows 7 Professional, but I have to ask about partitions.

    There are 3 partitions on my hard drive:

    C: partition system "SW_Preload".

    Q: "Servicev003 system boot partition."

    S: recovery partition "Lenovo."

    I don't know that I can get rid off the coast to keep my Lenovo features intact while changing Win 7 (I've seen change, because the real change would be not an upgrade, but complete reinstall with deletion of the old system) partitions.

    Can I delete the partition q: "Servicev003?" Is - only used for Windows Vista or the only some features of Lenovo recovery? And the score of "Lenovo"?

    All drivers are already available for Windows 7 Lenovo utilities?

    Thank you for all advice.

    George

    Hello

    The Q score is to begin rescue and Recovery in case your partition C cannot start. Then you can restore your system to the image of the factory of the partition of S. The S partition will contain your Vista Home image, so it's not useful for you once you upgrade.

    First thing you can do is to generate these partitions recovery media. You can use R & R to do. You will get a bootable CD with R R & Q score and two DVDs of the partition of S containing Vista.

    Personally, I then removed the two partitions and installed Windows 7.  You can then use R & R to generate a new image of the system on a DVD. I recommend waiting until you have all you apps installed and the system set up. If you need to recover, then you start from the R & R CD and recover from the DVD.

    I believe that it is possible to keep the partition Q but the boot sector will be replaced by Windows 7 so it needs to be restored to allow to boot in S. As I have never done this, maybe someone else can help.

    The only way to get a full range of partitions is to use an image of Lenovo. I do not think that Lenovo offers these?

    Personally I prefer for other alternatives of R & R like Acronis True Image, but the principle is the same, a bootable CD, then the image of an operating system on another media such as DVD or a network drive.

    10 + years that I've never had to do a full restore so the convenience of having R & R available on the blue button does not for me outweighed the loss of space on a small SSD (80 GB).

    Carpet

  • Where to get help with 'discourse analysis '.

    Yet once... lived so many tutorials that mention analysis of speech as a great tool and show a little fast (feed really)... but no details to work with speech analysis. It's not even in manual P - Pro, NOR in the Media Encoder manual (which is the 'analysis'). Although on a thread in this forum, that a member of the staff said that the text is placed in an xmp file... so if you feel uncomfortable with the dissection xmp files, a single pourrait be able to change something in one, I find not a xmp for this.

    SOUL lists the place up on the users folder, where he created the file... but it is not apparently editable in a text editor... and I don't want shit put there anyway. Deleting these files have no EFFECT to the text in the Panel of "metadata" in P - Pro, it's still there... as bad a deformation of the interview than ever before. So clearly the file created when the user by AME is a bloat-total loss of space.

    Is there any place that includes direct assistance in working with the analysis of speech, or actually is this "feature" just another at Adobe to push to the public that we should avoid at all costs and the perils of his projects?

    Neil

    R. Neil Haugen wrote:

    So I don't have a script at first... and this tutorial is totally based on the use of a previously created script.

    Any other ideas?

    Hi Neil,

    Sorry this does not work too well for you. It is disappoining if you do not have the following information:

    "Good speech to text workflow depends on having a script to fix the researcher."

    Even if you have a script, always have some mistakes, more than likely. If you don't have a script, the best thing I can suggest is to send it to a transcription service to do it for you.

    As you discovered, without script, speech to function text is quite difficult to work with, because you have to do so many corrections. As you have also discovered, it is not easy to make these corrections.

    I think you have 3 applications of solid features here:

    1. Make it easier for users to make changes to the metadata.
    2. Analysis of speech should respect the subelements and entry/exit points in the analysis of speech.
    3. Improve the analysis of the speech as a script is not required (the application more difficult to complete).

    Feel free to make them. Here again is the link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

    Thank you
    Kevin

  • Where are the stored files when creating a package using CCPLauncher?

    I just bought Windows 7 Captivate. I need help to install the software. I downloaded the CCPLauncher.exe and specified options to build a package, however, I ran out of space on the drive. I quit the CCPLauncher.exe and I want to start it on another computer that has more space. However, I want to clean up whatever space the build process has consumed, but I couldn't find where the files who took all my disk space were... the CCPLauncher.exe is only 2.5 MB. But I loss of space much more than that. Note: I build the Pacakge on Server Windows 2003 STD, but I clear worm 64-bit because I'm not going to deploy the package on the computer in Windows 8.

    Hi CalvinNova,

    Here is the location for both Windows and Mac:

    Location of Windows - C:\Users\\AppData\Local\Adobe\CCP\AdobeCCPCache

    Location of MAC - ~/Library/Application Support/Adobe/CCP/AdobeCCPCache

    Kind regards

    Romit Sinha

  • use speedgrade looks like in first pro

    Hey all,.

    I hear the first CC allows you to export a dpx and then build the looks, and instead that export the images of speedgrade, causing an edit lock, the loss of space and time, in transition you can just apply the saved file, look at the clips in PP...

    This is a characteristic of pious and worth much more that I pay for cloud creative lol. The only problem; I have no idea how to proceed.

    Here's what I did.

    Load the clip you wish to correct/in speedgrade color grade.  Once you have the desired look you want, press ctrl + p (mac: Cmd + p) to save the appearance.

    Then right-click on the new look preset that you have just made and select 'Export search' menu will appear.  Select "export".  Save the zip somewhere on your PC

    Open the zip file and extract the. Look file or .cube since the zip.

    Open first, load a project.  Add the 'Lumetri' for the music video of desire.  Lumetri will ask you to find a LUT to add to the clip.  Go to the. Watch extracted or .cube do you leave

    SpeedGrade and now you're done.

    I hope this helps

  • How to automatically remove comments from model in the page created from template?

    Hi all

    I would like to eliminate generated Dreameaver of comments in published pages.

    Beast, perhaps, but they are really a loss (of space, bandwidth, etc.).

    Does anyone know if there is a way to automatically eliminated in the pages that are generated from a model?

    For example, on this page:

    http://Libri-belli-Ma-anche-romanzi-Brutti.it/Daria-Bignardi-Acustica-Perfetta.html

    a comments from the original model.

    <h1><!-InstanceBeginEditable name = "Autore + Titolo"->Daria Bignardi: craftmanship the Acustica<! - InstanceEndEditable - >< /h1 >

    Someone at - it a suggestion on how they can be quickly withdrawn before publication on the server?

    Thanks all!

    Riccardo

    No, can't be done.  Markup DWT tells the program that it is a model.  FrontPage/Expression Web also has the TPL files and uses a similar markup for its models.  Only way to get rid of it is to move to a language server as PHP or CMS solution that includes uses side.

  • First Elements 9 - output video does not not in the source frame size

    I am using first Elements 9. My source of the layer film is 1080i 1920 x 1080. During the edition I have no problems at all, all lines upward. The video is 38 minutes. I use the SHARING option and the subset of the COMPUTER, with a custom preset to export for a bandwidth limited distribution of data (< 800 Kbps). The end result is a 38 minutes long video that's a little more than 150MB in size. He reads very well, quality is what I expected it to be for this size, but here's the question...

    There are 2 black vertical stripes on the right and left edges of playback. The original video is very good, these bands are actually add on. The edition size of the image and the export frame size is 640 x 360, which I believe is close to the default size of youtube. It feels like the exported video allows more like 720 x 360, and to compensate for this loss of space, it makes the area on the left and right of the video, that when editing, has been hidden. So what we get is this "behind the scenes" areas where I can see titles fly in and out that normally you shouldn't see, etc..

    In addition, some images were objects that are part of the schedule, shifted to the right or left by almost 100px.

    That's where I'm looking for any help / suggestions you have.

    Thank you

    To make sure that I'm following correctly, you are importing 1920 x 1080 videos with square pixels, BY - 1.0, in a 640 x 360 project, with a NORMAL non-recognition. Is this correct?

    The edition size of the image and the export frame size is 640 x 360, which I believe is close to the default size of youtube.

    How you handle the HD less than SD down-rezzing?

    Whence the image size of 640 x 360?

    Maybe I'm just confused, and something happens?

    Good luck

    Hunt

  • Question: Opinions/standard Industrial Designers'

    Hi all

    I am looking for information that I have not been able to find online.

    I'm designing 8.5x11 sell sheets for our account manager to use in sales. Our printer does not print a bleed (if I understand most do not) and therefore breaks off a small part of the document, leaving a white border around the outside.

    Should I design these sell sheets to take account of this print problem where potential customers want to print on paper themselves the .pdfs that the account manager will send an e-mail them? Or most of you design with a bleed is understood that most of the people are not print these types of marketing materials or if they print that they understand that it is not a design flaw, but also a question of impression?

    I'm torn between resigned me to the loss of space for design documents to come to welcome the white border or resigning me to fate of a document with a cut off when it is printed on a desktop printer?

    I would be grateful any information/advice from people who have faced a similar choice of marketing...

    Thank you!

    Consider 7.25 x 9.75 as long as your page size and you are good for all margins of the printer and drilling 3 standard. Feels like a handcuff at the beginning, but get used and you have something without constraint.

    Background parts lost are not good for the exit House anyway. Why have someone blow all their toner on the background graphics lost that contain no information? For me, it is always better to have the end of the page layout where the designer tells it to rather than the output device. Even if nothing gets cut the printer margins make the entire room hokey.

Maybe you are looking for

  • Why apple IOS 9.3.2 requires an access code 4 digit instead of the previous 6-digit

    Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why? < published by host >

  • Graphic driver Win 7 Pro NB550D

    Always the same problem to find a valid device driver. If I download and install the driver is not the right driver in the package. Also tried to use the AMD driver and and and...Any idea? N. Post edited by: Nightmare0815

  • Satellite 2435 powers off the power when you try to install the recovery CD of OS

    Happy new year Satellite 2435 powers off accidentally when trying to install the operating system from disk with Windows XP Pro startup disk or recovery. When starting and working with Winternals AdminPak 5.0, Portable Edition Windows or Dos 6.22 it

  • Help my Photosmart HP 7510 a wireless connection.

    Test report said trurn off MAC filtering. It was not on. Use WPA with AES. I am able to connect Blackberry, iPhone, Ipad, laptops with success, even SONY TV. I even tried to book the 198.162.0.111 IP address.  Routwer newspaper said 7510 authenticate

  • 550-110: orientation tour

    OK to ask the Tower on the side for optical drive opens horizontally to the top? I know that in the old days, when engines used hard drives, orientation tour was critical. In my view, modern readers can operate in any position but would feel better a