Loss of T232HL Acer audio

Similar Questions

• How do I get audio acer taskbar icon

  same question as the title

  Hello

  Did you follow the suggestion provided by Nithyananda j. dated February 11, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-do-i-get-Acer-audio-icon-onto-taskbar/a45543fb-C018-4E07-b9d0-4b5158072ea0

  If the problem persists, then I recommend post you in the same thread to avoid duplicate threads

• T232HL using with laptop: key always assigned to laptop screen

  Hi all

  I have attached the T232HL Acer to a Vaio laptop, running Windows 7 64 bit. The latest version of the driver is installed. The touch works very well when the laptop monitor is mirrored or the screen of the laptop is turned off.

  But when I have the extension of the screen, so that the laptop and T232HL show different areas, the action of contact is always assigned to the screen of the laptop.

  In Control Panel, I made the T232HL the main monitor and I tried different positions, for example putting the T232HL on the left side of the laptop in the display settings. Nothing helps. The mouse settings, stylus and touchscreen Windows aren't any help either.

  How can I assign action to touch the Acer monitor?

  Thanks for your help,

  Tyron

  Tyron,
  I am sorry you did not set up your multiple tactile display configuration. I did some research on the issue and have found several topics on the issue. I found a "fix" of Microsoft if you have not tried, I would recommend download and installation; http://support.microsoft.com/kb/2618640. After trying to run the calibration tool as I suggested in my previous post.

  I also read, from a source of third party on the web, in Windows 7 touch input is limited to the main screen. According to Microsoft, Windows 7 native touch does not simultaneously support multiple touchscreens. To use multiple screens with touch input, you can use another touch APIs, such as the MultiTouch CornerStone C++ (or Flash/AS3), or touching information streaming protocols, such as TUIO or XML.

  If the "fix" does not solve the problem and you have the driver for Windows 7 of our support site, then it can be as above or a limitation of the driver that this monitor is compatible Windows 8 touch.

• How to fix sound on the Audio 1 track?

  I have Prem comp 12, but no experience. I have lost sound on the Audio 1 track. Have a sound on the Narration track. See the two lines wave on the track. Thank you

  Erics

  On what computer operating system is your first items 12 running? Have you updated 12 to 12.1 yet with a project open Help Menu/updates to date. If this isn't the case, please do.

  You have audio on any other track next to the Audio 1 and Narration track? Lost audio on 1 Audio once you added narration to the Narration track using Narration of the program tool?

  If you have 12/12.1 and have experienced loss of the numbered audio track audio and/or Bo when the narration of the storytelling tool has been added to the Narration track, then it is most likely that you have a problem known to first elements 12/12.1 which is described in the following blog.

  First Elements ATR troubleshooting: ss12: Audio dropouts after addition of Narration

  If this applies to you, please try the solution of Llamadude and determine if one of the solutions in the blog works for you.

  We will follow the result.

  Thank you.

  RTA

• Satellite R830: Agitated movies on TV by using the frequency of 23Hz

  Hello

  I cannot connect my laptop to my TV using the options of hz 23 and 24 for frame rates in the integrated graphic card software.
  Movies will play fine for a few minutes and it runs really rough.

  Curiously, Media Player Classic - Home Cinema does no loss of pictures and audio or smooth thanks to all cela.
  The video is jerky for a few minutes, and then it returns to normal.

  This cycle repeats. If I sit for the use of the frame of 60 hz rate is all fine and dandy, so I don't think it's the HARD drive.
  I am currently using the version of the software driver for the graphics card intel HD which is downloadable from this site but I also tried the latest driver on the site of intel, but none of them work.

  What could be going on here?

  Thank you

  /Sebastian

  Hey Buddy,

  I m a bit confused about your rate of 23 Hz normally on the LCD TV, you have 50 or 100 Hz screen refresh rate

  In any case, can test you it with another video player like VLC media player? It is really great to play all the multimedia controls freeware tool and I only use this player.

  Also try to use the power plan high performance if play you videos.

• His default intermittently T430

  The sound is a fail intermittently on my T430.

  Close and open the lid for access and return after hibernation sometimes restore sound. When it does not restart the machine usually restores sound. But the sound does not again after an indeterminate period.

  Opening of Ubuntu Linux in Virtualbox now displays the message "some devices audio (PCM_in, PCM - mic) could not be opened."

  I would appreciate any advice.

  Rob

  Lenovo ThinkPad T430
  2344-DAG
  Processor Intel Core i5 3230M 2.60 GHz
  8 GB RAM
  Windows 8

  As this problem appeared out of the blue, I suspect an update of Windows.

  Loss of windows 8 "audio" Googling update highlights a recent update
  KB2962407. Uninstall this update solves the problem.

  Of course, I now wait to see what other problems this unistallation
  causes :-)

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• Static microphone headset

  Hello

  I recently bought an Aspire E5-573 and I use a new headphone Sennheiser PC3 and an audio input/output separator.

  I have a lot of background noise when recording - on another laptop, I can just check the "noise removal" and it works fine - but here the only improvement options are 'personal call', 'registration' and 'disable' - they do not solve my problem.

  I tried to install all the latest drivers from RealTek but I can't the noise suppression option... I see that this laptop is running ALC255 while my other running ALC269?
  Is there a way to get this noise removal option? Statistics is quite significant and prevents me to make quality recordings.

  Is attached a photo of what I see and what I was hoping to get...

  

  Is there a way I can change the provider of sound effect to get the RealTek one and noise removal option?

  Thanks in advance for your help and best regards,

  It can be a crap shoot to non-Acer audio drivers working correctly.

  There are a large number of them working here. Maybe you can get one to work.

  http://www.Realtek.cz/Realtek-driver.php?Realtek=sound

• Dolby 8.1 noise problem Windows

  why I can't find a driver for dolby advanced audio v2 for windows
  8.1, I tried to install windows 7 but it does not work please help

  Acer Aspire v5 - 571 g

  You must install the supplied Acer audio drivers for Windows 8.1

  Acer Aspire V5 - 571 G Dolby Digital Windows 8.1

  You can't try to get the last yourself that the Dolby Digital will not work, as it is coded specifically for Acer drivers

• U2415, its port on the monitor using headphones (ongoing displayport) has an audible hiss

  Hello

  I have trouble with two U2415 SSS monitors that I bought this week, when I plug headphones into the monitor there is a low volume generated from the monitor. When I plug the headphones in the respective computer audio port, there is no whistle - just silence.

  It is not a problem when playing sounds, but saw the helmet wearing while there is nothing else game is boring and it is hard to focus.

  The sound comes on displayport monitors, and the volume is controlled by the operating system (Win10 / OSX via soundflower).

  The computers and monitors are all on the same land/Jack.

  Is it possible to fix this? I am at a loss, and frankly the audio port on the screen is useless in this State. It would be nice to make it work, because it would mean that I could reduce the number of cables, I need to plug / unplug it when you move stuff.

  Please find below information on the installation of my computer (s).

  
  The computers tested: Custom PC with nvidia gfx, MacBook pro, Asus Zenbook
  * OS: Windows 10, OS x 10.10
  * Video card: Nvidia GeForce GTX670, Intel Iris Pro 5200, GeForce GT 840 M
  * Driver version: Windows Nvidia 355.98, for OSX I don't know
  * Ports: PC: displayport and dvi, mac: lightning/miniDp, zenbook: miniDp
  * Ports used: dp-> miniDp, miniDp-> dp, miniDp-> RFP
  * Cable: the miniDp provided-> dp cable and a 1 m deltaco miniDp-> dp cable
  * Resolution: 1920 x 1200 @60 Hz
  

  Best regards
  Erik

  Headset must be connected directly to the computer, not on the screen. The U2415 user's Guide page 11 States, "use of the helmet is not supported for the line audio output connector.".

  

• After the effect CC does not sound

  My AE CC do not return sounds even I clicked on the menu without loss and take the audio option. My AE is the last version that I installed just 3 days back.

  Please can someone help me...

  See the last article here:

  known issues in after effects CC 2015 (13.5)

• . Mov smooth-> jerky .mp4...

  OK, this one intrigues me.

  I have this mov file without loss of 900MB nice and heavy.

  It is exported to Screenflow at the best possible quality (without loss, 1280 x 720, audio 48 kHz...)

  It plays fine on the mac.

  Except on this machine, I have more sources, so I'll have to work with it.

  I need to turn this into an mp4/h264, so it can be broadcast (end file goes to a mooc)

  Interestingly, I have, when the .mov file shows a really smooth screen recording, any attempt and settings tweaks I did so far keep jerking results me. On my side, the file size is not a problem, so I put the levels up, reduced the value of middle managers, upped the bitrate.

  No luck so far.

  Anyone would be interested in checking this file and tell me if something can be done, and what are the parameters required to have one as smooth as the original .mov .mp4?

  120 MB zip, inside is a 400 MB .mov file (deleted, this one has been well export...)

  2 a-FolioOverlays - Multimedia.mov.zip - Google Drive

  OK, the solution was to take the offending .mov Apple Lossless Animation file, import into the back of screenflow and export again as a ProRes Lossless with Alpha then re - encode the file with the media encoder.

  Advantages: does the job

  Cons: File was 7 GB (from a 900 MB file) and needed 3 steps.

  Hopefully I can find a better solution

  (Thanks to Alex from Telestream (@ScreenFlow) desktop support and @AdobePremiere @EricPhilpott @sPECtre @sebgaillard @dguidot @sbaril for the son on Twitter)

• How to convert AVI files for first CS4 (Mac) with VLC - Please Help!

  Hi thanks for the reading-post it here for the first time.

  I'm another grass sorry, trying to convert AVI files, so I can import them into first CS4 on a Macbook Pro laptop. I am using VLC on the macbook to perform the conversion. I don't want to use free converters such as iSquint (tried and many others) b/c they cause a significant loss of video quality. But I'm trying to do it for free! (I'm broke).

  Been read tons here and on other forums to get advice first, but in my view, none is really specific to my situation.

  I'm fine (slight quality loss) video but NO Audio. I want the audio too!

  AVI files seized on an old NV3 camera SD card.

  VLC said the Codecs for these files I got off the SD card are as follows:
  0 workflow:
  Type - video
  Codec - MPEG - 4 (XVID) video
  Resolution - 640 x 480
  Rate - 30

  Stream 1:
  Type - Audio
  Codec-MS ADPCM (audio ms)
  Channels: Mono
  Sampling frequency - 22050 Hz
  Bits per sample - 16

  I tried several different configurations with VLC conversion according to the documentation of "Supported file Formats for import in first CS4": http://help.Adobe.com/en_US/PremierePro/4.0/WSf52ca809ac8f6c7135876f961243120b72d-8000.htm l

  For example I tried to convert the same file as follows:

  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 192-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/MPEG Audio 128-bit
  Wrapper MPEG 1 - converted with MPEG-2 VID 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MPEG Audio 16 bit VID
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MP3 Audio 16 bit VID
  
  When converting to MP4 (MPEG-4) I get a general error while importing first so no dice on that, and I tried a lot of other configurations/combinations, but not all. 

  I check each result with VLC before import into the Prime Minister and they play both audio & video fine with VLC.

  My question is the following: what settings can I select in VLC for audio first? Or if there is a specific codec I need to download and install a download link... would be much appreciated.

  Alternative solution?...

  If I put these files on the SD card in my camera and click on and drag them on the macbook pro laptop as AVI files (instead of dragging to a PC first, as was the case)... don't you think it would make a diff?  Also, I tried sucking to the top of the camera first, but that didn't work... the camera turns on when connected to the computer... so that you can not navigate to a file on the camera and then use the GUI first to suck.

  I have a laptop. These original files play well with Windows Movie Maker because I downloaded the appropriate codec. Hi and low tried a mac version of this codec without result. CS4 my install discs do not work on Windows/PC. Trust me I wish they did! Even the configuration required on the package is in the absence of any mention of Windows. Windows Movie Maker convert .mov... that was my first game b4 plan, I realized that VLC was quite robust and user-friendly in its Export Wizard codec functionality.

  Any help would be much appreciated! I swear! I'm banging my head against the wall and I want to just change already!

  Thank you!

  Do not use the flow function; This isn't what you are doing.  (Although technically, I don't think it matters)

  Use the convert/save option.  The first screening, video - H.264 + AAC (MP4), should work great.  Don't change anything.  Save the file with a MOV or MP4 extension.

  If you get audio weird sounding, then create your own preset that matches the Video - H.264 + AAC (MP4) preset, uncheck only Audio the Audio tab and convert to video.  Then run convert/Save using the Audio - CD preset.  Save the file as a WAV (or an AAC?).

  Import the 2 files into PR.  You shouldn't have synchronization problems if the points are aligned in when you add them to the sequence.

  -Jeff

• Export from Photoshop Elements 6 for first Elements 8

  I have prepared a slideshow with the Organizer in Photoshop Elements 6 and produced a DVD that has a good image quality but not excellent (I chose File - high setting of 800 x 600). In order to improve the image quality of DVD, I installed the trial version of first Elements 8. I've exported the first Elements 8 show and have several problems.

  1 the picture quality of the DVD produced by first Elements 8 is worse than that produced from the Organizer (Photoshop Elements 6).

  2 titles, transitions and the Bo does not show in first Elements 8.

  3 the sequence of slides in first Elements 8 is different then the slide show in the Organizer (Photoshop Elements 6).

  At the same time a menu pops up asking me if I wanted to convert the catalog to the V6. I refused because I was afraid that the catalogue of the V6 can be replaced, and I wouldn't be able to come back.

  Help, please.

  CarlosWA

  CarlosWA

  Conclusion.

  My results are in agreement with your problems are NOT associated with Photoshop Elements 6 slide show used instead a Photoshop element 8 slideshow in the slideshow transfer to first Elements 8.

  To the test. Photoshop elements 6/first Elements 8.

  First, I created a slide show in the Photoshop elements 6 Slide Show Editor. It consisted of:

  (a) 19 jpeg photos each with dimensions of 3264 x 2448 pixels (which is not recommended to pixel dimensions but which has been used to highlight the project if possible... these photos are grossly oversized since the goal is a DVD VIDEO with standard 720 x 480 image size).

  (b) I used a transition wipe between each

  (c) I used the text inside photos (included in the text was a sequence number so that I could more easily visually follow the sequence of slide show after he was transferred to first Elements 8)

  (d) I added two audio clips as soundtrack (the first one I placed the start just before the last two photos to return on any audio synchronized as well as the loss of a full audio clip)

  (e) I used a pan and zoom for photos 1 and 2 effect.

  The quality of the preview in the editor of Photoshop elements 6 Slide Show was good.

  I issued the editor of Photoshop elements 6 Slide Show slide show, using the slide show option change out 'send to Premiere Elements '. When I did, first Elements 8 open, I put the project preset, and he accepted the slideshow. In the area of media project were

  a folder that contains all the individual components of the slide show

  (b) slide show (Group) video file

  The Visual form (grouped) was automatically placed on the Timeline as well.

  Everything transferred correctly. No problems. SEE IMPORTANT NOTE below.

  I burned even the content of the standard calendar DVD VIDEO of first Elements 8, and the standard DVD VIDEO read on my 19 LCD Widescreen TV.

  To the test. Photoshop elements 8/first Elements 8.

  I repeated the above with Photoshop Elements 8/Premiere Elements 8 and the same show and got the same results.

  IMPORTANT. Be it Photoshop Elements 6/first Elements 8 or Photoshop Elements 8/first Elements 8, I had to return the timeline in the Mode change in order to get the best possible overview so that I could determine or confirm what was on the chronology of the elements of the first. And, making chronology as described with all these pictures oversized took several hours.

  That's what I need to know:

  1 how many photos have you used in the slide show in the Photoshop Elements 6 or 8 slide show, and what were their dimensions in pixels? If you do not know, you can check in the dialog box elements Photoshop Editor, Image, picture, Resize the Menu size or just place your path of the mouse on the file on the hard drive and note the 'dimensions '.

  2. If you transfer your slideshow of Photoshop Elements 6 or 8 for first 8 Elements, use the option 'Send to Premiere Elements' Output and get your slide show on the chronology of 8 items first, you make this timeline by pressing the Enter key on the main computer keyboard so that the red line on the timeline goes green when the process is complete?

  3. your computer optimized, defragmented, cleaned, scratch your files to an external hard drive (NTFS formatted), etc. If you use an external hard drive for scratch files, is there enough space for them?

  4. What is your operating system and what are its resources, for example, the RAM available and free hard drive space. Have you checked your virtual computer memory implemented?

  Stay course on it to rule in or out the wmv not above approach to get your slideshow as a VIDEO DVD. But if you decide to make a detour to save the movie as file .wmv and you deal with oversized photos and a faulty component in the slide show, the writing of the .wmv becomes a possible focus point to find errors. And, if the .wmv is intended for DVD-VIDEO, and then use the (also known under the name of profile) file size = DVD NTSC (720 x 480).

  I suspect that the heart of the problem is going to

  (a) the use of oversized photos

  offending component b in a slideshow
  (c) the size of the slide show

  (d) computer resources

  (e) a combination of all or part of the above

  I will continue to monitor your progress.

  RTA

• I just bought Acer T232HL monitor but I can't its come to the monitor

  I just bought Acer T232HL monitor is it came with built-in speaker. I can't get the sound to watch

  SOLVED *.

  I found several possible solutions here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-c...

  My solution was to re - charge the Intel Graphics Driver for my Core i7 Integrated GPU such as mentioned on page 4 of the above link.