Loss of the BT connection after hibernation/standby and cannot associate BT keyboard + mouse
I have a laptop from another manufacturer with a stack of Toshiba v4.00.31 BT.
I tried to pair it with a Logitech diNovo keyboard, media and the mouse pad.
Question 1: could not connect all three at the same time (can only do 2)
Question 2: when the laptop hibernates / goes on stand by, I can't reconnect to the keyboard and mouse - I have to remove and repair
Any ideas would be appreciated
Veillon
The Bluetooth stack seems to be old. Try to update first to make sure that all the features (especially power save) of your new hardware Bluetooth (mouse) are supported.
Tags: Toshiba
Similar Questions
-
I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection. Whenever I stopped him it and I have to choose. This does not happen on another laptop or desktop that I have. Is there a safe solution for this?
Hi Ron,
1 Windows operating system you are using?
2. you receive messages or error codes?
You can read the following article and check.
Windows wireless and wired network connection problems
If you use Windows XP, then read the following article:
How to troubleshoot wireless network connections in Windows XP Service Pack 2
This problem can also occur when the power management profile turns off your network card.
You can try the following steps and check if it helps.
a. click Start, type device manager in start search and press ENTER.
(b) in Device Manager, expand network adapter.
c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.
d. go to the power management tab.
e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).
f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.
-
I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?
Debbie
How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.
How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?
What error messages are reported?
Event Viewer reports
1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.
2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.
3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.
4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.
5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.
6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.
7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.
-
Lose the FTP connection after you put the computer to sleep
I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.
Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?
The FTP queue time is set by your web hosting provider. I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational. You shouldn't have to restart DW well in order to get a connection. Simply by clicking on the login button in the files panel should do the trick.
-
Original title: cannot run Windows Update
I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Can someone help me please? Thank you.
I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Can someone help me please? Thank you.
[1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK
To disable the horse notification that appears in the status bar on automatic updates is turned off.
Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates
[2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8
http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx
[3] manually download and install the latest cumulative security for IE8 update and restart the computer before
visit windows update via the shortened link in your Start menu.
When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.
Restart after installing IE8 cumulative security update. It should restart when installation is complete.
[4] now to connect to windows update manually through your browser using the shortcut in the start menu link. Ignore the warnings, recommendations to turn on automatic updates.
Report back please on the status and please report problems with error codes. Thank you.
Recommend you not install MSE but rather install a free antivirus like Avast or AVG.
Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems. Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.
-
Original title: install SP3
I did a clean install of xp with sp2, hear automatic updates. After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view. I tried options suggest they also get the same message or fail to load.
I did a clean install of xp with sp2, hear automatic updates. After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view. I tried options suggest they also get the same message or fail to load.
Just install Windows XP SP3 manually...
Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)
Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Download at least Internet Explorer 7 (if it is not Internet Explorer 8).
Install it.
Reset.
Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.
Back - let everyone know if it worked for you.
-
Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.
Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?
Hello
Check your level of service current pack...
- Hold down the Windows (between Ctrl and Alt) key and press Pause break
- Examine what is listed in the system: section
If there is no service pack designated first level you must download SP2 from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28
.. .and then run the downloaded program to install SP2.
Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24
For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.
So try and get up-to-date with the Windows updates.
Tricky
-
Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).
YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!
Then, less than a minute later, you posted...
Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.
That one I'm supposed to believe?
-
I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.
original title: third party INF problems
Hi Paul,.
· Why are you using a USB port to create a network connection instead of using an Ethernet connection?
You can see the following article on how to set up a network.
How to set up a small network with Windows XP Home Edition (PART 1)
-
Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS
Hi Odile,
Thanks for posting your question in the Microsoft Community forum.It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.I may need a few more details to better understand the issue.
1. did you of recent changes on the computer before this problem?
2 do you have wireless or wired Internet connection?Method 1:
We'll first run check network troubleshooting if this can help.Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Method 3:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problemsFor more information, please see the link.Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-InternetGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence. -
The referenced account is currently locked and cannot be logged on to. How to unlock it?
This is the error I get when I enter the correct password also. I have Windows VISTA and I have a set a local policy for the account lockout threshold. My friend wanted to break my password without knowing it. It is not a domain account. Mine is an independent home PC. There is a single account that is my account. I tried in safe mode (even with the command line too), but even then I get the login screen & tell me to enter the password. If I enter the password, it says "the referenced account is currently locked and cannot be saved in. There is no fingerprint reader in mine either. So how I now access my account & see my Office I couldn't since 4 days now! Suggestions, please WELCOME!
Next time consider that to have a friend who does not really know what there mess in this connection with your computer isn't a good thing. Nor is defining an account lockout policy without knowing what you do or creating an additional administrative account so hot either.
The faster and easier to solve this problem is to enable (disabled by default) built-in Administrator account and set a null (blank) password. Allowing this account will put an icon for it on the logon screen so that you can then you connect, make an emergency administrator account (call it something like 'CompAdmin' or 'Tech' or other), change the passwords of other accounts, etc.. When you are finished, log on the built-in Administrator and in the "CompAdmin" account and disable the administrator built-in again if you want this additional security (recommended). Leave the account "CompAdmin" rise and future emergency situations given that the account for your daily work must be a Standard account. See the end of this post for general information on configuring user accounts in Vista.
http://home.eunet.no/~pnordahl/ntpasswd/
Download CD (.iso) image and burn as an image, not as data. You will need a third party burning software. Then boot with the CD that you created and follow the directions.
Once all of your changes, on the account of CompAdmin disable the administrator account integrated yet for security reasons:
Start Orb > Search box > type: cmd
When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:NET user administrator / active: No. [Enter]
General information of user accounts *.
You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
***Doing this requires a certain level of computer skills. You know better and if taking the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best course of action.
MS - MVP - Elephant Boy computers - don't panic! -
Win7 log in problems: "the referenced account is currently locked and cannot be saved in.
I've seen a few posts related to this error, but nothing of quite like what I feel... My service company COMPUTER is perplexed and they have tried a bunch of stuff at the end server without result, so want to recreate the image on my computer, I don't want to just cause it's a pain.
I have 2 computers in my workplace. A desktop and a laptop both running Win7 that connect on the server in domain of companies. I use the same username and password for both, of course.The problem is with the laptop. Occasionally when I try to log in, I get a notification "the referenced account is currently locked and cannot be saved in" and I can not connect. However, if I unplug the network cable and try it, it works. If I plug the power cable back in and lock the computer, restart the whatever, I can connect properly. However, after a few hours or days, it does the same thing.So I'm not completely locked out of the system. It's really annoying to have to disconnect the network like that.It has not always done this... It allows to work very well, but it seems to have just started for no apparent reason. The main difference between laptops and desktop, is that the laptop has Symantec PGP Whole Disk Encryption, while the office is not.Any thoughts on what may happen and what can I do about it?Hello
I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking
Please do not hesitate to contact us if you have other questions related to Windows.
-
Original title - manual update of Windows XP via "Windows Update" fails
07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet
Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »
This office has begun on about 3 days ago and just this morning appeared on the Tablet
I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things
I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December
Since then, they have had updates almost every day
And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI
Any body else having the same problem?
And help get the update of Windows XP to run again?
It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?
Download and install the latest cumulative security for IE8 update and manually restart the computer.
visit windows update via the shortened link in your Start menu.
Assuming that you have Win XP SP3 and IE8, it will be the necessary file
-
IT also included [error number: 0x800704DD]
Hi Raerenee,
Thanks for posting your question in the Microsoft Community forums.
I see from the description of the problem, that you can not install Windows Update and the error message 'the site has encountered a problem and cannot display the page you are trying to view, 0x800704DD ".
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
To provide the proper resolution, that I would need more information on your side.
1. What is the item numbers Knowledge Base updates failing?2. did you of recent changes on the computer before this problem?
See section B in the following link and follow the instructions.
Error message when you use the Windows Update Web site, Windows Server Update Services or Microsoft Update Web site to install updates: 0x800704DD
http://support.Microsoft.com/kb/968001/en-us
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.
-
"The backup file contains unrecognized data and cannot be used.
Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.
I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message. No catalog cannot be created for many, but not all of my backup BKF files.
I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.
Thank you.
You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP
I have no information other than what is on the web page.
Maybe you are looking for
-
Satellite L550 - 11K - support DDR3 memory?
My 4 GB DDR2 memory. My motherboard supports DDR3? Can my speed of DDR2 800 MHz, I switch to 1 066 Mhz?
-
API not installed - fix included
I use VirtualBench with installed software V1.1.1 and would begin work with the LabVIEW API, if I can do a generation of arbitrary signals, however, the API functions are not appearing under a measure i/o in LabVIEW 2013 or 2014 (and "VirtualBench" f
-
error 8024001 tried every thing cannot get updates to work
Vista updates in vista ultimate 64-bit
-
I use W8 for months and all of a sudden, while traveling, I can't connect to my computer. I get the error "your PC is offline.". Please sign in with the last password used on this computer. "I am sure that I use the password. I have a flash drive and
-
Add ' ns1: "to a tag xml in a PLSQL
Hi friends,in the xml belowI use DomNode approach to create the XML Coreand use the below querySELECT XMLSERIALIZE (DOCUMENT xmlroot((XMLELEMENT)"ns1:DeriveCoverageRequest,"XmlAttributes)"urn: xyz:ccw:config:common: data ' AS 'xmlns '.("urn: xyz:ccw: